Question about HP PSC 2210 All-In-One InkJet Printer

1 Answer

Hp psc 2110 all in one

The printer has 9 jobs in print que but will print nothing. I have tried everything in the manual and nothing works, it will not even print a self test report.

Posted by on

  • mommyluvs6 Nov 05, 2008

    Thank you to the techs. at Fixya. I ended up having to get a computer tech. out to work on the machine. It turns out that we have major computer and printer issues. We are going to try and uninstall, and restore the computer to it's original new state to see if it is salvageable, as for the printer we will see what happens. We uninstalled the old hp software, installed the latest drivers, etc. from the internet and it still will not work. Does not install properly. So this is anything that you guys could have helped me with. Thanks for the suggestions, they were all helpful and good, I just didn't have the average situation.

    mommyluvs6


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Try to clear out all old print jobs and then go to your printer,

Right click on printer Icon and check to make sure it is set as Default.

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Print que on hp 4300 says "printing" but nothing happens and I cannot clear que


Hello,

This is a common problem with Windows machines. If a print job gets corrupted in the print que it will stop and block all other jobs from printing. It will also block the job from being deleted normally. You have to stop the print que service and then delete the print jobs from the que. Here is a link to a full article that shows how to stop the que, delete the print jobs and restart the que to restore printing.

http://www.ccl-la.com/blog/index.php/how-to-delete-print-jobs-that-are-stuck-in-your-print-queue/

Nov 29, 2012 | HP LaserJet 4300 Printer

1 Answer

Right when i turn it on it makes noise hp psc 2110


Dose it work?

My hp 750 dose this and even talks when not working.

You can get HP Print Diagnostic Utility software which will fix most hp printers issues.

www.hpsupport.com

R Miss Brooks

Sep 02, 2009 | HP PSC 2110 Color Printer

2 Answers

My printer has a job waiting that I can't cancel. I've tried everything including turning off the printer to erase the memory, and completely restarting my computer. Nothing will delete this print job


your job is stuck in the printer que, to cancel this go to control panel, open printer and other, right click on the printer icon, delete the job in que (are you sure you want to delete, yes)..........and you are done

May 10, 2009 | Printers & Copiers

1 Answer

Scanner failure and the printer has a print job in que but will not print


Shut everything off and unplug the printer for at least 30 seconds. Reboot the computer. You might have to go into the control panel and cancel the print jobs and resend them.

Feb 20, 2009 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Print colors


You might want to run a cleaning page through it. This uses up more ink that a typical print job, but it will allow you to clean the heads and force ink through them.

Feb 14, 2009 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

Hp psc 2110 won't work in vista


Vista has the drivers for the HP psc 2110 embedded in the OS.

So, you should be able to print, with the default drivers. But, you will not be able to scan as of right now, unless someone releases an update for the HP PSC scanning software. I doubt that will happen, as these all in one's are so old.

Such a good little printer/ scanner/ copier too.. kind of sad to think its that obsolete that its not compatible for scanning.

Jan 19, 2009 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Printer trouble.


hmmm..ok

remove the old software.

go to www.hp.com and get new drivers

re install them

try it again

May 10, 2008 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

HP psc 2110 all-in-one wont print from internet


I'm assuming you went to the HP site and downloaded the Vista drivers??? Other than that try this:

  1. From Control Panel > printers... uninstall all printers.
  2. Unplug USB cable to printer and re-boot.
  3. Install Software.
  4. Plug USB cable back in.
Hope that fixes Ya...

Geno

Mar 26, 2008 | HP PSC 2110 Color Printer

1 Answer

HP psc 1210 will not print


Hi,

Please check the printer status at control panel printer properties if it is offline or ready. Restart your computer if necessary, you will notice all pending jobs will be printed as long as there is no problem with the connections of cables and drivers. Note: Do not cancel printing jobs in the middle of sending data mode to printer or queing instead you have to remove all papers on tray and wait for the error "paper out or empty" then there click Cancel. Hopes this helps.

Best regards,
Rosener Guyano

Feb 02, 2008 | HP PSC 1210 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 2210 All-In-One InkJet Printer Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...