Question about JVC RX-664V Receiver

Open Question

No sound from my JVC RX-664V Receiver

It just stopped producing sound from any source. It responds to the remote, but that's all.

Posted by on

5 Suggested Answers

VOTIT
  • 2071 Answers

SOURCE: JVC A/V Receiver RX 7042S - DSP NG

it seems the problem of your unit is in the power amplifier section,the IC chip there is defected that why only analog source .you better bring back to them the unit it is the only option, that is there back job...

Posted on Jul 03, 2008

tech48
  • 624 Answers

SOURCE: I have a JVC rx-6032v

yes, you must use the setup menu and assign the optical input to the input you are using. Some receivers have a "input mode" switch. If this one does, you only ned to press it until it says "optical". If you have a owners manual, it will decribe all the settings that need to be made to accomplish what you need.

If you do not have one, I have uploaded one to my website for you do have. It will only be there for a limited time before I remove it, so get it quickly. You need Adobe Reader to read this, so if you don't already have iton your computer you can download it free here:

http://www.adobe.com

Here is the link to the owners manual:

http://www.get1here.net/rx-6032v-ownersmanual.pdf

I would appreciate a "FixYa!" rating for this free information and manual. Let me know if I can be of any further help.

Dave

Posted on Jul 12, 2008

SOURCE: jvc rx-5032v audio/vido control receiver

HI MATE YOU NEED THE REMOTE

Posted on Aug 19, 2008

  • 24 Answers

SOURCE: Connecting Powered Subwoofer to a Receiver

you will need a line-level converter to use this subwoofer- it is a rectangular-shaped box with wires coming out on one end and red-and-white RCA plugs one the other. The end with the wires coming out will hook to the receiver, and the other end will need to plug into the sub.

Posted on Feb 21, 2009

lynchms
  • 93 Answers

SOURCE: JVC MANUAL

http://resources.jvc.com/Resources/00/00/96/LVT0018-001A.pdf

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a jvc rx-664v audio/video control receiver and it keeps saying overload what should I do


If it says OVERLOAD, you are playing it to loud, to long. Try playing it at 1/2 your normal volume. If it doesn't go into overload, that was the problem. If you have any additional questions, you may contact me at my website, audioserviceclinic.com. Thanks you.

Nov 05, 2014 | Audio & Video Receivers

1 Answer

How do i turn off the linear pcm on a jvc rx-6018v


The nature of a source's digital bitstream is automatically detected at the receiver. Look at your unidentified source and ITS manual for that answer.

http://www.retrevo.com/support/JVC-RX-6018VBKJ-Receivers-manual/id/315ag011/t/2/

See the box on page 14.

Sep 23, 2011 | JVC RX-6018V Receiver

1 Answer

Left front and left rear speakers do not work, they produce some sound but mostly static. The "phono" rca jacks also do not work.


Hello,
First off make sure that the cables you are using are functional. Also,check and verify the locations of the connections. You need an audio output from your source to an audio input at your receiver. If you run a video output from your source to an auido input on your receiver that will create strange sounds

Jan 07, 2011 | JVC RX-318 Receiver

1 Answer

JVC PC X-95 Boombox


Its moe than likely your laser. try swabbing it with a q tip and alcoholif that doesnt do it it might be the motor.

Dec 15, 2008 | JVC RX-664V Receiver

1 Answer

How much is a JVC RX 750v worth?


I have this same unit. It is many years old, and does not handle any modern codecs, nor home theater duties. It was, however, a very good unit for its day. If I were to sell mine, I would not accept less than 100 US with remote.

Nov 11, 2008 | JVC RX-664V Receiver

1 Answer

JVC A/V Receiver RX 7042S - DSP NG


it seems the problem of your unit is in the power amplifier section,the IC chip there is defected that why only analog source .you better bring back to them the unit it is the only option, that is there back job...

Jul 03, 2008 | JVC RX-6042 Receiver

1 Answer

Souround sound??


Make sure the button is depressed on the front for B.

Feb 23, 2008 | JVC RX-664V Receiver

2 Answers

Speackers


Hello 6423,

The RX-664VBK is capable of having 6 speakers connected to it, 2-front, 1-center, 2-surround and 1-powered subwoofer.
Hope this helps.

cancerags

Dec 28, 2007 | JVC RX-664V Receiver

Not finding what you are looking for?
JVC RX-664V Receiver Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...