Question about Canon PIXMA MP600 all-In-One InkJet Printer

Open Question

MP600 CD label print

The spcial F tray holding a printable CD-ROm keeps ejecting, stating that there is no CD. I already tried disabling the automatic detection of a CD in the tray in the printerdriver, but this didn.t help

Posted by on

  • pschrors Dec 27, 2008

    The spcial F tray holding a printable CD-ROm keeps ejecting, stating that there is no CD. I already tried disabling the automatic detection of a CD in the tray in the printerdriver, but this didn.t help

×

4 Suggested Answers

IB4G2008
  • 3587 Answers

SOURCE: Printing CDs using the CD tray - now won't work

sometimes those cd label print papers are too thick..and need to fed in one at a time

Posted on Feb 25, 2008

SOURCE: CD printing

Actually, I found a solution - someone suggested saving the CD print file as a PDF and printing from that, and that's helped.

Posted on Aug 23, 2008

  • 1 Answer

SOURCE: Canon MP810-CD-R Tray loading-printing problem

I read on another site that you must wait until prompted on the screen to put the tray into position. Opening the inner door and loading the tray before asked to and then pressing OK was the key to fixing the problem on the MP830. 
It's the simple things that always get you into trouble, I guess.

Posted on Oct 25, 2008

  • 2 Answers

SOURCE: Canon MP810-CD-R Tray loading-printing problem

I am trying to print on DVD with Canon MP810 but the image won't line up - seems to be taking the tray too far in and printing some of the image on the F tray! Help.... it's driving me nuts

Posted on Nov 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i print on a CD?


sorry to inform but you dont print on CD.
You print on paper and then paste it on CD :-)
That's called "label" printing.

Feb 13, 2011 | Epson STYLUS R230 InkJet Photo Printer

2 Answers

Can not print direct to cd dvd


  1. Find a printer that prints directly on a CD; this is becoming a popular feature and these printers are getting more affordable.
  2. Step 2 Buy some printable media. Printable media is a bit harder to find and a bit more expensive but you need a special surface that will absorb the ink. They will be marketed as "inkjet printable" discs. Look for them online or at your electronics store.
  3. Step 3 Set up your printer for CD-R printing. Chances are your printer can print on paper and CDs, so you'll have to let your printer know what you are up to. In your printer properties, select CD or DVD as your media type. You can do this from the print dialog right before you print.
  4. Step 4 Clean the rollers. You can do this by running a clean sheet of paper through the printer without printing anything. Load up several sheets of paper and press the cancel button to feed it through. Do this a couple times.
  5. Step 5 Pull out the tray. This may be a separate part of your printer or built-in. Read the manual and learn how to pull it out properly before you go yanking at random and breaking things.
  6. Step 6 Place the CD in the tray. Make sure there is no dust or paper scraps on the tray and place the CD on the tray so it lies flat and the printable side is facing up. For smaller CDs, place the adapter first and then put the CD down.
  7. Step 7 Insert the CD tray into the printer. If the tray was attached to the printer, put it back where it came from. For separate trays you may need to wait until you are ready to print and load it into the manual feed.
  8. Step 8 Design your label. Your printer will have come with label designing software. Take some time. Make it pretty.
  9. Step 9 Print. Double check your print settings and print directly onto your CD. Choose "File" then "Print" and click "Okay." If you are loading manually, now is the time. Manual loading slots are usually on the back.
  10. Step 10 Allow your CD to dry. It is recommended to let it sit for 24 hours. There is a lot of ink on there and you do not want to ruin it with smudges.

May 10, 2010 | HP Photosmart Premium C309A All-In-One...

1 Answer

Canon MP810-CD-R Tray loading-printing problem


I am trying to print on DVD with Canon MP810 but the image won't line up - seems to be taking the tray too far in and printing some of the image on the F tray! Help.... it's driving me nuts

Jun 02, 2009 | Canon PIXMA MP830 All-In-One InkJet...

2 Answers

CD/DVD Tray open; Close Tray to print


This solution is taken from the HP website.

Follow these steps to print on a CD or DVD.
  1. Make sure that the CD/DVD tray is completely closed (completely inserted into the product).
    NOTE: Make sure that the side of the tray that holds the CD/DVD is inserted into the printer first.
  2. In HP Photosmart Essential, click the Print tab.
  3. Click Printer Settings and then click Advanced to open the printer properties.
  4. In the properties, click the Features tab.
  5. In Paper Type , select Printable CD 120mm .
  6. In Source , select the CD/DVD tray .
  7. Save the settings and then again attempt to print on the CD or DVD.

