Question about DVD & Blu-Ray Players
Power off LG DVX392H
Power On LG DVX392H
Wait for Hello ... Load ... NoDisc
When NoDisc then use Remote press open/close button
"000" (using Remote obviously)
The connected TV will display
Region Management Test Mode
Current EEPROM_REGION_CODE "x" <--
x being whatever code it is
Press new region number <0-6>: _
Press PAUSE key (on remote) to exit
LG logo should be displayed on TV Screen
Press Power button to shut down.
Power up and confirm if working
hope it helps!
Posted on Nov 02, 2008
You'll have to make it regionfree..
This hack must do it.. (this is only software to access the region menu, no firmware will be changed).
It will not enable 480i/p hdmi output, but all other resolutions works fine.
Posted on May 20, 2009
SOURCE: Need unlock code for LG V774W
I just tried this on LGV774W and it worked :))
To make this player region free (or change the region), do the following:
* Ensure that there is no disc in the player (ie: "no disc" is displayed).
* Press PAUSE
* Enter 314159
* Enter the region code (0 for region free, or 1-6).
* Press PAUSE
* Turn the player off for a few seconds.
* Turn the player back on
* Voila! You beauty!!
Posted on Sep 08, 2010
Tips for a great answer:
Feb 10, 2013 | DVD & Blu-Ray Players
May 20, 2009 | DVD & Blu-Ray Players
Mar 12, 2009 | DVD & Blu-Ray Players
Jan 19, 2009 | LG DR-4912 DVD Recorder
May 15, 2008 | DVD & Blu-Ray Players
Mar 31, 2008 | DVD & Blu-Ray Players
1,690 people viewed this question
Usually answered in minutes!