Question about RCA DISH Network(r) 311 Satellite System

1 Answer

Vs ultra has no video or sound the chan come up you can read what show and how much time is left sat strengthbut continuously read auto roll

What do i do

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

I number of things could cause this but most likely its due to signal strenth.

Posted on Nov 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The sound ok but no video


What kind of TV? Did it ever work? What channel does it show? How is the Fortec connected to the TV?

Dec 12, 2013 | Fortec Star Lifetime ULTRA

1 Answer

TV has screen saver that says Press "Select" to Continue but when i press select nothing happens and the remote functions fine otherwise. The DISH receiver model is 322


It sounds like the remote lost its function, you need to program it again, try this. Please press SAT at the top left of your remote for 5 seconds and then press RECORD three times. IF that does not work, access the system info from the TV1, location, readress that remote.

To readress that remote, try this. With the remote that is not working, please press and hold the SAT button. Once all the buttons light up, let go, and then press 9, then # (below 9). Press RECORD twice. Did the Remote Address change on the system info screen? If so, you are set!

http://tech.dishnetwork.com/departmental_content/TechPortal/index.shtml

Jan 16, 2010 | DISH Network 322 DTV Receiver

1 Answer

The receiver is not reading control remote No.2. the control works, but the receiver does not respond to it. Could it be the antena?


It could be the distance the remote is from the antenna. Try going to the receiver and pressing the guide button on said remote. Go back to TV 2 and see if it is up. If not go back to tv 1 and with TV1 ON AND TV1 REMOTE IN HAND press MENU-MENU. You will be able to see the remote addreses for the remotes toward the bottom of the page. With TV2 remote in hand press and hold the SAT button in the upper left of the remote until all buttons across the top illuminate. Now press in a trwo digit number between 2 and 15. Press the pound sign and the SAT button will flash thrice. Now press record a few times until you see the TV2 icon on the screen blink and the address is the same as you keyed. Exit out of the menu with TV1 remote. Go to tv 2 and try. You should be good to go.
Thanks for using Fix Ya.

Dec 14, 2009 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Our Dish 322 DVR repeatedly freezes in the middle of a show. The video stops but the audio continues. If I switch to another channel, the screen is black. This has happened with "live" TV and with recorded...


You must be talking about the 522 DVR. If so then there could be issues with your hard drive or a cableing issue. be sure to connect all sat in connections and if you conitune to have this issue call 1-800-333-3474 for tech support as your issue could take extensive troubleshooting. More than likely your will get a replacement DVR and if you still have the same issue then a tech will need to come out to check cableing, ground and lnb's on your dish.

Nov 26, 2009 | DISH Network 322 DTV Receiver

1 Answer

When i turn on the tv it goes to a Dish Screen when i push select it doesnt do anything


I most likely need additional information to ensure this is in fact the correct resolution to your remote issue- but it sounds as though the remote may be in tv mode. If this is in fact the problem, then the remote simply needs to be put into "SAT" mode, which will enable you to be able to press select to proceed past the DISH Network screen. The "SAT" button is labeled & in the upper left hand corner of the remote just press SAT once and then release, the button should briefly light up red & then will go off, you can then press select and as long as the SAT button lights up when you press select or any other button on the remote then your all set to go! I hope this helps -please let me know if there is anything else I can help you with! -Kirstie DISH Network

Sep 29, 2009 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

Dish 625 DVR recorder won't play recorded shows. It gives me an error code (05)


Hi I will be more than glad to assist you in this concern. First press the power button on the front panel of the receiver for 10secs. once you press it the receiver will turn off and it should turn on by itself, once it turns on by itself you will see attention 015, press the menu button on the upper left of the remote, once you see the menu button press 6, 1, 1 on the remote and it should show on the screen point dish, select on check switch, once u are on the installation summary screen, select on test and it should do a test of 1 of 3 or it depends on your sat orbital location that u have.. once its done, it will show the installation summary screen and you should see sat input 1 & 2 with port1 up to 2 or 3 depends on your sat orbital location, all the trans on the sat 119, 110 or 129 if you have should be ok and green. once you see that all ok, select done on the screen, and it will be back to point dish, select done again, and then cancel all the way out of the menu, it should show on the screen attention 015, let it finish until it download the programming guide, once its done it should show a tv pic. press the dvr button and access your recorded event, it should play the dvr event. if the problem still exist, unplug the power of the dvr from the power outlet for 1 minunte then plug it back again and it should acquire the sat signal and download the programming guide, once it shows a pic. press again the dvr button and access the recorded event. it should play the recorded event, just incase the problem still exist, check what will be the exact error msg, write it down in a piece of paper and please feel free to get in touch or you can call on 1-800-333-3474..in order to for the dish tech support replace the receiver, this is a dvr lost of function.

