Question about Mitsubishi CS-40505 TV

Open Question

Mitsubishi tv model#cs-40505 will not turn on

Mitsubishi tv model #cs-40505 will not turn on

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: How do you unlock a mitsubishi tv CS- 40505

i have a mitsubishi and a phillips universal remote , someone locked my tv don't know password

Posted on Nov 27, 2009

  • 8457 Answers

SOURCE: Can't set sleep timer on my mitsubishi cs-40505

U can't do it without the original remote.Go in the tv menu by the manual button control might could set the sleep timer.This is a extra option on most tvs.

Posted on Jun 07, 2010

gopakumarg43
  • 68229 Answers

SOURCE: i need to program my remote, it is a ge universal

Hello

Three digit universal remote codes for Mitsubihsi are:-

004/ 005/ 009/ 022/ 046/ 081/ 089/ 132/ 133/ 180

Four digit universal remote code for Mitsubishi are:-

0005 0151 0051 0004 0009 0254 0022 0141 0180

Switch OFF and ON your TV with its front panel power switch, [NOT BY THE REMOTE HANSET] before trying each code

Proceedings

Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Posted on Dec 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Schematics cs 40505


Alas, your great TV has had a power supply failure.

Mar 10, 2014 | Mitsubishi Standard (CRT) Televisions

1 Answer

I have a Mitsubishi cs-40505 tv. It will not turn on. A clicking noise is heard after pushing the power button then again a few seconds later. Tv does eventually turn on after pressing power bu.tton...


The fault is with its main board. Contact any service technician, or the authorized service center for Mitsubishi. I can't predict about how much you have to spend. It will depend upon the fault, and the sost of component/s have to be replaced.
Anyway, be sure, this is not an easy work, for a user to do.
Gopakumar Gopalan Google

Feb 26, 2014 | Mitsubishi CS-40505 TV

1 Answer

Mitsubishi tv 32 inch model number cs40505 won't turn on


Check its power regulator board. Check fuse. replace it as card basis, if found irrepairable.

Jun 14, 2012 | Mitsubishi CS-40505 TV

1 Answer

Need power cord for mitsubshi cs-40505


Hello
Just select a good quality power cord for your Mitsubishi. The power cord may look like this. Select a high quality one. that is all.
4_2_2012_1_10_54_pm.jpg

Apr 02, 2012 | Mitsubishi CS-40505 TV

1 Answer

I need to program my remote, it is a ge universal and my mitsubishi is model cs-40505


Hello

Three digit universal remote codes for Mitsubihsi are:-

004/ 005/ 009/ 022/ 046/ 081/ 089/ 132/ 133/ 180

Four digit universal remote code for Mitsubishi are:-

0005 0151 0051 0004 0009 0254 0022 0141 0180

Switch OFF and ON your TV with its front panel power switch, [NOT BY THE REMOTE HANSET] before trying each code

Proceedings

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Dec 19, 2010 | Mitsubishi CS-40505 TV

1 Answer

Can't set sleep timer on my mitsubishi cs-40505 tv. I do not have the original remote. How can I set the sleep timer?


U can't do it without the original remote.Go in the tv menu by the manual button control might could set the sleep timer.This is a extra option on most tvs.

Jun 07, 2010 | Mitsubishi CS-40505 TV

1 Answer

How do you unlock a mitsubishi tv CS- 40505 without the original remote?


i have a mitsubishi and a phillips universal remote , someone locked my tv don't know password

Oct 22, 2009 | Mitsubishi CS-40505 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Mitsubishi Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...