Question about Rado Diastar Anatom Jubile watch

1 Answer

I have a Rado DiaStar watch (with digital display), and the hands are out of synch with the digital display. Is there a way of adjusting the hands independently of the display? or must it be sent back to Rado for a full service (expensive!)? Thanks.

Posted by on

  • 1 more comment 
  • Anonymous Mar 20, 2014

    net to know how to set analog time

  • Anonymous Mar 25, 2014

    how can I remove the crown of a Rado Diastar

  • Anonymous Mar 28, 2014

    Bought new DIastar with sapphire and ruby on dial, black hour/minute hand with spanish day. How do i manually set time and date. Thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Hears how i do my watch, i have the same watch as you.Just make sure nothing is displayed on the clock face by turning the winder, ie NO digital time, NO daul time, NO alarm, NO stop watch etc, Pull out the winder(crown) and adjust the hands to the time you require by spinning the winder.(Gentley for mins and fast for hours) The digital clock will display wilst doing this, but not change the time.handy if you want to sync both clocks.Push the winder back in at the time to sync and the digital display will go out, then spin the winder again if you want to display the digital features. I hope this helps, please post if it does, Maurice Chevalier- Herts

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where to get a new. Watch strap


You can get Watch strap and everything of watch from The Prime Luxury Boutique. It is an authorized luxury watch retailer. http://theprimewatches.com/

Aug 09, 2014 | Rado Diastar Anatom Jubile watch

1 Answer

What's the price of this watch rado diastar


hi the watch i found is pretty much identical. only thing is anchor is at different angle. points straight down not to the right and its a females watch. price is bout 506 pounds or 895 dollars. hope this is useful to u.

Jan 21, 2013 | Watches

1 Answer

Hi, The first link on my Rado Strap has chipped. Can I get the link replaced without having to replace the whole strap.


Just go to your local service center found on www.rado.com and they will replace the link for you for about $25.

Jun 09, 2011 | Rado DiaStar watch #R20282192 Watch for...

1 Answer

I need new band


If you need a new band for RADO watch, you can pop in any watch shop and choose whichever band you like. The only thing you have to remember is; get the right size. Right size for you watch is the size between lugs in millimetres. Lugs are the things where the band gets attached to the watch. Measure that distance - this is the size of band you are looking for.If you are after original Rado band, then you will have to pop into your nearest Rado dealer shop and order it. The real thing will be far more costly.

Mar 01, 2011 | Rado Diastar Classic 300M R12639023 Watch...

2 Answers

How do i set time and date of my rado wristewhatch?


Hi - I have a Rado Jubilee-Black Face-Lovely Dial
Problem:Time is set with a Key - Back of the watch
I have LOST this Key & need to buy or get one?
Can you please advise - rozilamohamed@yahoo.com
Many Thanks
Ms>Mohamed

Feb 23, 2011 | Rado Diastar Anatom Jubile watch

1 Answer

Have Rado 193. am trying to sync analog and digital time. Manual says turning crown slowly adjusts minutes. Does not - only hours change


You can adjust the analogue hands without changing the digital ONLY when you have set the watch to 24hr fornat. Do this by going to the second Timezone screen (T2) and pressing the crown once briefly. If A or P appears, the time display is in 12-hour mode. If no letter appears, the time display is in 24-hour mode. To change mode, press crown briefly a second time.

Now go to the basic display where no digital info is shown. Pull the crown out. Now slow turning will adjust the minutes and fast turning the hours, but only of the hands. Therefore you can synchronize the two. After they show the same time, press the crown back in and adjust both times together using the crown as normal on the standard "Time" digital screen

Dec 28, 2010 | Rado Maxi R21347712 wristwatch

1 Answer

The release buttons on the clasp of my Rado Jubile wrist watch have lost their spring tension can it be fixed


mcdevito75 here, Best Bet with your Rado watch, Look for a small watch repair shop in your area for adjustment / replacement.

Jun 21, 2010 | Rado Diastar Anatom Jubile watch

1 Answer

Rado diastar swiss 196-0364-3


I bought the same watch recently and have the same problem. The hours can be adjusted in the dual time zone by looking up the manual, but the minutes stay put. I can't bring them to blink so that these could be adjusted. Any ideas? I sent a mail to Rado through their website but no answer.

Jan 06, 2009 | Rado Coupole R22531723 Watch

Not finding what you are looking for?
Rado Diastar Anatom Jubile watch Logo

1,078 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rado Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

10753 Answers

ray gallant

Level 3 Expert

36447 Answers

Are you a Rado Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...