Question about Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Canon MP210 with Mac OS X 10.4.11 problems with printing docs

I have installed my new Canon MP210 onto my Mac OS X 10.4.11.
I can scan and then print the image but I cannot print a word or excel doc, the printer just fires blank pages through.
Also I cannot access the utility icon when opening 'printer setup utility' as it remains greyed out.
Any thoughts welcome............

Posted by on

  • 3 more comments 
  • Landara Nov 04, 2008

    Just purchased the printer today and after hours of downloading and unloading and downloading the software.....finally got the computer to recognize the printer......but, like you, am only getting blank pages coming through when I try to print from my mac. It will scan & copy, but will not print.....have you found a solution????
    would appreciate any help you can give.


  • marke67 Nov 23, 2008

    I have same problem - having just uploaded leopard, the printer will photo copy a document but only fire blank pages through if printing any document from the pc. have just acquired 4 ink packs so a little annoyed to say the least

  • Anonymous Nov 23, 2008

    hello. i have the same problem. help, damn it.

  • hayesphillip Nov 29, 2008

    Same problem. Got this damned printer. Won't print nothin but blank pages. WTF.

  • Anonymous Feb 19, 2009

    pages document, or word document, comes up correct on preview but simply feeds through blank pages when sending to the printer

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi

I have OS-X 10.4.11 and had the same issue; any printing just spat out blank pages.

I installed the following driver which completely resolved the issue:

http://software.canon-europe.com/software/0029270.asp?model=

There's a similar one for 10.5 that I haven't tested, to be found here:

http://software.canon-europe.com/software/0028432.asp?model=

If you use 10.5 and this driver works for you, please let others know by posting here, too.

Good Luck

Draqul


Posted on Dec 22, 2008

  • audmaud Mar 01, 2011

    This worked beautifully - thank you!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've been scanning to my computer w/ my cannon mp240 and suddenly cannot. It still scans and prints and prints from my computer, but the scanning to computer has stopped. I have a MAC and it's worked...


The printer drivers for the MP240 are intergrated in the Mac OS X.
If software for your printer was included with the Mac OS X installation, check the printer manufacturer's website for updated versions. Install a printer driver available from the manufacturer's website only if it is a newer version than the one included with Mac OS X.

Repair disk permissions

Tip
: For more information about Repair Disk Permissions and Mac OS X v10.2, v10.3 or later, see "About Disk Utility's Repair Disk Permissions feature".
  • Mac OS X v10.3 or later: Open Disk Utility (/Applications/Utilities/). Select your Mac OS X startup volume in the column to the left of the Disk Utility window, then click the Repair Disk Permissions button.
  • Mac OS X v10.2 through 10.2.8: Open Disk Utility (/Applications/Utilities/). Select your Mac OS X startup volume in the column to the left of the Disk Utility window, then click the First Aid tab. Click the Repair Disk Permissions button.
  • Mac OS X v10.1.5: Update to Mac OS X 10.1.5 if you have not already, then use the Repair Privileges Utility. See "Mac OS X: About the Repair Privileges Utility 1.1".


Reset printing system (Mac OS X v10.4 and later)
If other steps haven't helped, you can reset the printing system. Important: This should only be used as a "last resort" when troubleshooting a printing issue.

Dec 17, 2010 | Canon Office Equipment & Supplies

Tip

Canon pixma mp210 Drivers for Windows and MAC OS


Here I will show you where to find drivers and manuals for the Canon Pixma Mp210 photo all in one printer.

Drivers for this printer are available for Windows 98, windows ME, windows Xp, Windows Vista, windows vista 64bit editions, windows 7 and windows 7 64bit editions.

On the Mac side drivers are available for Mac OS X 10.2/10.3/10.4/10.5/10.6

A full on screen manual, quick start guide and other instructions are also available.

To download these drivers and or documentation for your printer please visit
THIS PAGE

Note that the picture says MP190, but the actual page linked will be for MP210. 6632e12.jpg

1. Click on Drivers & downloads

2. Select your OS ( Operating system, windows, mac etc )

3. All available drivers, documents etc will be available below.
For some of the documents a PDF reader may be required to open and read / print them.

To obtain a PDF reader, read this page
PDF Documents. Pdf reader(s)

Thank you for reading and I hope your printer is up and running again.
-Ekse

on Mar 11, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

When i download the canon driver for the MF 4010 onto my MAC it downloads and lets me install the printer but when i come to print it comes up that the printer driver cannot connect! Any ideas?


You didn't specify the OS you're using so here are a couple of tutorials for Mac and Canon printers.


https://engineering.purdue.edu/ECN/Support/KB/Docs/MacOSX10.4AddingPrinter

http://hints.macworld.com/article.php?story=20090825110938102

Hope they help

Nov 04, 2010 | Office Equipment & Supplies

1 Answer

MP 210 printer maintance is in progress code 21140


Try refilling them. If they are empty, there is no way you will be able to print anything (or scan, or copy).

Mar 01, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Double Sided printing of PDF files


you have to set the printer properties to do double sided printting

Sep 11, 2009 | Canon ImageCLASS MF4350d Laser All-in-One ...

1 Answer

Scanning


Not sure what is your OS using for this printing but you must make sure your driver use suit the OS otheriwise it may not work. To get details about driver you may find below link useful..
http://etech.maiila.com/canon-pixma-mp210-photo-all-in-one-printer-driver-manual-and-software

Good Luck

Nov 02, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Canon Pixma MP210- cannon install


your canon mp210 came with 2 hardrive discs try both. If this still did not work go on to the canon website and find your model of your printer then go on drivers and downloads. find your OS

i hope this helped

Oct 25, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Brand new Canon MP210 wont print at all


Try going into Control Panel, Administrative Tools, Services and make sure that the print spooler is set to automatic.

Also make sure you have the latest drivers.

Click Here To Go To Canon Support

Sep 08, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

1,158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1818 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...