Question about EliteGroup ECS P4M800-M Socket 478/P4M800/FSB800/A&V&L/M-ATX Motherboard (MOTEC18)
When trying to upgrade memory from 1GB to 2 GB the machine will not boot. I am simply adding exact same DIMM to second slot and it hangs at IRQ screen. Is there an issue with this motherboard not accepting more than 1GB. Is it a BIOS issue?
This board will support up to 2gb as shown below extacted from the website product page.Don't forget that if you have ddr 333 memory installed originally, you can only add the same clock speed memory, i.e. ddr 333. If you add ddr333 and ddr400 you will have problems as the clock speeds do not match. If you are matching clock speeds, the try bootin the system with the new piece of memory on its own to see if there is a problem with that stick, trial an error of both sticks individually, will give a positive result
MEMORY Single-channel DDR memory architecture 2 x 184-pin DDR Upgrade ECS FSB800 memory from 1 GB to 2 GB wont w - ecs_buttom_03.gifrt up to 2 GB Support DDR400/333 DDR SDRAM
Posted on Nov 23, 2008
Tips for a great answer:
Dec 02, 2012 | EliteGroup ECS P4VMM2 Supports Intel...
Apr 27, 2011 | HP MOTHERBOARD FOR PENTIUM MODELS WITH EQ...
Jan 31, 2009 | EliteGroup P4VMM2 Motherboard
Sep 27, 2008 | Foxconn P4M800P7MA-RS2 Motherboard
Aug 19, 2008 | PC Chips MB PCCHIPS M863G V5.1C w/XP2400+...
641 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: