Question about Insignia Televison & Video

Open Question

Remote for tv insignia #hydfsr-a205ep-2

Remote hase a signal but dosenot the control the tv

Posted by on

5 Suggested Answers

  • 2 Answers

SOURCE: jumbo universal remote

Universal remote codes for Insignia products: http://www.insignia-products.com/skins/Skin_1/Topics/Documents/Insignia%20TV%20Universal%20Remote%20Codes%207-9-07.pdf

Posted on Dec 28, 2007

ThaMp3Doctor
  • 8596 Answers

SOURCE: LCD TV

Here are the codes:
http://www.insignia-products.com/skins/Skin_1/Topics/Documents/Insignia%20&%20Dynex%20TV%20Remote%20Control%20codes%202-8-08.pdf

Posted on Mar 18, 2008

  • 3 Answers

SOURCE: universal remote and tv

I had the same problem. Go to the universal remote's manufacturer's web site and review their new codes for you Polaroid HDTV. They should have the code, and if you do not see it, then email them with the brand and model number of your set. Good luck.

Posted on Mar 30, 2008

SOURCE: Insignia TV code for Sony remote RM-V302

press tv, hold setup til tv blnks twice and release setup, type 10463 then power. 5 digit code not 4 like most.

Posted on Jun 19, 2008

  • 1 Answer

SOURCE: Need Insignia TV code for my Sony Receiver Universal Remote Control

Try This link it worked for me.
www.insignia-products.com/universalcontrolcodes.aspx

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A dialogue box on the insignia tv screen says no signal. Press input button on remote control. Then select the device you want to view. Be sure device is on.


what the message is telling you is to select the input source to use AV channel selection ( AV 1--AV 2--AV 3 etc )
antenna - dvd player , gaming console etc

Nov 26, 2016 | Insignia Televison & Video

1 Answer

Insignia 55 inch control buttons on tv don't work


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Aug 19, 2015 | Insignia Televison & Video

1 Answer

Insignia remote won't turn tv on/off itself


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Feb 23, 2015 | Insignia Televison & Video

1 Answer

I Have an insignia tv and lost the remote control, I was able to find a similar insignia remote control to the one I lost. How can I program the new insignia control remote I acquired to my insignia tv.


Hello
All Insignia TV remotes are not alike. The frequency of infrared rays out from each remote control will be entirely different to each other according tho the model numbers of the TVs and remote controls. A typical model will have same model number of remotes, and the remote you have got is with the same model of your tVs it must work proper. Otherwise you have to buy a new one for your Insignia TV model. you can bought from the authorised service center for Insignia at your town. If you have no access to authoised service center nearby you, just buy one universal remote control, which has set up codes for Insignia. . Check its manual, that it have setup codes for Insignia. OK.

Feb 05, 2012 | Insignia Televison & Video

1 Answer

I have Verizon FIOS for my cable - I just bought an Insignia TV and neither my FIOS nor Insignia remote control work on the new TV - how do I correct this situation.


The device is expected to have been acquired with a compartible remote control. However, a universal remote control is capable of powering the new TV only acquirable separatly at retail. Once acquired, the remote user guide provided the step by step instrucntions on acquiring transmittion signal from the new TV or very additional devices, sometime capable of being powered by once universal remote control.

Jan 18, 2011 | Insignia Digital-to-Analog Converter for...

2 Answers

Purchased Insignia 22


these remotes don't have a part #. The only way really is to just get one of those universal remotes or call insignia give them the serial # for your tv and they might have a part # for it. Other wise you might be out of luck.

Apr 22, 2010 | Insignia NS-L22X-10A 22 in. HD-Ready TV

2 Answers

Can't program my DirectTV remote to control my Insignia TV (no Insignia remote code on DirectTV's remote programming menu)


I have an insignia TV 32" and I used common code 10463 to program my direct tv remote. hope it works for you.

May 05, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Locked remote


i know this may sound silly but check the batteries. now if you allready changed them and your still having the same problem check the ir signal on the remote. now all you have to do is take any camera( camera phones work just as good) hold it to the ir sender on the remote press any button on the remote and look through the view finder on the camera. you should now see a light go off on the remote through the camera. if you dont see a light then you have yourself a broken remote. if you do then its possible its the tv ir reciever. and may need to be serviced. but hoping its the remote you can always get a replacment remote for cheep.

Jan 26, 2009 | Hisense TC24FS2H TV

4 Answers

Remote Control


From GUEST: I found this solution in the manual and will perform this task again to see if I can get the tv will be re-recognized again. Give this a try, too.


Remote will not turn on or shut off the TV.
• You must program the converter box remote in order to control your TV power button.
• To program the remote control:
    1. Determine if the TV is a model that can be controlled by the remote control. See "Controllable TV brands" on page 17 in the manual.
    2. Turn on the TV.
    3. While you press and hold TV POWER on the remote control, press CH ^ or CH v one or more times until the TV turns off. Each time you press one of these buttons, the remote control sends a manufacturer code (between 1 and 45) to the TV.

Sep 01, 2008 | Insignia Digital-to-Analog Converter for...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72271 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...