Question about Miele CVA2660 Stainless Steel Coffee Maker

2 Answers

The Miehle built in coffee maker - I want to stop the cleaning process but it won't clear

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

1. turn unit off 2. open door, turn power off for 5 secs. ( switch upper left corner )  3. turn power back on, close door. 4. press and hold clear, press on/off. release both simultaneously. 5. immediately , press clear 5 times holding it down the fifth press until the display changes. 6. with menu available, press more until option to reset cleaning appears, select reset cleaning. 7. finished

Posted on Jan 05, 2009

  • ronda Jun 25, 2012

    Thank you! This worked perfectly to reset machine.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

1 Suggested Answer

  • 1 Answer

SOURCE: built in Miehle coffee maker

need Miele instruction for descaling built in coffee machine.

Posted on Dec 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My miele coffee maker CVA 4070 how do I reset when it's locked in descaling


When you start the cleaning cycle, Don't stop the process by pulling the plug! Turnthe unit off from inside wait 5+ seconds & turn back on and thecleaning cycle should restart... If you do not use a cleaning TAB..Open& shut the LOOSE coffee Door under the drawer (Top Left) and thecycle will continue.

Jul 09, 2014 | Miele CVA4070 Coffee Maker

1 Answer

Want to clean the grinder part of my built in miele coffee maker.


Very Carefully with the power plug pulled out of the wall.
If you do not have the manual, go on line and have customer service send you a detailed instruction manual or have a technician take you through the process.

Mar 25, 2014 | Miele CVA4070 Coffee Maker

1 Answer

Blinking blue light on water reservoir won't stop blinking


Needle port is plugged. Clean with paperclip end and run it up 1/4 into the tank to clear the debris.

Apr 10, 2013 | Keurig B60 Coffee Maker

1 Answer

Keurig B60 coffee maker won't draw or heat and "not ready" stays on


Handel not in positive position to start brew process.

Jan 26, 2013 | Keurig B60 Coffee Maker

1 Answer

My senseo coffeemaker has stopped pumping hot water through the coffee pods. What do I do to fix it?


When was the last time you clean it with vinegar? Run vinegar through it and you will see hard water scales that were built on the heater. Coffee makers should be clean out every month then with 2 rinse cycles after that.

Jan 24, 2010 | Philips Senseo HD-7810 Coffee Maker

1 Answer

The light for CLEAN does not stop blinking


Clean it as directed. (I ran a load of vinegar through the coffee maker, then two loads of clear water.)
Then, turn the power off for a minute. When you turn it back on, the light should stay off.

May 13, 2009 | Mr. Coffee 072179228578 12 Cup Coffee...

1 Answer

Cleaning light came on and now, coffee pot will not work


Automatic clean function
The coffee maker is equipped with an automatic clean function. After 60 brewing cycles, the clean indicator/button (22) lights up. This indicates coffee maker should be cleaned by using the automatic clean function and the charcoal filter (17) should be replaced.
NOTE: The coffee maker can continue to be used, when clean indicator/button (22) is on.
• To begin the cleaning cycle, remove the charcoal filter (17) from the water tank (10). Fill the tank with a vinegar and water mixture (1/2 vinegar and 1/2 water) or a descaling product. Press clean (22) button for three seconds. The clean indicator/button (22) flashes and the cleaning process begins.
Cleaning process:
• 24 cycles of 7 seconds brewing and 21 seconds off
• 30 minutes rest
• Brewing the remaining descaling solution
• After cleaning process is complete the clean indicator/button (22) goes off. Fill water tank (10) with clean water and run one brewing cycle to rinse the coffee maker.
• Change the charcoal filter (17) (ill. k). Reinsert the charcoal filter to the coffee maker (ill. l).
NOTE: You can use the cleaning function before reaching 60 cycles (especially if the water hardness is above normal). Press and hold clean indicator/button (22) for 3 seconds.
NOTE: The Cleaning Process takes 60 minutes to complete. You cannot cancel the cleaning process before it is complete. Unplugging the machine only delays the cleaning process.

Jan 26, 2009 | GE 106591 Coffee Maker

1 Answer

Miele CVA 4070 coffee system


I called Miele hot line & here is the solution to fixed the problem... 800-999-1360.

http://www.miele.com/

Whenyou start the cleaning cycle, Don't stop the process by pulling the plug! Turnthe unit off from inside wait 5+ seconds & turn back on and thecleaning cycle should restart... If you do not use a cleaning TAB..Open& shut the LOOSE coffee Door under the drawer (Top Left) and thecycle will continue.

Aug 25, 2008 | Miele CVA4070 Coffee Maker

Not finding what you are looking for?
Miele CVA2660 Stainless Steel Coffee Maker Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Coffee Makers & Espresso Machines Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Miele Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...