Question about Sony DRU-810A DVD RW Dual Layer Burner

2 Answers

My new DVD-burner keeps ejecting

Just installed a new DVD-burner (Sony DRU-810A). The computer recognizes it but its rendered useless because upon starting up the computer, the DVD ejects itself, leaving the hatch open. When I try to close it it DOES close back up again, but only for a second. It then "ejects" again like it wants me to feed it a software disc or something. Inserting a disc doesnt do anything however. Please help! H. :-0

Posted by on

Ad

2 Answers

I've had same problem and found I had the DRU-810A as a Master and now I need to make it a Slave. The jumper settings on DVD are unreadable. Jumper for Master setting was on far Right. Which one is the Slave setting?

Thanks

Posted on Jan 30, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Try to solve the problem by looking into your PC. What all softwares have you installed? Are you having the problem when you are using some CD/Audio Players ( Does that program crash/hang usually ) ? Only install softwares that you think are useful. It can also be some maicious software. Always update you anti-virus AND anti-spyware. Uninstall all the unwanted softwares. If these dont help solve the problem,... I may help you if you could do the following steps. * When the problem occurs, open Windows Task Manager by pressing Ctrl, Shift, Esc together. * Under processes, note down the names of all the processes along with username and maybe memory usage. * Give all the particlars about your PC and post it to me ( Try "everest" from www.lavalys.com to prepare a report ). I shall look into the problem and try to help you.

Posted on Aug 05, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sony DRU-810A drive but my dvd writter dvd doesn"t working with dvd9 I like having diver update . thanks


You have to update the firmware. Go to http://sony.storagesupport.com/product/100
Download the instructions and the file with the recent firmware. I did it, No problems, no difficult.

Feb 10, 2011 | Sony DRU-810A DVD RW Dual Layer Burner

1 Answer

My Sony DRU-810A DVD RW Dual Layer Burner cant be detected by my pc.. is that it need to be installed the driver first or what?


You can try installing the driver first ,but you can also try just installing the drive then reboot and go to this link http://www.fixya.com/support/r5003649-find_24_trubleshooters_in_windows7 looking about half way down,you'll see a tool for fixing that drive.
Good luck.
Please rate my sollution.....

Jun 02, 2010 | Sony DRU-810A DVD RW Dual Layer Burner

2 Answers

Eject button not working.


Have you tried to go into Device Manager to see if there is any hardware or Firmware upgrades or try the Sony site! Check the link below.

http://www.cdrinfo.com/forum/tm.asp?m=122045

May 24, 2009 | Sony DRU-810A DVD RW Dual Layer Burner

1 Answer

VISTA 64-BIT and Sony DRU-810a DVD RW


An exclamation point means that there is a problem with the device. Could be as simple as a corrupted driver. Try unistalling the drive from Control Panel>Add/Remove Harware. Reboot; then reinstall drive. Hope this helps.

Dec 22, 2008 | Sony DRU-810A DVD RW Dual Layer Burner

1 Answer

SONY DRU-810A DVD RW


get version 1.0f from Sony:
http://sony.storagesupport.com/product/121
all will be okie :)

regards

Dec 11, 2008 | Sony DRU-810A DVD RW Dual Layer Burner

1 Answer

DRU-810A not booting bootable cds


check your boot order in your bios and set your cd drive to first boot

Nov 18, 2007 | Sony DRU-810A DVD RW Dual Layer Burner

1 Answer

Sony dru-810a dvd rw dual layer burner


try using TDK disks i rarely have a problem with them try doing a drive test using a blank dvd

Nov 01, 2007 | Sony DRU-810A DVD RW Dual Layer Burner

1 Answer

My SONY DRU-810A DVD Writer doesn't work with TDK DVD+RW Disc


some dvd brands dont work with all dvd writers, so your option is to try another make, if that works ok then it's not a writer fault it is just that the media make is not compatable. if you start to see problems with all makes of disc then the writer laser is faulty and a replacement drive neccasary.

May 11, 2007 | Sony DRU-810A DVD RW Dual Layer Burner

2 Answers

NOT WORKING WITH WINDOWS VISTA UPGRADE


Yet another Vista glitch, you may have to visit the Sony site for new firmware, but this MS knowledge base may relate to your problem. http://support.microsoft.com/kb/320553

Apr 13, 2007 | Sony DRU-810A DVD RW Dual Layer Burner

Not finding what you are looking for?
Sony DRU-810A DVD RW Dual Layer Burner Logo

1,303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...