Question about GE EasyCam Webcam

1 Answer

Wont work need software please i thought plug n play would work but no thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers
Re: wont work

This should do the trick; Hope this helps :)

Posted on Mar 25, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have the cam plugged into my computer and the green light wont turn on so my cam doesnt work

Hi! i would like to help you with this.

First clue helped me understand that the green light wont turn on, which clearly says that there is no power supply for the webcam.

second thing i would like you to try is.
*please check for loose connectivity issue.
*please check of the port in the computer( where you plug in the cable) or the connector pin is damaged, broken or loose.
*then please check of the driver is installed in the DEVICE MANAGER.

How to get into DEVICE MANGER:
*please click START> RUN.. type in "devmgmt.msc" and click OK.
*then the device manger will open. there you can see drivers for keyboards and all hardware components. please look out for "imaging devices". if you expand it.... you will find the webcam driver.

** if there is any exclamation, question or X mark on it. please let me know. there might be some problem in the driver installation.
** also please let me know the operating system and please check if you installed the webcam software.

please let me know if you need more help. Thank you:)

Oct 23, 2010 | Logitech Quickcam Chat Webcam

1 Answer

Kinamax WCM-NV399 lost cd to night webcam and had to reinstall all my computer software where can i get the software again? ty


This is a plug and play camera.There is no need to download and install any drivers.

If you are talking about the software provided with this camera then you will have to contact the manufacturer directly as there are no downloads available for it on the web.

Thank you for using fixya,.

Nov 16, 2009 | Webcams

1 Answer

Problem with software

Most O/S have a plug and play set up device for any unit attached to Pc. For instance your USB/Extension hard disk could just be plugged and play.
I think this network camera is easy to install and use. I have read about its specification earlier that configuration is automatic and therefore, when you plug it in, it will pop up a window for downloading any files.
Have a nice day. Enjoy

Jun 23, 2009 | Panasonic BL-C1 Network Camera

1 Answer

The seal on the camera says to install software 1st

some devices are plug and play with particular operating nothing to worry.they autodetect and get installed.its normal.continue. please do rate the solution.thanks.

Jun 12, 2009 | Ezonics EZCam III Webcam

1 Answer

Software for Windows Vista


I'm sorry but this old camera is only supported on operating systems, windows 2000 and older, it might work on vista if you just plug it in, if not then it wont.

I'm sorry.

Let me know if you need anything else.


Feb 15, 2009 | Intel CS630 Webcam

1 Answer

PLay wont work

if you have software run it
there should be an option in your video program to set for input and output
when did it stop working

Feb 02, 2009 | Logitech QuickCam Pro 5000 Webcam

1 Answer

EZ-Wizecam lost software.

Hi dude.. You can get the drivers from driveguide. its not free but its not expensive either(They usually charge around 2-3$)

Hope this helps,

Dec 04, 2008 | Ezonics EZCam Webcam

1 Answer

Intel Create & share camera pack

there is a cd with appropriate drivers for xp
but you wont be able to play the kool games like there was on the windaz98 version


Jun 26, 2008 | Webcams

1 Answer

My Cam wont Work

hi sph_allinson this is nichu,
donot worry if you lost the cd
you can download the installation software from internet .
you can download it from this website ,,crid=68,crid2=1764
select the type of your operating system
chose the type of language
then,click on download .
install the same software on your pc & start workin with your webcam.stay cool.

take care & have a nice day.

Sep 08, 2007 | Labtec 961307-0914 Webcam

Not finding what you are looking for?
GE EasyCam Webcam Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Webcams Experts

micky dee

Level 3 Expert

2602 Answers

Teet Bergmann

Level 3 Expert

565 Answers

Cindy Wells

Level 3 Expert

4719 Answers

Are you a GE Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides