Question about Canon PowerShot A85 Digital Camera

1 Answer

All functions work except taking the picture

The camera will power "on". The display screen works, the zoom works, the focus works. The only problem is that it won't actually snap the picture. Memory card is in the camera and isn't full.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers

Bad CCD or CCD circuit board. Try getting a quote for CCD repair or buy another used A85.

Posted on Nov 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuji finepix s3100has no power even with new batteries


I have this problem also with Fuji Z90 model.
Problem is fixed and focus now working ok.
Camera is fall down and after when camera was started giving sound click click from focus big motor and error on screen Focus error
Focus ( lens ) was open ( small cover on top bellow sticker ) Small "snail" gear is taked out . Two sliding segment adjusted for focus ( upper full up and lower full down - beware about spring inside below this focus pins )and snail is inserted back. Camera started and focus start working. I need to make small adjustment . Reason when camera is started picture is not clear and before using camera i need to do full zoom in and back zoom out. After this picture is crystal clear and all working ok.

Dec 17, 2012 | Fuji FinePix S304 Digital Camera

1 Answer

Olympus FE-280 not working properly


the lens could be the problem.. probably need to send to repair before the warranty runs out

Aug 28, 2008 | Olympus FE-280 Digital Camera

2 Answers

LCD Display Blank


I have a sony cybershot DSC-S650, the LCD was very dark and could not see anything except if I pointed it at a bright object, everything else worked ok. I could take pictures but could barely see them in playback as well.

I took it to Sony authorised repair outlet and was told the CCD was damaged, they charged me USD $55 to repair it (in Quito, Ecuador)

Jul 31, 2008 | HP Photosmart R607 Digital Camera

1 Answer

Camedia C-5050 zoom won't take pics


Is your memory full? Does the camera attampt to focus when you push the button down 1/2 way? If not the mode dial may be faulty (you are not in picture taking mode) or the shutter button may be faulty (no focus attempt) Try to use the timer button to get the shutter to trip.

Jul 10, 2008 | Olympus Camedia C-5050 Zoom Digital Camera

2 Answers

The focus on the NIKON COOLPIX P80


some cameras have a choice in menu as to monitor or continous autofocus-monitor or continous means camera always seeks a focus which hurts bat life but makes focus quicker-single means camera won't focus untill button pressed halfway-make sure you are not in macro mode-flower icon on screen-this will screw up focus except for close up work-good luck-check menu settings for your type of focus

May 12, 2008 | Digital Cameras

2 Answers

I can't zoom with my DSC-H1


Check the Sony Support site for this- it may be a free firmware adjustment to down load.
It is not likely an out of warrant camera could be a viable repair option

Feb 10, 2008 | Sony Cyber-Shot DSC-H1 Digital Camera

5 Answers

Zoom Error


try to manually adjust the zoom. My camera is doing the same thing. sometimes I can get it to focus after forcing the camera to zoom in and out a few times. No one well let me know how to get hold of a repair manual to adjust this, but when I figure it out I will post it.

Dec 14, 2007 | Fuji FinePix A345 Digital Camera

2 Answers

Why won't my Cyber-Shot DCS-P31 take pictures?


Actually, try manually turning off the flash and taking a picture. If the shutter works and takes a picture, then suspect that your flash is burned out. Unfortunately it's not a simple task to change a burned out flash tube.

Oct 20, 2007 | Sony Cyber-Shot DSC-P31 Digital Camera

2 Answers

Blury Display on FE140


It sounds like your lens's focus element is stuck. Given the events you describe it is possible that a grain of sand has worked its way into the focus motor's gearing and jammed it up. Normally the small motor moves the focus optic in and out to achieve proper focus, if its movement is limited or completely jammed you will experience blurry pictures. The camera will have to be disassembled and the sand cleaned out to restore normal function. There are repair providers you can find online who can work on your camera. David Millier Advance Camera Repair

Mar 20, 2007 | Olympus FE-140 Digital Camera

1 Answer

Digital zoom not working


Digital zoom is in the menu and must be turned on to activate it. When you use the zoom it takes 2 opperations to function. First opperation is to zoom all the way in then the camera should stop. This is the limit of the optical zoom. Then you let off the zoom button, and hit it again and then the digital zoom will start. Digital zoom is just a gimic if you learn how it works its not doing anything different then you can do in photoshop. All digital zoom is doing is like cropping.

Apr 24, 2006 | Canon PowerShot S400 / IXUS 400 Digital...

Not finding what you are looking for?
Canon PowerShot A85 Digital Camera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...