Question about Heating & Cooling

5 Answers

Dyna glo kerosene heater

Wick is smoking badly. Can't find manual on what to do.

Posted by on

  • 2 more comments 
  • Anonymous Nov 19, 2008

    How do I replace the wick?

  • splantz Nov 25, 2008

    need to replace the wick., don't have the manual

  • Terry Moody Jan 03, 2009

    kerosene heater smokes and we have installed the wick properly. We bought 3 and they all smoked. Never had this problem before.

  • Anonymous Jan 24, 2009

    were can I find a new gear assembly for a dyna glo kerosene heater RMC 95 C7

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Smoking problem

Posted on Nov 23, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Heater Shuts Down And Says E2

Posted on Jan 16, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Found a link that may be helpful if you have the dyno-glo heater . You can download a manual for this.

http://www.youheater.com/DH2301-3%owners%20manual.pdf

hope this helps. it helped me.

Posted on Nov 25, 2008

  • splantz Nov 25, 2008

    IF the above link won't work you can go to www.bobvilla.com

    THat's where I found the manual.

×

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Here is the link to Dyna glow manuals...under their parent group name "ghp group"
http://www.ghpgroupinc.com/heaters/manuals.aspx

Posted on Nov 06, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found an equivalent manual for the dyna glow 55r7 here:

http://www.yourheater.com/kerosene.htm

or

http://www.yourheater.com/DH1010-1%20Manual.pdf

Posted on Aug 10, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

samanthaj08
  • 570 Answers

SOURCE: how do you change a wick in a dyna-glo rnc 95-c4?

Make sure to be very careful!

Posted on Jan 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kerosene heater wick


Not recommended. But read your instr. manual if doesnot have
download from www. manualslib.com

God bless you

Oct 01, 2012 | Heating & Cooling

1 Answer

Need to see pictorial instruction on how to replace wick in a Dyna Glo RMC-95-C2 kerosene heater


I think the Dyna-glow RMC95 series of heaters are equivalent to DH2300 series heaters.
In any event, the wick you purchased should have ahd the installation instructions included with the wick.

If it didn't or you tossed it, Here's a link to the DH-2300 series heater's Owners Manual, which may help you.

http://www.yourheater.com/DH2301-3%20owners%20manual.pdf

Good luck. Be sure to wear rubber gloves when you try to install the wick. Particularly, if you still have kerosene in the tank.

Feb 11, 2011 | Dyna-Glo RMC-8001SS Heater

2 Answers

I just replaced the wick, cleaned up the heater and filled with new K-1 kero. The heater (Dyna-Glo RMC-95-C7) is emitting black smoke worst than ever. The wick is burning a little unevenly.


Either the wick was improperly installed or you may not have allowed enough time for the wick to soak in the kerosene and become evenly distributed. Check the placement of the new wick and allow time (several hours) for the wick to absorb the kerosene.

Jan 31, 2011 | Dyna-Glo RMC-8001SS Heater

1 Answer

Need to know how to replace the wick


The first thing you need to determine is the correct model number of your heater. Once you've done that, go to the GHP Group Inc, website listing the heater manuals and locate the appropriate manual for your heater model and click on the link for your heater.

After you've selected the appropriate manual, you can either download it to your computer or print it out. Inside the manual you'll find the instructions on how to replace the wick. The kerosene heater manual I reviewed listed an incorrect phone number to call to order a replacement wick. I suggest you use the new GHP Group's number to order your replacement wick: (877) 447-4768.

If you have a different Dyna-Glo heater than a kerosene one, you should still be able to locate the appropriate manual on the GHP Group's heater website.

Hopefully, you'll have your heater up and working again in no time.

Jan 12, 2011 | Dyna-Glo (PPH16-LP) Utility Heater

1 Answer

Dyno-Glo RMC-95-C7 kerosene heater. replaced wick


once the tank gets low(on E) put the heater outside and let the remaining fuel burn completely out. This will burn off the residue build up on the wick and make it easier to turn off manually. do this often. i also use an old toothbrush to "fluff up" the wick. if the residue is too hard for the toothbrush bristles, flip the toothbrush over and break up the residue with the back side of the toothbrush. once all (or nearly all) of the residue has burned off you may see some smoke when you ignite the wick again. also, it may smell for a bit. I always light and shut off the heater outdoors. I mounted a dolly (table withe 4 wheels) under the heater to make transporting it easier. hope this helps!

Jan 02, 2010 | Dyna-Glo Heating & Cooling

1 Answer

Can not location a source for igniter plugs for my Dyna-Glo RMC 95 kerosene heater


Below is a link to eBay where you can purchase an igniter for you heater:

http://cgi.ebay.com/Kerosene-Heater-Replacement-Wick-Igniter-1183017-NEW_W0QQitemZ390095252633QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item5ad37d2c99

If this helps you, please select YES to the first two ratings questions. Thank you, and Good Luck.

Oct 13, 2009 | Dyna-Glo Heating & Cooling

1 Answer

Kerosene heater


Dyna Glo 95 c4 Manual
http://www.owneriq.com/mdownloads/8979e0af-dfee-45f1-a8ba-c05c2f5ed4a8.pdf

Jan 31, 2009 | Dyna-Glo RMC-8001SS Heater

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

5,483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

2597 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...