Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool Duet GHW9100LW2 Washer

Purchased a Whirlpool Duet GHW9100LW2 front loading washer in 2004....10/26/2008...it wouldn't spin...my husband took it apart to find the yoke that attaches the drum to the back had corroded, cracked, and broken...I called Whirlpool, thinking it shold be covered...was pretty much told tough luck...we paid over $1,000.00 for this machine...would have liked to have gotten a few more years out of it...anyone else with this issue??? If so any luck with repairs??? I have pictures...
larasmussen@bellsouth.net

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 8 Answers

Please check out my post at:
http://www.fixya.com/support/t1254687-duet_washer_very_loud_when_spinning
and let me know if yours looked similar.
Thanks,
Bill

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water goes into the washer even when the washer is off


Yes , the valve is stuck. take top cover off to get to it by removing 3 or 4 screws from top rear and replace.
Phil

Apr 14, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a front loader whirlpool duet #ghw9100lw2


The filter on your pump is probably clogged with lint and stuff. You have to remove the bottom front panel, 3 torx screws underneath. The panel will drop and come off. Drain off the excess water from the drain pipe you see. The white filter cover is right in front. Get yourself a good plastic bag to collect water. Unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in carefully. Check your pump too, comes after the filter.

Apr 08, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Vibrating Whirlpool ghw9100lw2


At Lowes you can purchase foam rubber pads 4"X5" pack of two for $3.50. If walking forward and after cecking level and washer pads are tight, place half of one pad under each of the two front feet. Place the sticky side against washer feet. Solved my problem.

Feb 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front load washer, Clicking noise during spin cycle


i would open the door nad with your hand (glove on if preferred), feel around the intereior of drom for prhaps a nails, or hair clip that has gotten caught in one of the many holes in tub

Dec 21, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Squeeking noise on whirlpool washer duet ghw9100lw2


replace your belt in back easy.every year if still has smell buy warranty your rear bearing is going bad."less soap plz"

Nov 13, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer model number GHW9100LW2,SER# CSR2021497


Central Control Board part 8182221. You can go online repairclinic.com to order parts.
Good luck

Jun 27, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

1,013 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...