Feb 05, 2009 | HP Photosmart D5360 InkJet Printer

2 Answers

Canon MP810-CD-R Tray loading-printing problem


I read on another site that you must wait until prompted on the screen to put the tray into position. Opening the inner door and loading the tray before asked to and then pressing OK was the key to fixing the problem on the MP830. 
It's the simple things that always get you into trouble, I guess.

Oct 02, 2008 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Epson stylus r1800 problem with printing on cd/dvd


Try this :

Disconnect the printer from the computer.
Turn it off & make sure the CD/DVD tray is closed then turn it back on.

***

Here's generic instruction for you:

If you are receiving an error pertaining to the CD TRAY NOT BEING INSERTED CORRECTLY, please do the following:

Recommendations:
-Don't force the CD/DVD tray into the printer.
-Make sure your printer is powered on, and the output tray is in the upper position.
-Please ensure there is at least 3 inches of space behind the printer, or the CD tray may eject.

Included, are the correct CD/DVD loading instructions. Please follow the instructions below:

CD/DVD LOADING:
1. Ensure the printer is powered on. Remove any paper from the sheet feeder.
2. Push in the paper support extension on the printer, and close the paper support.
3. Push in the output tray extensions, but leave the tray open.
4. Lift the output tray. Place one hand on the top of the printer, and pull up on the output tray until it stops. Lay the tray down in the upper position.
5. Place the CD or DVD into the CD TRAY with the white (or printable) side facing up. Note: To print on small 8cm CDs, please place the small CD ring on the tray first, then place the CD inside the ring.
6. Slide the tray into the tray guides located in the output tray. Push in the guide until the arrow on the tray matches up to the arrow on the tray guide.
7. Press the PAPER button to load the CD/DVD into the printing position. The CD is correctly loaded when the printer's POWER button stops flashing.

General tips for CD and DVD printing:
-Burn data/video/images onto CDs or DVDs before attempting to print on them.
-Do not use thermal-printable or regular CDs or DVDs in the printer.
-Moisture or fingerprints on the printable surface of the CD may cause marks or smearing to appear after printing.
-All printable inkjet media is different. Some surfaces will absorb ink better than others. If output appears banded, faded, or streaky, print a Nozzle Check pattern to confirm that all colors of ink are printing completely. If the ink does not completely dry or smears after 24 hours curing time, you may need to use the Epson Print CD tools to adjust (lower) the print density.
-The only supported resolution for CD/DVD printing is 1440 dpi (aka "Photo")
-Borderless printing and printing on the "inner circle" (plastic around central hole) of CDs is not supported.
-Do not use the "print preview" feature provided by the Epson printer driver as it will only show the image on a blank field and does not offer a clear indicator of where the image will print.
-The Epson Print CD software works best with JPG images and may not import some TIFF images.

Sep 26, 2008 | Epson Stylus Photo R1800 InkJet Printer

3 Answers

Cd tray error Canon Pixma MP810


Sorry a little late only just read your problem.
The location is not the bottom tray feeder but the disk tray. In settings change your media type to "Printable Disk" the paper scource should automatically change to "Disk Tray" and hopefully every thing will work OK.

May 19, 2008 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Is there any way I can burn an image onto a printable cd/dvd using a burner either through my printer or directly from the burner?


Hello,

1) buy a printer with cd/dvd print tray - like canon 4500, it prints on printable dvd only (printable dvd's have a special white coat to absorb the ink).

2) buy a dvd burner that supports lightscribe like asus drw-1814bl (it prints black only on special coated "lightscribe dvd's"

3) NOT RECOMENDED but also possible, buy cd/dvd labels print on any printer and adhere to cd/dvd, usually over time the glue will destroy cd's and trapped air will make bubbles when the cd/dvd is hot (air expands in hot environment).

Shapirit Computers
050-2330137
www.shapirit.biz

May 04, 2008 | Printers & Copiers

1 Answer

Canon mp 600r dvd printing


IT is easy once you have done it...it works a treat  but you do have to check all the correct boxes. (1) use cd label print that comes with the mp 600 ( i have a 600 not a 600 r)  design the label and then hit print (2) in paper size choose (cd r tray F ) (3) under the paper size box  choose (quality and media) (4) in media type choose ( printable disk recomended) (5) in paper source choose (disk tray) (6) hit print
make sure you have the cd loaded in the disk tray ready with the arrows lined up

good luck

Mar 25, 2008 | Canon PIXMA MP600 all-In-One InkJet...

1 Answer

Printing CDs using the CD tray - now won't work


sometimes those cd label print papers are too thick..and need to fed in one at a time

Feb 25, 2008 | Canon PIXMA iP4200 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA MP600 all-In-One InkJet Printer Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...