Question about GE Kitchen Ranges

1 Answer

Display goes blank, no heat, no oven

GE JCSP42SKSS range just stopped working. No error code or anything not even a clock. All buttons are dead.
When I turn one of the knobs to start one of the surfaces, clock appears, and I can use buttons on a control panel but the surface still cold and oven doesn't work either. As soon as I turn knob off, display goes blank as well.
This happened once last week, but after turn off/on stove was working. Not this time though.

Posted by on

  • 1 more comment 
  • igorchest Nov 03, 2008

    I have breaker. Reset it several times - to no avail. Besides, I think if I would have 120 working, the clock would be working all time. But it is not. Clock appears only when I turn surface on. Very strange...

  • igorchest Nov 03, 2008

    I see what you are saying... I'll try to check a voltage on a range - my voltmeter needles are too short to check in the outlet.
    BTW, can breaker itself become damaged somehow? I mean, fuse you just replace. But breaker - can it become damaged during normal use?


  • igorchest Nov 04, 2008

    It was exactly what you suggested - only one line was working. The problem was not in the breaker, but a loose contact in the outlet. Thanks a lot!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 147 Answers

This I hope will be an easy solution for you. I think you have a circuit breaker tripped or a fuse if you have a fuse panel.. I am guessing you have an old fuse panel. When you have a fuse blown on a 230 volt appliance and you turn a swith on (like your knob) it feeds back to other circuits on the 120 circuits and will make it do crazzzy things, like making lights and clocks work..Regardless if you have fuse or breaker you dont have the 240 volt to run the range..You only have one120 volt leg powering your stove.

Posted on Nov 03, 2008

  • 1 more comment 
  • butch welch Nov 03, 2008

    Depending on the type circuit breaker you have, When you reset it, push hard off, then turn it back on.

  • butch welch Nov 03, 2008

    You have 2 lines going to your stove, each 120 volts. the burners use both of them to heat. the clock and display uses only one of them to lite up. If the one going to the clock is not there of course it will not work and the burners will not work, but when you turn your knob on that 120 volt circuit that is there will feed thru the burner and provide voltage to the clock circuit and thus the displays will lite. I can tell you as a license electrician, you dont have 240 volts going to that stove. Did you try turning off your breaker. push it hard off. Sometime breakers are hard to reset. Do you have a volt meter.

  • butch welch Nov 03, 2008

    Sure breakers can look good but be bad.. I dont think you are turning it off like I am telling you to do. Turn it off with some force, with your thumb and push it hard off. then turn it on..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE Model J S968S0F4SS. During bake display goes bake, oven turns off.


Oven Does Not Heat, But The Burners Heat - GE Appliances

products.geappliances.com/appliance/gea-support-search-content?...
Range - Oven Does Not Heat, But The Burners Heat. To minimize the ... Turn yourrange OFF and either remove the fuses or turn the breaker OFF. Then unplug ...

How To Fix Oven With Little or No Heat When Baking ...

Troubleshooting Why Your Oven Won't Heat ' PartSelect ...

? 2:54
https://www.youtube.com/watch?v=ketJHf3rrSk
Sep 14, 2011 - Uploaded by PartSelect
In this video you'll learn why your oven may not be heatingproperly. ... Neither the bake or broil elements ..

Oct 31, 2015 | GE Kitchen Ranges

1 Answer

Frigidaire oven won't work. top range works fine, but digital clock and digital display stopped working which works oven, so oven also will not work f11 code


Hello steve o - Typically error code F11 indicates a shorted keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if the error code does not clear contact a professional to move forward accurately. Most likely the EOC on the range will need replacing.

Nov 12, 2012 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

GE spacemaker range model number jmp28g0r1wh display goes blank and oven turns off


the model number isn't correct.check and send the model number again.if you changed the sensor this should take care of the f3 error code but the clock shouldn't go blank and oven stops.like i say your model number doesn't show up as a good number,if this machine has a fan in it you could have a bad fan motor,the fan cools off the electronics and if it isn't working the clock assy. can get hot,damage it and it will do this,also i've seen on some models there's a screen where the fan is and dust gets stuck on the screen and the fan can't blow any air,i'm just telling you what i've found before but it sounds like the clock assy. is heating up and shutting down,if there isn't a fan in your model it sounds like you have a bad clock assy.if you send the model number i can look it up for you.

Nov 15, 2011 | Kitchen Ranges

1 Answer

I got an F7 error code and now the display is blanked out. JTP20 series wall oven


F7 Stuck Button
1. Function pad button stuck or
2. Bad clock. Try to free stuck button or
3. Replace Electronic Range Control (ERC).

Nov 25, 2009 | GE JTP20 Electric Single Oven

1 Answer

Kenmore Electric Range Model # 790.95664100 All display lights are off until you turn on a heating element control knob. Then the time display starts flashing "12:00" along with a short buzzing sound...


Sounds to me from the information you provided that the auto timer is set...when the auto timer gets set you are generally unable to use the oven. If the auto timer is not set then you are looking at a problem with the Electronic oven control..do any error codes show up f1 - f2 - f3 and so on?

Jun 23, 2009 | Kitchen Ranges

2 Answers

GE JCB909 Range - Blank display


suspect wrongly wired from new

Jun 25, 2008 | GE Ovens

1 Answer

Jenn-Air JES9860 burners and oven stopped working problem with display


sounds like you lost power to your stove. if you can't reset the clock, it needs to be replaced. in otherwords, the power outtage shorted out the clock.

have a technician replace it.

Jan 14, 2008 | Jenn-Air JES9860 Electric Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

162 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...