I have WinXP and it works fine. I would make sure you have installed the LX7 SetPoint software so you can adjust these features. Also when using the tilt scroll you have to right click into the window you want to scroll in first. Try those things and then post a reply. Hope that was helpful.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Had the same problem. But before filling the logitech RMA from to get a replacement, I put new batteries into the mouse and the mouse worked again.
I am using rechargeable batteries, and I seems to me even if the green light on the bottom of the mouse is on, the driver warning for low battery does not come on. May be the volage drops to fast with a older set of batteries.
Try out new batteries. Hope this helps.
I am using the LX7 mouse for more than 2 years with lost of abuse (>10x drops from shoulder hight to hard office floor, sitting dongle in my pocket and dropping my backpack onto the floor with the dongle on the botton in the backpack).
You should make sure that you have the LX7 Setpoint software installed to set the features you want. For the scroll button or button three if pressed, I have mine set to zoom (first selection). The scroll function of the wheel should be automatic. Go the mouse movement settings and set the scroll size to 6 lines. That should allow you to scroll your pages adequately. If this helps send a reply for others to view.
You may want to search for the drivers from the manufacturers site if it's offered in the paperwork. If not, I have always found drivers by just typing in the brand, model and manufacturer on a Google search.
I have had problems similar to this B4, it seems that when ya use a Wifi Key board some software "locks out" any other keyboards via the PS/2 interface..
I got a work around by using a USB Adapter and plugged my "Other" keyboard into a USB slot & could then use both, but not some features of it.
So then later, I then got a "Real" USB keyboard and was able to use all the "Features" it had.