Sep 05, 2009 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Does not receive 110 side


Hi a_mizrahi! I will be more than glad to assist you in thhis concern. If your model 510 dvr receiver dont get the sat 110. Lets check 1st the cable connection on the back of the receiver, make sure that the cable connected on sat in is connected hand tight and check as well if the cable is going to the wall with a connector as well. Then press the menu button on the upper left of the remote, it will pop up the main menu, once you got it, press number 6-system setup, 1 installation, 3 system info, It will show the system info one. check on the field letter g, you will see sat number, ex only 119, bcoz you cant get 110, check if sat 119 is green on the buttom box, if its green then select cancel on the screen, then select 1 pointdish, select on check switch then once you are on the install summary, select test on the buttom portionof the screen. It will run a test it could be 1 of 2 or depends on the situation of your sat dish.. wait till it finish. once its finish, it will show the install summary, check if you have, input1-119-all- device name, input2-110-all-device name, or it could show this way, input1-119-odd-even, input2-110-odd-even, if you got 110 on the input after the test it means that we are almost there to fix the problem.. select cancel on the screen, cancel all the way out of the menu until it will pop up attention 015, it should show a progress up to 5 of 5 then it will download the programming guide, wait until it finish the download and it will pop up a picture right away on the tv. let check if the 110 is ok, most of the channels broadcast under 110 is your local channels and some upper channels from the sat.. press menu and then main menu willshow, press 6, 1, 3, back to system info one, check on the field g if sat 119-green, 110-green, if there is no 110 showed on the field g, cancel alll the way out of the menu, then press the power button on the front panel of the receiver for 10secs to reset the system, it should show on the front panel of the box that the power light will turn off and turn back on by itself, then it will acquire the sat signal again, it will go to the process of finishing the progress and download the program guide again, just incase the front panel reset didnt work, do the hard reset by unplugging the power of the receiver to the wall outlet for 1minute. then plug it back in, it will go to the progress again and download the programming guide.. check again the sat on the system info one, by pressing the menu button on the remote, press 6,1,3, check sat 110 is there and 119, it should be green on the button. granting still no 110 sat, select cancel, then select on the screen updates - option 4 I think, once your there, check if without my permission is selected or check, then save , cancel all the way out of the menu, once you got a picture, press the power button on the remote to turn off the receiver, leave the tv on, wait for a few secs and it will pop up attention 061, downloading vital program information, this msg will appear if your software version is outdated.. wait until it finish and once its finish the tv screen will turn black or snowy screen and no lights on the front panel of the box. push the power button on the front panel of the receiver for 10secs to reset the box and wait till it acquire the sat signal and download the programming guide, this should fix the problem, if there is no changes, please call dish network tech support @ 1-800-333-DISH, to check your sat system, there is a possibility that there is a problem on the alignment of the dish, switch or lnbf..

Sep 02, 2009 | DISH Network DVR 510 DTV Receiver /...

1 Answer

Vs 2000 ultra wont boot


Check this link for some useful info on how to fix your receiver.
Good Luck.

Mar 17, 2008 | RCA DISH Network(r) 311 Satellite System

3 Answers

Please get me started with Fortec Star Lifetime ULTRA


There are plenty of information on how to do this conversion.
Google it or you can go to www.dssrookie.com for more info on how is done.
Good Luck.

Feb 15, 2008 | Fortec Star Lifetime ULTRA

Not finding what you are looking for?
TV Receivers & DVRs Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA TV Receivers & DVRs Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike Nick

Level 1 Expert

3 Answers

Tony

Level 3 Expert

2598 Answers

Are you a RCA TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...