Question about PC Laptops

1 Answer

Window xp display

Whenever I reboot my pc display come in small than monitor and i reset display setting to 32 colors and change to full screen again .But when I finish working and again start pc same small screen come 8 bit color and hardware found message come whenever I start my PC

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

This should be your graphics card driver is not it. The original installation of hardware drivers may be better.

If that is not what system you set up the software in question. Can be re-systems.

http://www.notebooks-driver.com

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rotate screen back to normal


Computer users occasionally have a need to rotate, or "flip," a monitor display to be better able to read long documents or to view pictures. Because rotating a computer screen is such a basic function, modern operating systems (Windows XP and up) include hot keys and display options that enable the user to rotate the computer screen by 90, 180 and 270 degrees. Rotating the computer screen allows for more display options. For instance, when rotated 90 degrees, a 1680x1050 monitor becomes a 1050x1680 monitor, which provides more vertical pixels than a standard display.

Windows XP/Vista Monitor Orientation
Minimize any windows or programs to the taskbar. Click the desktop. Press "CTRL" + "ALT" at the same time. Press one of the arrow keys to flip the monitor orientation by 90, 180 or 270 degrees. The left arrow rotates the computer screen 90 degrees; the down arrow rotates the computer screen 180 degrees; the right arrow rotates the computer screen 270 degrees; the up arrow resets the monitor orientation. Rotate the computer screen in Windows Vista by opening the Control Panel, searching for "Tablet PC" and changing the "Orientation" drop box to the desired rotation. b> Windows 7 Monitor Orientation b> Click the Start menu at the lower-left hand part of the screen, and open the Control Panel. Select "Display," then click "Change display settings" from the left column. When using multiple monitors, select the monitor that you would like to rotate. Click the drop box next to the "Orientation:" option. Select the desired rotation and click "Apply." Click "Keep Changes" or "Revert," depending on preference. Click "Apply" in the Display Settings window. Click "OK" to finish.

Feb 23, 2013 | Gateway PC Laptops

1 Answer

Acer tablet troubleshooting


Computer users occasionally have a need to rotate, or "flip," a monitor display to be better able to read long documents or to view pictures. Because rotating a computer screen is such a basic function, modern operating systems (Windows XP and up) include hot keys and display options that enable the user to rotate the computer screen by 90, 180 and 270 degrees. Rotating the computer screen allows for more display options. For instance, when rotated 90 degrees, a 1680x1050 monitor becomes a 1050x1680 monitor, which provides more vertical pixels than a standard display.

Windows XP/Vista Monitor Orientation
Minimize any windows or programs to the taskbar. Click the desktop. Press "CTRL" + "ALT" at the same time. Press one of the arrow keys to flip the monitor orientation by 90, 180 or 270 degrees. The left arrow rotates the computer screen 90 degrees; the down arrow rotates the computer screen 180 degrees; the right arrow rotates the computer screen 270 degrees; the up arrow resets the monitor orientation. Rotate the computer screen in Windows Vista by opening the Control Panel, searching for "Tablet PC" and changing the "Orientation" drop box to the desired rotation. b> Windows 7 Monitor Orientation b> Click the Start menu at the lower-left hand part of the screen, and open the Control Panel. Select "Display," then click "Change display settings" from the left column. When using multiple monitors, select the monitor that you would like to rotate. Click the drop box next to the "Orientation:" option. Select the desired rotation and click "Apply." Click "Keep Changes" or "Revert," depending on preference. Click "Apply" in the Display Settings window. Click "OK" to finish. Hope this helps

b>

Jan 14, 2013 | PC Laptops

1 Answer

Colour setting keeps reverting from 32 bits to 8 bits


Turn the laptop on and hold down the "Fn" key on the laptop's keyboard.


Tap the arrow key that has a picture of an open sun to make the laptop screen brighter.

The laptop will automatically save the adjustments after you release the "Fn" key.


Tap the arrow key that has a picture of a filled-in sun to make the laptop screen darker.

The laptop will automatically save the adjustments after you release the "Fn" key.


Screen Resolution


Click the "Start" menu. Click "Settings" and "Control Panel."


Choose "Display" and "Settings" in Windows 98, ME or XP. In Windows Vista, click "Appearance" and "Adjust Screen Resolution."


Click on the resolution bar and slide it to the right to lower the screen's resolution and to the left to raise the screen's resolution.


The optimum screen resolution usually depends on the size of the laptop screen.


The recommended resolution for a 15-inch screen is 1024 x 768, 17- to 19-inch screen is 1280 x 1024, and 20-inch screens is 1600 x 1200.


However, you can adjust the resolution to your personal preference.


Click ""Apply to see how the resolution looks on the laptop's monitor.


Click "OK" to save the resolution settings.


Color Setting


Click the "Start" menu. Click "Settings" and "Control Panel."

Choose "Display" and "Settings" in Windows 98, ME or XP.


In Windows Vista, click "Appearance" and "Adjust Screen Resolution."

Click "Colors." Choose 32-bit for a high color-pixel ratio that will make the colors brighter and bring out image details.


Choose 24-bit for a medium color-pixel ratio if the screen is too bright or if images are somewhat distorted.


Some older laptops have a 16-bit color setting, but this setting is no longer recommended as it will distort images and text.


Always Click "Apply" to see how the color setting looks on the laptop's monitor.

Click "OK" to save the color settings


hope this helps


Oct 14, 2012 | PC Laptops

2 Answers

My friend has a Compaq Evo N600c and brought it over because she couldn't get it to get online. Also, the display is out, so she has to hook it up to a monitor to see the screen. I figured after we got...


Graphics ATI Mobility Radeon, 64-bit video graphics (4X AGP) with 32 MB DDR SDRAM for increased color depth and graphics performance
Display (External) Up to 32-bit per pixel color depth
Supports 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1400 x 1050, 1600 x 1200, or 2048 x 1536 resolutions up to 160-Hz refresh rate, dependent upon monitor capability, resolution and color depth settings
Display (Internal) 14.1-inch color TFT SXGA+ with 1400 x 1050 resolution (up to 16.7M colors internal)
14.1-inch color TFT XGA with 1024 x 768 resolution (up to 16.7M colors internal)
Operating System Microsoft Windows 2000 only or
Microsoft Windows 2000 preinstalled/Windows NT 4.0 on CD or
Dual installation of Microsoft Windows XP Professional Edition/Microsoft Windows 2000 or
Microsoft Windows 98 SE


I would say that if the display was working, as Win2000 is nor driver based there would be an image on the screen. So I would say it is not a driver issue, it is a hardware issue and requires a screen.
There are no drivers available anyway.
Check out ebay for spare parts, you may fins a screen on there for not a lot of money.
The keyboard issue is probably a virus.
Hope that helps

Jan 23, 2011 | PC Laptops

1 Answer

1) I have a Toshiba Pro 600 model ps600c-01qw4. The problem of this laptop is that when i turn the computer on the screen is very small. So I went into the display setting and fix the problem. But when i...


Check the monitor in the device manager. NOT regular display properties. Make sure the monitor is the correct type. Try different settings in device manager for the monitor. Maybe try uninstalling the video card drivers, reboot and reinstall the drivers. Let me know if this does not work.

Joe

May 17, 2010 | PC Laptops

1 Answer

Game display only occupies the center portion of monitor not full screen. Thinkpad A22m w/ windows xp home SP3. Can't get the game screen to display on the full monitor screen.


It is most likely that the game is unable to operate at the resolution that your screen is set at and is compensating by sizing the game window to the required size. You might change you display resolution to a lower setting.
Hope this helps! Rate my solution!

Jan 07, 2010 | IBM ThinkPad A22m 2628 Notebook

1 Answer

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just go "crazy" displaying unintelligible gibberish.
If that's the problem, it's fairly easy to fix.
First things first ... let's get you a bootable system.
Boot in safe mode - press F8 when the Windows loader presents you with the 30 second list of choices, and then select "Safe Mode" as your boot option.
Right click on the desktop and click Properties, and then on the Settings tab.
Now click and drag the Screen Resolution slider to the far left ... you want the smallest settings that your screen will support. Typically that'll be 640x480, or 800x600.
Also change the Color Quality dropdown to 256 colors, or whatever is lowest. (You probably don't need to go as low as 16 colors, if that's presented as an option.)
Now, click on the Advanced button, and then the Monitor tab of the resulting dialog box. Change the Screen refresh rate to 60 Hertz.
OK your way back out, and reboot your machine. If these setting were the source of the problem, it should now be able to boot normally. You may not like the screen settings, but at least you now have a place to start.
"Start experimenting with the settings to see what does, and does not, work with your monitor."
If the display is still blank or gibberish, the my recommendation is to once again boot into Safe Mode, possibly Safe Mode with networking, and update your video display drivers. It's likely that they are incorrect or otherwise broken. Now start experimenting with the settings to see what does, and does not, work with your monitor.
I tend to start with the screen resolution. Once again right click on the desktop and click Properties, then Settings, and then drag the Screen Resolution slider a notch or two to the right to increase your display resolution. Now click Apply. It should change the resolution and display a small message box asking if you want to accept this setting. If you don't respond within some time, it assumes you can't see it, so it resets to the previous setting. If the screen goes blank or you can't read it, wait at least one minute before doing anything. The problem may resolve itself, and you'll be able to say "well, that resolution doesn't work", and move on to try another.
If, after a full minute or more the screen remains blank or unreadable, you'll have to reboot into safe mode, as we did originally, to restore your setting. (Why might this happen? Windows "remembers" and doesn't bother to ask you if you reset to something that you previously said worked. If you mistakenly said "this works" when it didn't ... perhaps by random keyboarding while the display was blank ... well, that could be how we got here in the first place.) You can repeat this process of trial and error for each of the screen resolution, the color depth and the screen refresh rate. (For CRT displays, you really do want the refresh rate to be as high as your monitor supports.)

Nov 28, 2009 | Dell Latitude D800 Notebook

3 Answers

Laptop screne displaying 1/2 orginal size. need to reset pls


Jak, Go to Start->Control Panel->System->Hardware->Device Manager-> Display/Monitor. Select the monitor and uninstall it. The Go to Actions and select Scan foe new Hardware. Windows will automatically detect the hardware and install the driver for it. Save it and reboot into full screen windows.

Oct 26, 2009 | PC Laptops

1 Answer

Pc display


This maybe due to lack of Video Card/Monitor drivers or the resolution is set to a small size. You will have to find out which video card you have, and if you have an LCD sometimes they come with drivers (Samsung LCDs have drivers). To find out what video card you have, you can usually go off the model name and number of your computer and get the drivers from your manufacturer's website. If it is a home built computer, you will have to look at the card/motherboard model and serial numbers to figure out the video card they use. Normally XP has a default video driver and it should not do a miniature resolution, but it happens sometimes.

Nov 03, 2008 | PC Laptops

1 Answer

Screen resolution resets to 800x600 after every reboot when d/port is connected.


You may have to set the monitors resolution to match the pc as they may be different.

Jan 13, 2007 | Dell Latitude D620 Notebook

Not finding what you are looking for?
PC Laptops Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Laptops Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...