I have a samsung wep185 headset. can you tell me how to switch it on?

1.first on samsung bluetooth device
2.press& hold call answer button in bluetooth device now light is on ,not blinking
3.and then search your bluetooth device by your phone and pair.

Another user tried 0000 just now and it worked immediately.
hold the button down for about fifteen seconds when you first switch on (you will hear the second beep)

The process of connecting to Bluetooth headset is as under:
1. Turn off your Motorola Bluetooth. 2. Now press and HOLD the main button for few seconds until it glows a solid blue light. 3. In your Samsung Strive, switch on the Bluetooth and search for Bluetooth devices. 4. Your Bluetooth headset name will appear in the list. Select pair or connect. 5. Enter "0000" as passkey.
Your phone will be connected.
Tell me if you have any problem.

set your mp3 ready to find your headphones.
1. Turn headset off 2. press and hold the "calling button" ---do not let go--- 3. slide the on/off switch to "on" don't let go of the "calling button" 4. it will flash blue red and purple (twice) then will turn solid blue 5. let go of the button 6. your mp3 should be able to find it now (that puts headset on discovery mode)

if it works for you don't forget to rate me
thx

If the headset has a flat end port it will go to the charger port as well. That's the thing with 90% of the samsung phones, the charger & the headset share the same port.

Hope that'll help you..

Happy Holidays.

**Please rate my post**
♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫

You don't have to reset it, all you have to do is:
1.) Make sure the headset is off.
2.) Push and hold the 'On' button until you see the exterior light stay blue (about 8 seconds). This puts your headset into discovery mode.
3.) On your mobile, go to the bluetooth menu and set it to search for Bluetooth devices.
4.) When it finds your headset, tell it to pair. If it asks for a passcode use four zeros "0000".

you have to switch the bluetooth headset to pairing mode not just swithcing it on. Hold the power on button continuously even after it switches on then the light will remain on. Then you switch on the bluetooth in the mobile and start searching for bluetooth devices. You will find your bluetooth headset in the mobile. Select it and pair. Usual code will be 0000, but it might differ check with the manual which can be found online too. This will definitely solve your problem.

1. activate bluetooth on handset (phone) then immediately.
2. Press and hold mute switch on wep180 for 8 secs until led flashes blue. Release button only after you see the flashing blue led which indicates the WEP180 is active.
3.Enter the pin 0000 which is the default pin code on the WEP 180 and the handset should connect to your WEP 180 - I dont know how to get it to pair with the PS3.

you throw it in a water now!!!!

The reason is because the headset onlys pairs once