Question about Akai PDP5090 50 in. HDTV Plasma Television

1 Answer

Blown board I turned on the tv and heard something pop. I opened the back up and one of the boards blew. Part # LJ41-00916A. I took it to a repair place and they said it will cost me $1o9o.45 to fix. Is there any way I can buy this board myself.... Help please

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 337 Answers
Re: blown board

Based on the part number what you need is the Main board,if you are sure call 888-498-7278 give them the part number and they can sell ou the complete board direct for 315.00 + shipping.Hows that

Posted on Sep 28, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Samsung TV Plasma heard a pop then screen went black red blinking screen

How old is the set? Are you attempting to fix yourself? The popping/no picture issue is usually do to a faulty y buffer or y sustain board. If you are willing to open up the set, I would look for blown IC chips on the y buffer (long skinny boards on the far left) boards and for any blown components on the Ysustain (located just to the right of the y buffers) board. If you are considering taking the set to a shop I'm here to tell you it will be cheaper to replace vs. repair. I hope this helps and if you have time please sign my guestbook

Jun 10, 2014 | LG 42PQ30 42 in. Plasma TV

1 Answer

Sylvania LC320SLX 32 in. LCD TV wont turn on

There is short circuited component/s at its main power supply regulator board. Check and replace them. It is best to replace the circuit board as card bassis, rather than trying to repair it.

Jun 13, 2013 | Sylvania LC320SLX 32 in. LCD TV

2 Answers

Heard a pop noise from LG 60PC1D tv, tv shut off and now the picture looks like a negative kind of...what is wrong?

Capacitor on the power supply popped and it is not allowing the proper voltage to be reached to the main board. This is messing up your picture. I would repair it before you create more damage from the blown capacitor on the power supply.

Please rate if this helped :)

Mar 08, 2011 | LG 60PC1D 60 in. Plasma Television

1 Answer

I have a RCA Plasma TV p42whd33. was watching tv heard a pop and the screen went blank. How do i fix this

This sounds alot like the same issue I had with my HP 42 inch plasma. Many plasmas had an issue with failures on the YSUS and ZSUS printed curcuit boards.

If you are willing and able to do some dissasemply yourself, open the TV and see if it uses these cards...if so then look at the solutions listed for the HP PL4260N TV issue.

I found the fuse blown on my YSUS board, I removed it and had it repaired by coppel TV..if you find a board that is bad, chances are someone on EBAY repairs them or swaps them out...mine cost $75 to repair and I was back in business...TV works fine again now that I had the board repaired.

Jan 22, 2011 | Flat Panel Televisions

1 Answer

I have aVizio VX42L HDTV10A. was watching a show when we heard a loud pop.Then all went dark. Would not turn back on. I took off the back cover and found the ceramic fuse was blown on the board # DPS-283AP...

This means you have a dead short, It is probably a Diode in the power supply area, but without testing board you don't know. If you know basic electronics, i would say check all diodes in power supply and look hard for something burnt and replace that also. Or just replace power board, check

Dec 08, 2010 | Vizio VX42L 42 in. LCD TV

1 Answer

Popping sound heard,will not come back on.sound heard when tv was being turned on

Some component failed, probably in the power supply section. Not something you are going to fix unless you are a tech. You can try and open the back and confirm damage to the power board. And possibly buy another board on ebay, but be carefull. Some parts sold there are bad .... This assumes that the set is out of warranty.

Apr 02, 2010 | LG Flat Panel Televisions

1 Answer

We have no picture

If it was just a capacitor that blew, take the board into radio shack and see if they have a replacement. You may get lucky and be able to pull off a repair for mere dollars, vs spending over a hundred on a new board. Usually there is someone in the store that can show you how to remove the old component and replace it properly. PLEASE be aware that these large caps can put you in the hospital if you cross the leads while its powered on. And be careful to match the polarities correctly. All else fails, check or ebay for a new board.
Good luck!

Mar 17, 2010 | Element Electronics FLX3210 32 in. LCD TV

1 Answer

Vizio L32 HDTV - Blew Out, No Power

Yes, I do in home warranty work on vizeo, it sounds like you need a power board and perhaps a main board. The power board is what pooped.

Nov 13, 2008 | Vizio L32 32 in. LCD HDTV

2 Answers

Gateway GWT-P42M303 screen problem

the 15v is shorted to the ysus board and probably one of the two big heat sinks with the number 4921QP1002B is the cause. If you don't repair it can I have it for parts?

Mar 30, 2008 | Gateway GTW-P42M303 42 in. Plasma...

Not finding what you are looking for?
Akai PDP5090 50 in. HDTV Plasma Television Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers


Level 3 Expert

6993 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides