An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 3 tips or uploaded 2 video tips.
An expert whose answer got voted for 20 times.
Re: Window will not reboot after
Try leave the password blank. you know? When we install Windows, it automatically creates an account “Administrator” and sets its password to blank. So try to logon as adminstrator ,here is the guide: Start system and when you See Windows Welcome screen / Login screen, press ctrl+alt+del keys Twice and it’ll show Classic Login box. Now type “Administrator” (without quotes) in Username and leave Password field blank. Now press Enter and you should be able to log in Windows. Now you can reset your account password from “Control Panel -> User Accounts”. Same thing can be done using Safe Mode. In Safe Mode Windows will show this in-built Administrator account in Login screen. if that doesn't work,then just learn from others how to reset windows password with Windows Password Recovery Tool.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It might be installing updates. If it continues to reboot, do a hard reset, or a factory reset. You'll have to type your information in again, but it should stick after a reset. Also, make sure that you are saving your Wi-Fi network information (Such as setting it to automatically connect).
Is the Netgear 95 your wifi router? If it is go to settings/wifi click in the Netgear 95 then click the little "i" on the right for more options. If you have an option to "forget this" click it. Do a hard reboot of your iPad (holding down home and lock button) till it restarts. Once it powers up go back to setting/wifi and try again to connect. That's how I got it to work on my iPhone and iPad when encountering the issue.
If that doesn't work restart your router. Last resort is to change the password but again I've never had to do that. The steps above usually did the trick.
which Password are you talking about? The locked tablet Password or the password to your account? If you are talking about the locked password for your tablet you have to go into settings and then to privacy and then change password.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.
The best way to do this is using the Offline NT Password & Registry editor. You can download it at the following link: http://home.eunet.no/pnordahl/ntpasswd/
This utility will enable you to reset the password of any user
that has a valid (local) account on your Windows NT/2k/XP/Vista
etc system. The link above includes some directions on how to use this utility.