Question about HP Pavilion DV5234US Notebook Laptop

2 Answers

My apple ipod nano doesn't start!!!!!!!!

I have this problem with my apple ipod nano.whenever i try to start it manually.it doesnt and when i connect it to the computer it just displays go to apple.com technical support............n when i remove it from the pc..again the display doesnt appear.

someone told me that battery of apple ipods cant be replaced once they r empty or get damaged.is it true?

i got my ipod in july 2006.
what do i do????????????

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

Hi There, You are indeed having a battery problem. The battery needs to be replace. The someone who told you that the battery cannot be replace is wrong ;-) Did you purchase the extended warranty from Apple? If so, they will be able to replace the battery free of charge. If you did not purchase the extended warranty, then you can purchase the battery from ebay and replace the battery yourself if you are a "do it yourself handy person". If not, you can send the iPod in to a third party to replace the battery. I found the below site for you that will sell you the battery or they can replace it for you as well. http://www.ipodjuice.com/apple-ipod-repair.htm If you need additional help, please feel free to contact me. Thanks, Mike

Posted on Nov 02, 2008

  • Mike H. Nov 14, 2008

    What was so inappropriate about my response?

    I gave you positive advise and did the research for you as well.
    Ungreatfull piece of Sh*t you are.

    By the way, have a wonderful day.

    Mike


×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My apple i pod doesn't connet with computer for charging

Posted on Feb 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The problem is, i want to put music from my laptop onto my apple ipod 4GB a1051, how do i do that please?


The following information has come directly from the apple support web site.

Adding Content Automatically or Manually
There are two ways to add content to iPod nano: ? Automatic syncing: When you connect iPod nano to your computer, iPod nano is automatically updated to match the items in your iTunes library. You can sync all your songs, playlists, videos, and podcasts, or, if your entire iTunes library doesn’t fit on iPod nano, you can sync only selected items. You can sync iPod nano automatically with only one computer at a time. ? Manually managing iPod nano: When you connect iPod nano, you can drag items individually to iPod nano and delete them individually from iPod nano. You can add songs from more than one computer without erasing songs from iPod nano. When you manage music yourself, you must always eject iPod nano from iTunes before you disconnect it.

The following URL will bring you to the iPod Nano manual. For more information on setting up you iPod see chapter 2: Setting up iPod Nano

http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf

I hope that information above has helped is some way.
If possible please rate this solution.

Sep 02, 2010 | Apple iPod nano

1 Answer

I cannot install music from my computor to my Ipod 4 nano


If you can't connect iPod nano to your computer , make sure;
  • you have installed the latest iTunes software from www.apple.com/ipod/start.
  • Try connecting to a different USB port on your computer. Note: A USB 2.0 port is recommended to connect iPod nano. USB 1.1 is significantly slower than USB 2.0. If you have a Windows PC that doesn’t have a USB 2.0 port, in some cases you can purchase and install a USB 2.0 card. For more information, go to www.apple.com/ipod.
  • iPod nano might need to be reset (see page 64).
  • If you’re connecting iPod nano to a portable or laptop computer using the iPod Dock Connector to USB 2.0 Cable, connect the computer to a power outlet before connecting iPod nano.
  • Make sure you have the required computer and software. See “If you want to double check the system requirements” on page 68.
  • Check the cable connections. Unplug the cable at both ends and make sure no foreign objects are in the USB ports. Then plug the cable back in securely. Make sure the connectors on the cables are oriented correctly. They can be inserted only one way.
  • Try restarting your computer.

Mar 11, 2009 | Apple iPod nano

1 Answer

Ipod nano flashes apple logo and doesnt do anything?


The 5 R's for Apple iPods – www.apple.com/support

These are for Nano, but they apply to all iPods:

Reset, Retry, Restart, Reinstall, Restore

Remember these five basic suggestions if you have a problem with your iPod Nano. If one of the following doesn’t help, read on for solutions to specific problems.

- Reset your iPod Nano. See “General Suggestions,” below.
- Retry with a different USB port if you cannot see iPod Nano in iTunes.
- Restart your computer and make sure you have the latest software updates installed.
- Reinstall iPod and iTunes software from the latest versions on the web.
- Restore your iPod Nano. See “Updating and Restoring iPod Software” on page whatever.

-Tha Mp3 Doctor

Dec 10, 2008 | Apple iPod nano

1 Answer

Apple ipod nano stuck not working nor responding


The 5 R's for Apple iPods – www.apple.com/support

These are for Nano, but they apply to all iPods:

Reset, Retry, Restart, Reinstall, Restore

Remember these five basic suggestions if you have a problem with your iPod Nano. If one of the following doesn’t help, read on for solutions to specific problems.

