Question about Vacuums

1 Answer

The rear wheel on my dyson dc01 has come off. i have been sent the real wheel fastner retaining pack but do not know what to do with the bits. There are two metal rings and two semi circular black rings. Can you help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

There is a small groove in the end of the stud on the vacuum that the wheel fell off of.
Slide the wheel back on the stud, put the washer on then put the ends of the half clip in the grove on the stud pushing on the back of the clip with a small screwdriver on the clip to lock it back in the groove. The old parts may be still in the wheel if it rattles. There should be a plastic cap on the wheel like a little hubcap, pry it off with a screwdriver carefully so you can put it back on after the clip.
Please rate this solution if it helps you.. Thank You....

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reassemble the Dyson DC1 Slim under carriage Assembly


Hi,

This sort of procedure is not something that we at Dyson could recommend. The difficulty also is that there are no longer spares available for the DC01, so any parts that you need will no longer be supplied.

I apologise for any inconvenience that this may cause.

Best wishes,

Allan

Dec 03, 2015 | Dyson Vacuums

1 Answer

One of my back wheels came off . How do I put it back on?


kirby lost a wheel!! - Vacuumland

www.vacuumland.org/cgi-bin/TD/TD-VIEWTHREAD.cgi?13365
Jul 7, 2011 - 6 posts - ‎5 authors My mother has been using in her house three kirbies ( one G5 and two ... I saw this thread and had to do a slight lighten to give an "all about ... to use the extra wide wheelson the front and back (with hubcaps). ... service department he could not figure out why the wheels came off. ... Discuss-o-Vac Forums

Vacuum Cleaner Rear Wheels For Dyson DC01 Models ...


Nov 28, 2015 | Vacuums

1 Answer

Troubleshooting dyson dc01 upright hoover


If you are referring to the bearing cover on the wheel, this appears to be purely cosmetic. The disc is clipped onto the wheel and can easily be replaced IF you have not broken off the latches.

Aug 19, 2014 | Dyson Vacuums

1 Answer

My dc01 wand wont pick up


Hi Davina,

I'm sorry to hear you're having difficulty with your DC01. If your machine doesn't seem to be picking up as well as it should be via the hose, there may be a blockage somewhere in the machine. The filters may also need to be washed or replaced.

To check for any blockages, please follow the steps shown in our online Support guide:

http://www.dyson.co.uk/support/dc01/dc01-standard/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual1/clean-the-shroud
In normal use, the filters should be washed at least once every 3 months, as shown in the video below. Use cold water without detergent, and allow the filters to dry completely somewhere warm for at least 12 hours before replacing them.

This should resolve the issue, but if you'd like any further assistance or advice, please give us a call on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week, and calls are free from UK landlines.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Apr 30, 2012 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

My dc01 upright does not pick up dirt as well as when I first used it (new) after many years of faithful service. I regularly disassemble barrel and wash it and clean turbine head and clean filters. Does...


Hi there,

Sorry to hear of your problem with your DC01. Although it sounds as if you've already checked your machine over quite thoroughly, you might find it helpful to visit the Support section of our website to ensure you've covered everything:

http://www.dyson.co.uk/support/help.asp?article=1919&product=DC01-SY-STD

Unfortunately, we are no longer able to supply spare parts, or carry out service or repairs for DC01 and DC02 machines.

However, as the owner of a DC01, you can receive £100 off selected Dyson Ball™ vacuum cleaners, or £70 off selected other Dyson vacuums. We'll also collect and recycle your old machine.

If you have any questions about this offer or would like to discuss this further, please call 0800 954 0153.

Kind regards,

Jack
Dyson Customer Service

Jul 21, 2011 | Dyson DC08 Hepa Allergy Bagless Canister...

1 Answer

Dyson DC01 Blocked Hose


unclip the hose and push a garden hosepipe throughit. that will clear any blockedge in the dco1 hose.

Jan 07, 2009 | Vacuums

1 Answer

Hepa filter on dyson dc01


Not sure about you model, but some of the dyson's have the hepa filter under the dirt container. Remove the container, there is a cover that comes off and the filter is under that cover.

Apr 20, 2008 | Vacuums

Not finding what you are looking for?
Vacuums Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...