Question about Microsoft Windows XP Professional
NO problem about that, so go ahead and continue using that and make sure you do a full scan on your computer,,
Contact me back for further help if you still need help.........
Posted on Nov 02, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Mar 22, 2011 | Computers & Internet
Mar 18, 2011 | Zanussi Washing Machines
If the symptom didn't cure by convergence adjustment through the remote control, this is an indication of faulty convergence board inside. You may replace the convergence IC's and some of the resistor around because its already gone bad. You may also replace the entire convergence board for your convenient. If the board replaced with new one, your unit will back to normal again. Also, consider bad solder joints in that area, it will do the same symptom like what you've encountered right now. Find it first and re-solder. If you don't have necessary tools and test instrument and can't do the job yourself, I would advise you to look for a qualified technician to isolate the problem.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.
Mar 15, 2011 | Toshiba Televison & Video
May 14, 2010 | Campbell Hausfeld High Pressure Soap...
Dec 21, 2009 | Amana ABB1927DE Bottom Freezer...
Nov 04, 2008 | Microsoft Windows XP Professional
Nov 02, 2008 | Microsoft Windows XP Professional
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: