Question about Computers & Internet

1 Answer

Wyse Winterm 3235LE sound card inconsistant

I've bought a second-hand unit to use as my sibling's homework and research "computer". However, after setting it all up, I discovered that the sound output device fails to operate most of the time. I have tried putting a fan on it to cool it down, however this doesn't semt to solve the problem.
The computer I'm using (for now) is a windows 2003 R2 Enterprise Server in trial mode for 120 days (about 97 days left now, solely to make sure it isn't my winXP machine's fault for this) and other /normal/ computers can connect to it through remote desktop connection, with sound (although the sound recieved is a little delayed, but this is not unexpected).

Steps:
In an RDP session, start windows media player (or whatever, so long as it puts out sound) and begin playback.

Watching the network utilization, observe how much data is put through during non-sound output and with sound output.
Notice that after a short period of time playing, windows media player will stop playing, presumably to let the device "catch up" on outputting the sound. All other functions (screen writing etc) are working normally.
After a bit, windows media player will continue playback even though very little sound has been output (most of it is garbled garbage anyways. Not too pleasant). Notice that despite the fact that windows media player is "paused" (the status is still "playing" yet the tracker is stopped) the application is not frozen and any visualizer will continue to run, although as if the media being played is blank (ie the scope visualization will flatline) during periods of "waiting".

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

MY SISTEM IS NOT SOUPTE THE SONUD

Posted on Dec 13, 2008

3 Suggested Answers

SOURCE: I have a 3235le with wince 2.12. How can I upgrade the RDP client to 5.1 or 5.1+?

I tried to do the same thing but ran into the same problem - I gave up. However, I have been successful in loading RDP 5.1 onto a Wyse 8235LE. Works great with full resolution RDP sessions!

Posted on Sep 10, 2007

  • 3 Answers

SOURCE: Problem with WYSE Winterm 3235LE

Tsaukpaetra is correct it's a resolution mis-match with the monitor you are using. If you have Rshadow loaded on the winterm you can VNC into it and change the resolution. If not you can hold down the letter "G" on the keyboard to perform a factory reset.

Posted on Dec 16, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Websites are blocked im on my school computer


Of course the are !
The school staff don't want you wasting your time and their resources in social networking, so most probably you won't be able to access Facebook, Twitter and the like.

Jun 02, 2010 | WYSE Winterm 3235LE Network Terminal

2 Answers

Purchased used wt9235le and don't know logon id or password,how do i crack


Hi, if it is similar to the 3235LE you can reset them by holding down the "p" key whilst powering on the device.

Jan 20, 2010 | WYSE Winterm 3235LE (90202401R) PC Desktop

3 Answers

WYSE 3235 thin client needs bios flashed


The easiest way to would be to take apart the machine so that the motherboard is exposed. Once you do, you will see a small, circular watch-like battery. Remove this for about 15-30 seconds. By doing so, it will perform a hard restart when the BIOS memory is cleared and you will have your original factory settings. If this does not work, consider the ports/card for the peripherals. Perhaps it is a hardware problem.

Dec 01, 2008 | WYSE Winterm 3235LE (90202401R) PC Desktop

1 Answer

I have a WYSE 3235LE thin client in a Sears retail environment. I need to reset the bios. There is a way to flash it from another terminal but the bad box won't boot. It stops with keyboard/mouse error....


The best solution for resetting the bios is to do a hard restart. This requires you to get to the motherboard and take out the battery for about 15-30 seconds before replacing it. By doing so, the temporary memory in the BIOS is erased and you will have you factory settings.

Dec 01, 2008 | WYSE Winterm 3235LE (90202401R) PC Desktop

1 Answer

How to disable auto login on 3235le


Hit the ALT key and F4 while auto logon is counting down to cancel auto logon.

If you've forgotten the admin password you can perform a factory reset by holding down the 'G' key while powering the device on.

Nov 20, 2008 | WYSE Winterm 3235LE (90202401R) PC Desktop

2 Answers

Problem with WYSE Winterm 3235LE


Tsaukpaetra is correct it's a resolution mis-match with the monitor you are using. If you have Rshadow loaded on the winterm you can VNC into it and change the resolution. If not you can hold down the letter "G" on the keyboard to perform a factory reset.

Aug 29, 2008 | WYSE Winterm 3235LE Network Terminal

1 Answer

Unusual problem


Perhaps the systems have accumulated dust on the inside, and therefore the unit could be overheating.

Oct 16, 2007 | WYSE Winterm 3235LE Network Terminal

1 Answer

I have a 3235le with wince 2.12. How can I upgrade the RDP client to 5.1 or 5.1+?


I tried to do the same thing but ran into the same problem - I gave up. However, I have been successful in loading RDP 5.1 onto a Wyse 8235LE. Works great with full resolution RDP sessions!

Sep 03, 2007 | WYSE Winterm 3235LE Network Terminal

1 Answer

No display in monitor


This may be the problem with the WYSE driver. Ensure that correct driver is intalled and colour profile is compitable. Syncmaster is auto detected by window based OS.the message "Sync out of range" comes due to improper out put video signal.

Jul 24, 2007 | WYSE Winterm 3235LE Network Terminal

1 Answer

Wyse wt3235le running on windows 2000 server


OK What ya do is right click the desktop and go down to properties.. open this and there ya should be able to adjust ya resoloution and colour... It's max is 1024 x 768.

Jun 03, 2007 | WYSE Winterm 3235LE Network Terminal

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...