Question about Lexmark X125 All-In-One InkJet Printer

2 Answers

Lexmark X125 have a Lexmarl X125 All in one. Never had any troulbe with it . I took the color cartridge(left side) out to replace it but the printer got used before I got the new one back in. Now it tells me to add left cartridge. I took it out & reinstalled it several times but still says the same thing. It does everything else & will print from computer but not when I try to copy. I cleared memory, ran maintenance etc. Please help!

Posted by on

  • dustygirl89 Dec 07, 2008

    There is no ON button. I just plug & unplug it. The error is on display screen. I have unpluged it all, phone, comp, etc. Waited plugged it back in & tried to run test. It Scans, Faxes, receives faxes, & I can print from comp when I send it to the printer. Just not when I put a paper in to copy.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try this..

unplug your printer from the wall for thirty seconds then plug back in. press the setup button on your printer. then press menu. press the options button until it says run test page. see if your black lines print out on your test page. if they still don't print, you should take a wet clean cloth and clean the copper strips on your ink cartridge. (you should see black ink on the cloth when your touch the little black sponge area just above the copper strip. Hope this helps.
Cassandra

Posted on Dec 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 558 Answers

This is very unusal with All-in-one printers. Have you try Hard reset till? Keeping the power on button press for 10 sec till it get on..

Also is the error showing on display screen of printer or at PC? Which Os is running on your PC.

Please also try this --> Power off the printer then computer, Unplug the printer from PC and then main power board--> then restart PC --> after then shut down PC and then again attach printer to PC and power on.

Let me know about the printer spooling if showing any error in Printer setting window.

Posted on Nov 03, 2008

  • Puneet Jain
    Puneet Jain Nov 03, 2008

    Also let me know if the other function like Scanning or Copying running ok or not.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Put in new color cartridge and it won't print color


Hello, the new color cartridge might not be seated properly or just needs cleaning. Here are some tips on what to do to remedy the problem. Remove the cartridge from the printer. Double-check if protective seal is already removed. Take a warm, damp paper towel. Set the ink cartridge on the paper towel like how it is placed in the printer - nozzles facing down. Drag the cartridge lightly across the paper towel in one direction (left to right) until the bottom of the cartridge looks clean. Reinstall and properly secure the cartridge in its place. Hope this helps.

Mar 16, 2010 | Lexmark X125 All-In-One InkJet Printer

1 Answer

Change color ink message won't clear from machine


look for the all in one icon, then choose the change cartridges, say to pc that are news cartridges, that will raise de ink level.

Jul 24, 2009 | Lexmark X125 All-In-One InkJet Printer

1 Answer

Lexmark x125


Follow the steps given below:
1. Snap the cartridges in and out three times.
2. On the operator panel, press Options to indicate which cartridges were changed.
3. Press Start / Yes.
4. Press Options to indicate the type of cartridge you installed.
5. Press Start / Yes.
If the problem persists, do the following:
1. With the printer powered on, remove both cartridges.
2. Unplug the power cable from the back of the printer
3. With the printer disconnected, insert the cartridges and reconnect the power cable.

Apr 09, 2009 | Lexmark Pro X125 All-In-One InkJet Printer

1 Answer

Installing ink cartridge in Lexmark X125


The front panel is hinged at the bottom so grab the top and pull towards you.  Under that is a protective cover, the one with the 2 paper guides.  towards the bottom of that there is a hole in the middle.  Put your thumb in it and lift the cover up.  Your carrier for the cartridge is under that.  Please Rate!
http://www.lexmark.com/publications/eng/x125/index.html

That link will give you the manual..just in case you need it.

Mar 11, 2009 | Lexmark X125 All-In-One InkJet Printer

2 Answers

I can't put cartridge back in printer


put the bottom of it in first and then press the top toward the back of the printer.

Mar 11, 2009 | Lexmark X125 All-In-One InkJet Printer

1 Answer

Lexmark x125 all in one won't print from memory.


Did you go into your printer properties and select new cartidge installed?  If this doesn't work, take the cartridges out and clean the contacts on the side and in the carrier with a qtip and rubbing alcohol.  Give it a few minutes to dry and reinstall the cartridges.

Jan 10, 2009 | Lexmark X125 All-In-One InkJet Printer

1 Answer

How to remove the ink cartridge from printer


gently pull the front panel towards you. then lift the back panel (towards the wall). your cartridges will come forward. gently pull them towards you to unclick then from the holders. there should be directions on the inside of the back panel on how to install/replace them. Hope this helps.
Cassandra

Nov 18, 2008 | Lexmark X125 All-In-One InkJet Printer

1 Answer

Lexmark X63 all-in-one printer shows "add left cartridge" after I already did and subsequently I receive printer busy message when trying to print. Worked perfectly before new left cartridge...


try powering off the printer for 30+ sec.... then turning it back on...
unplugging/replugging the cartridge and doing maintenance cycle
the printer's sensor are acting up and Lexmark won't really share how to reset these things, neither offer "logical" tips... The info given here was pretty much the Lexmark troubleshooting steps...

HTH

Aug 16, 2008 | Lexmark Pro X125 All-In-One InkJet Printer

1 Answer

Flashing error message


i have the same issue... i tried a few things, including resetting the printer (powering it off for 30+ sec and turning it back on) cleaning the nozzles on pc and manually... cleaning the connectors on the cartridge and cartridge caddy... all to no avail... a Lexmark rep told me I have a defective printer...

May 06, 2008 | Lexmark Pro X125 All-In-One InkJet Printer

2 Answers

Lexmrk x125 all-in-one printer


Hi,

As you do not have the disk with you, rather than finding the disk you can get all the software, drivers. manuals( user guide ) on the website. It is available free for you to download. I have mentioned the link below
http://support.lexmark.com/static/229-1-0-346.html

Hope you find all the info you are looking for on this link.
Will wait for the ratings.

Thanks
Sammy

Dec 05, 2007 | Lexmark X125 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X125 All-In-One InkJet Printer Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...