Question about HP PSC 1210 All-In-One InkJet Printer

1 Answer

Printing problems Hello, I have an HP PSC 1210 all-in-one. The printer works fine until the ink runs out, so I had it replaced. It says that if the blinking led is solid, it's the black cartridge that is empty. But after I've installed the black, the blinking comes again. This time says it's the tri-color, but it is not yet empty though. How I know? I checked it and there is ink flowing out of it. What do you think is the problem here? The scanner is working, just the cartridges. Do I need to replace both at the same time? Also, will I be able to print with just one of the cartridges installed? Hoping for any help and solutions. Thanks!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

The light will stay on if the cartridge is not inserted correctly, check if it is in correct if you still have the problem remove both cartridges and insert the both of them back the same time. 

Posted on Nov 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

New HP 56 cartridge prints green


hello, are you sure its green, since this is a black in cart, only thing i can think of is machine not printing black , and the color ink cartridge is contaminated, this would be due to the docking area for the cartridge, on the left side of machine, there are 2 black rubber cups that the ink cartridges move over to seal. sometimes these cups have residual ink, which will contaminate the new inks. clean these black cups, and replace inks

Sep 24, 2010 | HP PSC 1210 All-In-One InkJet Printer

2 Answers

HP psc 2110xi color printing problem


The printer head may need to be cleaned. You can buy a cleaning kit for the head.

May 08, 2009 | HP PSC 2110 Color Printer

1 Answer

Check ink cartridge


Your ink cartridges could be dried up or empty, even if they are new.

Jan 20, 2009 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Prints but can't read it


Buy a new ink Cartridge.
Take it out shake it a bit, put it back, if it prints darker for a little bit. You need a new ink cartridge..

Oct 25, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

HP PSC 1210 Printer


just chek ur black catridge is working or not just try to clean it and install

Oct 19, 2008 | HP PSC 1210 All-In-One InkJet Printer

2 Answers

Hp psc 1210 not working in vista - but diagnostic utility shows all ok - and prints test page


Here is the full-write up on the HP PSC1210. Read through this thoroughly to ensure that you follow all the steps to make it work in Vista, since there is no Vista native driver.

Hope this helps - remember to rate :)

Oct 02, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

HP PSC 1210 does not print at all


i dought dust would cause that, reboot pc and unplug printer
plug printer back in then turn computer back on, if still doesnt work try a different usb port

Jan 15, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

PC power resets w/ HP PSC 1210 plugged in


one of these updates causes a conflict more than likely a microsoft hotfix, try using a different usb port and unplug and plug printer back in

Jan 15, 2008 | HP PSC 1210 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1210 All-In-One InkJet Printer Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...