Question about Trisonic TS-1666RFS Remote Control

Open Question

Trisonic TS-RC443L remote control

The remote won't turn on the tv when i point it at it.

Posted by on

  • Anonymous Mar 01, 2009

    there is no owners manual with this remote, or instructions. i point and click, but nothing happens.

×

1 Suggested Answer

mir611nr
  • 11 Answers

SOURCE: i need codes.

the codes are.....
136,177 or234 if those dont work do automatic code search...
A: power on the device you want to controll
B:press and hold the (set) keyand press the device key at the same time..
C:the LED will light at that moment then release the pressed keys..
D:PRESS THE SET KEY AGAIN THEN RELEASE IT. THE REMOTE ENTERS THE QUICK SEARCH MODE AND THE LED KEEPS FLASHING...
E:Point the remote at the device,then press the power key.see if it reacts or not.If not repete step E:

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find Colby tv codes to program into a rca converter box remote


RCA converter box remote control have no set-up code to Coby.

Feb 28, 2015 | RCA Televison & Video

1 Answer

Red Light Won't Stay On


1. Remove batteries from remote to "zero" it, then reinsert batteries
2. Turn on TV (RCA?)
3. Press and hold CODE SEARCH button until indicator lights
4. Press and release TV button. Indicator will blink and remain on
5. Enter code from list in instructions
6. Point remote at TV and press on-off button. TV should turn off
7. Use remote to turn TV on again and press CH+. If TV responds you're all set; if not, repeat the process with the next code

Nov 19, 2012 | RCA CRK76TE1 UNIVERSAL REMOTE - With...

1 Answer

Zenith a27b41w won't turn on. It just clicks whether using the remote or the button on the tv


Probably a power supply problem. The click could be a relay closing

Nov 04, 2012 | Televison & Video

1 Answer

My remote control won't pick up any codes for our tv


1) clean contact batteries with special spray contact.
2) retight the spring with plier for better contact batteries
3) replace new batteries.
4) resolder the wires for contact batteries.
5) You open the remote and resolder any point contact solder for cool solder.
6) Otherwise you must go to repair shop or replace by new from radio shack, i recommend satellite PRO .

sincerely God bless you

May 09, 2012 | Televison & Video

1 Answer

Rca 24" tv remote won't operate tv


If set turns on with the power button on set the remote is : not set to TV, not programmed for the set, has bad batteries or is bad.

If it even works one function it may need to be reprogrammed or taken apart to see if works---you can test the remote by pointing it at a digital camera with a LCD screen and pressing buttons to see if it makes the screen flash on the camera.

Test the remote first

Apr 09, 2012 | RCA Televison & Video

1 Answer

Remote won't turn tv off or on


Hello
Open the remote control and clean its touch pad side of the printed board.

Mar 13, 2012 | Toshiba Televison & Video

1 Answer

Won''t turn on the tv also cannot change the settings manually on the tv


Thanks for stopping by.

What is the model number and manufacturer of the TV you are trying to control with the CT-90157 remote?

Not all IR codes are programmed into all remotes.

Sep 26, 2011 | Toshiba CT-90157 Remote Control

1 Answer

Won't program to our new TCL television - we have the 222 receiver


I don't show we have a code for the TCL (Australia) brand TV. Below I have provided instructions on how to perform a power scan.

  • Remote: Basic Remote (Television Only)
    1. Turn the Television On.
    2. Press and hold the clear TV button for three seconds until the LED flashes.
    3. Press and release the red TV Power button.
    4. Press and release the Up or Down Arrow on the remote until the television turns off.
    5. After the television turns off, press and release the # button.
    6. Test functionality with the TV.
    7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Aug 14, 2011 | DISH Network IR Remote Control

2 Answers

I have a cogeco remote and i need to program it to get my sylvanna tv on video


Hello
Setup codes with One for all URC 3021.
For Sylvania dvd player is:
0675
For Sylvania TV are:
0054, 0030, 0171
OK.

Jul 25, 2011 | One For All URC-3021 Remote Control

1 Answer

NEED SONY CODES FOR PHILLIPS REMOTE


Universal Remote Control Simple Setup

* Point it at a TV set and press the Mute/Power button. (Mute button if TV is already on, or Power button if the TV hasnt already been turned on)

* Keep pointing it at the TV until the TV turns on or muted, most TVs respond in about 5 seconds, the most is up to 20 seconds. (Other universal television remote you find in stores take minutes to program and enter long confusing codes)

* Once the TV is muted or turns on, simply let go of button and you have total control. You can use the remote as if you had the original remote, and responds instantly. ENJOY YOUR FREEDOM of choices with our remote!
Most remote controls require minutes of programming a universal remote code into each television while you read the confusing instruction manual.

Jan 02, 2010 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trisonic Televison & Video Experts

Pablo Gonzalez

Level 3 Expert

733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69894 Answers

Are you a Trisonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...