Question about Dryers

1 Answer

Kenmore 600 Series gas dryer

Used dryer last night and it worked fine. This morning did another load of wash, placed in dryer, pushed switch and nothing happened. Light inside dryer is on but when I close the door and push the start button, nothing happens.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Trigger broken dryer will not turn on. I need a replacement. Where can I buy this part.

Posted on Mar 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore 90 series dryer, it was working fine last night but this morning it was only blowing cold air. I checked the dryer vent and checked the heating element and there are no broken coils. What...


check the thermal fuse on the blower housing,if its ok then some units have a heater relay located behind the control panel thats controlled by the moisture sensor board its in the center of the panel but without a model number i cant be sure if this one has it

Jul 17, 2012 | Kenmore Dryers

1 Answer

Kenmore 600 series dryer won't start. Interior light comes on


Strong possibility your dryer fuse has melted due to a lint buildup in the filter chute of your dryer. Check out my photos of a dryer tuneup I did last summer. ROPER DRYER TUNE UP

SERVICE MANUAL AND MORE PHOTOS

Jun 16, 2012 | Dryers

1 Answer

Kenmore electric dryer, 600 series, runs but does not heat.


check you're thermostats for continuity, they are normally 3 thermostats, reset stats have a button on them please press, if not thermostat its your heating element

Jun 20, 2009 | Dryers

1 Answer

How to remove front panel from kenmore 90 series gas dryer


Gently pry top of dryer in front corner area. Disconnect door switch inside front. Remove 2 sheet metal screws from inside front. Let me know, Thanks, Sea Breeze

Mar 21, 2009 | Kenmore Dryers

2 Answers

Location of the thermal fuse on the kenmore gas dryer 80


It is mounted on the rear of the dryer on the blower housing. f8cdc70.jpg

Feb 03, 2009 | Dryers

1 Answer

Kenmore 90 Series Electric Dryer will not run


chech to see if your belt is broken. It may have a belt switch

Oct 28, 2008 | Kenmore 62602 Electric Dryer

1 Answer

Kenmore 80 Series Heavy Duty Dryer won't work


hi thanks for the question the belt has probably broken there should be a bottom panel use screw driver to pry the front on each side pry outwards remove panel now you should see a broken belt replace thanks the appliance dod

Sep 25, 2008 | Kenmore 63942 Dryer

1 Answer

80 series front load dryer will not turn.


It almost has to be the belt as the heating element won't come on without the motor turning.

Jun 26, 2008 | Kenmore 62802 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...