- Reset your iPod Nano. See “General Suggestions,” below.
- Retry with a different USB port if you cannot see iPod Nano in iTunes.
- Restart your computer and make sure you have the latest software updates installed.
- Reinstall iPod and iTunes software from the latest versions on the web.
- Restore your iPod Nano. See “Updating and Restoring iPod Software” on page whatever.

-Tha Mp3 Doctor

Nov 13, 2008 | Apple iPod nano

2 Answers

Ipod nano


Apple iPod is Locked

There is only one way - and it will erase all your songs (applies to most models, not just Nano):

If you lock your iPod nano screen and can’t unlock it
Normally, if you can connect your iPod nano to the computer it is authorized to work with, your iPod nano automatically unlocks. If the computer authorized to work with your iPod nano is unavailable, you can connect iPod nano to another computer and use iPod Updater to restore your iPod software. See the next section for more information.
If you want to change the screen lock combination and you can’t remember the current combination, you must restore the iPod software, and then set a new combination.
Updating and Restoring iPod Software
You can use iPod Updater to update or restore your iPod software. Apple periodically
updates iPod software to improve performance or add features. It is recommended that
you update your iPod nano to use the latest software. You can also restore the software,
which puts iPod nano back in its original state.
- If you choose to update, the software is updated, but your settings and songs are not
affected.
- If you choose to restore, all data is erased from your iPod nano, including songs, files,
contacts, photos, calendar information, and any other data. All iPod nano settings are
restored to their original state.
To update or restore iPod nano with the latest software:
1 Go to www.apple.com/support/ipod and download the latest iPod Update. The update
has the latest software for all models of iPod.
2 Double-click the software installation file and follow the onscreen instructions to install
the iPod update.
3 Connect iPod nano to your computer and open iTunes. The iPod Updater application
opens.
If you’re using a Windows PC and the iPod Updater application doesn’t open
automatically, you can find the updater by choosing Start > All Programs > iPod.
4 Follow the onscreen instructions to update or restore iPod software.
If you use the iPod Updater application and it doesn’t recognize that iPod nano is
connected to your computer, reset iPod nano (see page 45).
If you want to restore iPod software and you don’t have an Internet connection, you
can use the iPod Updater application that was installed on your computer when you
installed the software from the iPod CD.

-Tha Mp3 Doctor

Nov 10, 2008 | Apple iPod nano

1 Answer

My ipod doesnt powre on


The 5 Rs: Reset, Retry, Restart, Reinstall, Restore
Remember these five basic suggestions if you have a problem with iPod nano. Try
these steps one at a time until your issue is resolved. If one of the following doesn’t
help, read on for solutions to specific problems.
â Reset iPod nano. See “General Suggestions,” below.
â Retry with a different USB port if you cannot see iPod nano in iTunes.
â Restart your computer, and make sure you have the latest software updates
installed.
â Reinstall iTunes software from the latest version on the web.
â Restore iPod nano. See “Updating and Restoring iPod nano Software” on page 50.

Jun 16, 2008 | Apple iPod nano

1 Answer

Ipod nano problems


Go to Start --> control Panel --> System --> Hardware --> Device Manager --> Universal Serial Bus Controllers - see if there is a yellow exclamation mark; if so, right click and select update driver

May 07, 2008 | Apple Ipod Nano Second Gen. Green (4 GB)...

1 Answer

I pod nano 4gb


Start with basic troubleshooting
http://www.apple.com/support/ipod/five_rs/


if it doesnt solve the problem the ipod needs service
https://selfsolve.apple.com/GetWarranty.do

Apr 26, 2008 | Apple iPod nano 3rd Generation

1 Answer

Ipod


If your iPod nano won’t turn on or respond
1) Make sure the Hold switch is off.

2) If that doesn’t work, connect iPod nano to your computer’s USB or FireWire port. Your
iPod nano battery might need to be recharged.

3) If that doesn’t work, your iPod nano might need to be reset.

a) Toggle the Hold switch on and off (set it to Hold, and then turn it off again).
b)Press and hold the Center and Menu buttons for at least 6 seconds, until the Apple logo appears.

4) If that doesn’t work, you might need to restore iPod nano software.

Mar 12, 2008 | Apple iPod nano

Not finding what you are looking for?
HP Pavilion DV5234US Notebook Laptop Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...