Question about Minka Aire F602-BNCH Gyro? Fan

1 Answer

Minka aire f602

We just got a used f602 minka aire gyro fan. it has great air from the fans but the two remote controls are not talking to the will not spin as it should is there a way to download the manual for this fan? we would gladly pay for the download. thanks verla

Posted by on

  • Anonymous Apr 05, 2009

    no manual, need to pair the wc212 wall switch with green receiver in fan, have 4 in home, they cross talk. Note 8 dip switches in wall switch only. none in receiver.

  • jeffrey vargo Dec 01, 2012

    you will find the dip switches under the the base....thats where mine were....when my kidds played with the remote and had to see what position the swtches were in. but you need turn power on to the fan then press the on/offbutton in the remote..then press again holding the button down till you see the light on the fan flash...then they will comunicte


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

There are tiny dip switches on the remote as well as on the receiver. Make sure they are set to the same sequence. The receiver is the black box that all the wires connect to in the ceiling.

Posted on Jun 11, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I purchased a Universal Wall Mount Control to operate a current wireless controlled fan with a hand held remote. Why is the wall mount control not operating fan with fans original receiver?

Depending on the age and brand of the fan it could have dip switches on the receiver, the part of the remote control unit that is either up in the canopy of the fan or it may be built into the fan, and the wall control ie transmitter may not be compatible with it. When replacing a remote control unit it is advisable to replace both since it could be either the receiver or transmitter.

Jan 03, 2017 | Dryers

1 Answer

I have an airworks pedestal fan model pdfjy16a and I have lost the remote. Not that I need an original remote, but is there a universal remote for pedestal fans?

there are phone apps for remote controlling almost anything try one of those see if it can find your remote frequency for the fan good luck

Dec 31, 2016 | Dryers

1 Answer


Of course, depends on your model - the board can run from $50 to $300 depending on furnace model and if one or variable speed fan (if forced air) - plus about $125-200 labor depending on model

Jan 19, 2016 | Dryers

1 Answer

The heat on our tumble dryer does not appear to work but I am not sure how to detect if we are doing something wrong?

Hello Colin;

My name is Peter. I am a retired field service appliance technician.

There are many different dryers with different electrical components.

You may have a hot air circulation problem. This is common where lint will block the air flow. You have a hot air distribution manifold, remove the manifold. At the smaller bottom is where the fan wheel discharges, this is where dryers usually plug up. The manifold is located where the hot air fan discharges air. Also, check the fan to make sure it is not plugged up and turns freely.

Needless to say unplug your unit first.

It could be a bad thermostat, and several other things.

If your unit is not plugged up with lint, please post again and provide a model number so I can see what you have

Nov 24, 2014 | Dryers

1 Answer

_don@hotmail.comthe heat control function doesn't seem to be working, the clothes get very hot regardless of setting. which device controls the temperature? Thanks for your help. Don

Hi ngentry don...
Your overheating problem is not caused by the thermostats...
Do the following:

Check and clean if necessary your vent hose.
If you vent hose "seems" to be clean then,try running the dryer with the vent hose off and see if the dryer is not running hot anymore.
Make sure your lint screen is in place and has no tears or holes in it and is still firmly attached to the frame.
If you are running too hot you are not moving enough air thru the system.
It could be that the fan blade is plugged up.
The problem could be a large lint ball build up in the center of the fan or a sock,thin pants,a pen,etc. that has gotten into the fan by falling down the hole where the lint screen is normally inserted.
You have to find the air restriction to solve the problem.
It also can be a loose or worn out blower wheel/fan.
Please take time to rate me.

Sep 05, 2011 | Dryers

1 Answer

The dryer hose fills with water, the lint trap never catches anything and the roof of the dryer gets hot but the clothes wont get dry. Any ideas? Thx

It sounds like you have no fan blowing. OR the vent is completely blocked so no air flow.

You could check fan by disconnecting the vent hose in back, and turn dryer on. Is is blowing a good volume of air? If so then you need to look at the vent. Any critter build a home in there? etc..

If there is no significant air blowing from the vent, you'll need to figure out why the fan is not blowing.
It's possible the fan is turning but is choked up and unable to move the air.
Perhaps the fan is bad, or there is a capacitor gone bad,.
That's as far as I can go from here.
Others may assist you further..

Dec 04, 2010 | Estate TEDS840JQ Electric Dryer

1 Answer

Ge Profile Electric dryer model DPSE810EG5WT The


If the fan does not work at all,then the fan motor must be replaced. The fan is tested jumping its contacts to energize it directly.

More commonly the problem is clogged air ducts. Check lint filter and check ducts for blockage. Ensure that the air duct is well in place.

Jun 27, 2010 | Dryers

1 Answer

My 400 series kenmore Not heating only work with fans cold air.

unplug,remove back,check the fuse on the heater box located on the left upper side on the heater box,use your meter and ohm it out

Mar 20, 2010 | Kenmore Dryers

1 Answer

My dryer is tumbling but not blowing air hot nor cold

then you would have a broken fan blade.

because the motor that turns the drum is also the motor that turns the fan blade to blow the air.

open the rear portion of the dryer and you can find the fan blade, made of plastic, being covered by the vertical duct that came from the drum. then the outlet of the fan assembly goes out to the exhaust of the dryer.

another could be problem would be a clogged exhaust duct. check the exhaust duct or the hoce that is attached to it. see to it that it is clean and no blockade.

tnx 4 using fixya,


Sep 30, 2008 | Dryers

1 Answer

Ceiling fan replacement parts

Here is the link for SOME parts for Minka Aire Fans. They don't necassarily need the model number, just the balde dimensions for replacement. Hope this helps you.

Mar 23, 2008 | Dryers

Not finding what you are looking for?
Minka Aire F602-BNCH Gyro? Fan Logo

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minka Dryers Experts

 brad Wolff
brad Wolff

Level 1 Expert

7 Answers

Fan Fair Of Boca
Fan Fair Of Boca

Level 3 Expert

1617 Answers

The Knight
The Knight

Level 3 Expert

69814 Answers

Are you a Minka Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides