Question about E-Machines eMachines Desktop PC

1 Answer

D845epi mobo has flashing green light after power supply replacement

Nothing else happens. Nothing at all

Posted by on

  • Paul May 11, 2010

    Need more info... Do'es it try it start, what do'es the screen say ???????

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Unplug the power then unplug the 24 pin power connection from the mother board and take paper clip bend it so you can insert it into the holes where the green and the black wire are next to each other, Next you will need a multi meter. Set the multi meter to read dc volts 20 take the red lead and put it into the purple wire hole of the 24 pin connection and the black lead in to the hole with the Black wire on the 24 pin connection. the reading on the Multi meter should read 5.0 volts if it does not and you get a reading of 6.01 or higher then the Mother board has been burnt out and you will need to replace the motherboard and power supply I have been a onsite tech for E-machine for the last 5 years and this has been an ongoing problem with the power supply.

Posted on Nov 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I know if the power supply is bad on gateway gt5676 computer? I push power button and nothing happens. I unplug it and the green light flashes on the power supply( Bestec ATX 300 12 EB3). Plug it...


u can buy power supply testers, just a device you plug the power supply into, or try a new power supply. but if nothing is happening no fans etc theres a good chance its just the power supply.

Jun 17, 2012 | Computers & Internet

1 Answer

Gateway yellow power button, nothing starts, no fan, nothing. opened up computer and see mobo led light is lit. newton ps has a test button. tried to test with various components plugged in and the test...


Power supply has several voltages. Just because the 5v power is active doesn't mean all the voltages are OK. You need to have the power supply tested for 12v and 3.3v. A quick test is to unplug all the wires from the power supply. There is a single green wire on the motherboard main plug. Connect (use a bent paper clip) that green switch wire and any black wire. Plug in the power supply and it should run (fan starts)

Oct 26, 2009 | Gateway (ATX-300-12EB3) (ATX30012EB3)...

1 Answer

REPLACED MOBO INTEL D845EPI/845GVSR EMACHINE 2.5 P4 REPLACED PROCESSOR... NO DISPLAY OR KEYBOARD RECOGNIZED, NO BEEPS NOTHING BUT FANS ARE RUNNING AND LIGHTS ARE ON?


1.*********** Board not supporting Your Processor.
2. Try With Lower Speed Processor
3. Mahe sure that Mother Board is Working or Faulty.
4.Check the ram twice

If it HELPS RATE ME!

Jun 24, 2009 | Intel Desktop Board D845EPI Motherboard

2 Answers

I have a emachine PC. PowerSupply blew up. changed it still down


try to remove the memory and put it back again make sure put it fit and correctly

May 28, 2009 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

No display on monitor


Check your RAM card and Video adapter .Because problem of one of that thing computer wont on the monitor video.

Jan 10, 2009 | Intel Desktop Board D845EPI Motherboard

1 Answer

I have a media center cpm 1180n desktop, the green light on back of PS is blinking and when I disconnect the mobo is steady green however when I connect the mobo back to my MB and press the start bottom...


yes it sounds like the power supply is shot, you can get a replacement at any computer shop for around $40. i would put in a 400w or 450w that way if you add another hard drive or opitcal drive it wont be a strain on the new power supply

Nov 30, 2008 | Computers & Internet

1 Answer

My pc won't power on


Sometimes a defective / uder rated power supply is causing this. Defective power supply cannot provide the required load leaving your motherboard on standby mode (led green light) Try and check this first by replacing the power supply . Memory is another cause so if you also have spare you can run tests.

Jun 23, 2008 | Intel Desktop Board D845EPI Motherboard

1 Answer

No display


your board is having problem plz send it for repair

Apr 22, 2008 | Intel D845EPI (INTELKD845EPILPAK10)...

1 Answer

Seek Help


Sounds like the Power Supply may be going.

Dec 19, 2007 | Intel D845EPI (INTELKD845EPILPAK10)...

4 Answers

Dell dimension 5100 won't power on


might be a problem with the power button...try exchanging the power adapter and the reset adapter in your motherboard...this would become:

RESET BUTTON: as power button.

view your manual on where to find this adapters in your board.

Nov 19, 2007 | Dell Dimension 5100 (D51L1) PC Desktop

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...