Question about Philips GOGEAR SA6045 MP3 Player

1 Answer

My mp3 player is fully charged right! i try to play my songs. it says phillis then turns black screen,phillis then black screen,over and over it says this! i tried to plug it into my labtop and nothing pops up like it usually does. can anyone help me?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,596 Answers

Reset the player first. If that fails:
Recovery Mode for Philips' GoGear
Open the Philips Device Manager (Start à All Programs à Philips Digital Audio Player à SAXXX à Philips Device Manager) and click on the “Repair” tab. Then click on the “Repair” button to start the repair process. Most of the time, when your player is in that state, the Device Manager will not recognize that your GoGear is plugged in. If this is the case: Disconnect the player from the PC, and make sure the mp3 player is turned off. Hold in the volume + button on the mp3 player, and reconnect the player to your pc while holding in the volume + button. Continue holding the volume + for 10-15 seconds until a "Found New Hardware Wizard" pops up. It should recover your device if there isn't anything internally wrong with the player. Warning: this procedure will result in your songs being erased off the player, so they will have to be reloaded.
-Tha Mp3 Doctor

Posted on Nov 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

White screen on my zen


Please, watch this video which explains how to solve the white screen for your mp3 player:


http://www.youtube.com/watch?v=a8g0sh7pc54


1. Fully charge the unit.

2. Get a song to play.

3. Lock the device by moving the Hold/Power switch up.

4. Wait for the screen to blank to black, and also wait an ADDITIONAL 25-seconds after the screen blanks.

5. While holding the Play/Pause button down, move the Hold/Power switch out of the lock-mode, and all the way down (like you're turning it off).

6. Release the Play/Pause button.

Feb 03, 2011 | Creative Labs MP3 & Digital Media Players

2 Answers

I just bought a Jensen smpv-2gbub player. How do




How to charge the Jensen MP3 player - Model smpg-v2bub

Ignore instructions that came with it - they don't work.

Here's how to charge - I discovered this with mine:
1. When computer is on and at windows screen, attach cable from computer to mp3player with mp3 turned player off. It will immediately show you a connect screen on the mp3 player.

2. pressed the left side middle button twice - this will turn it on and go into music like you're playing a song.

3. Now turn the mp3 player on by switching the button on the right side of the device to the on position. It will suddenly show you it's charging - the battery on the front of the mp3 player will have a signal pulsing through it.

4. It will turn off after one minute. It's literally half charged now. Strange I know. Repeat from step 1 and it will fully charged.

If it doesn't fully charge after it turns itself off after 1 minute the 2nd time, then repeat steps from 1, one more time, but this time when it turns itself off after a minute, still leave it connected to the computer for 10 mins even though it looks like it's off. Then disconnect it physically from computer, turn it on with the on button on the right side, press the left side middle button twice and look at the battery on the screen - it should be fully charged now.

Apr 07, 2010 | Jensen MP3 & Digital Media Players

1 Answer

Jensen SMPV-2GBUB wont turn on or charge


How to get the Jensen mp3 to charge - model smpv-2gbub,

transparent-pixel._v42752373_.gifIgnore instructions that came with it - they don't work.

Here's how to charge - I discovered this with mine:
1.When computer is on and at windows screen, attach cable from computerto mp3player with mp3 turned player off. It will immediately show you aconnect screen on the mp3 player.

2. pressed the left side middle button twice - this will turn it on and go into music like you're playing a song.

3.Now turn the mp3 player on by switching the button on the right side ofthe device to the on position. It will suddenly show you it's charging- the battery on the front of the mp3 player will have a signal pulsingthrough it.

4. It will turn off after one minute. It's literallyhalf charged now. Strange I know. Repeat from step 1 and it will fullycharged.

If it doesn't fully charge after it turns itself offafter 1 minute the 2nd time, then repeat steps from 1, one more time,but this time when it turns itself off after a minute, still leave itconnected to the computer for 10 mins even though it looks like it'soff. Then disconnect it physically from computer, turn it on with theon button on the right side, press the left side middle button twiceand look at the battery on the screen - it should be fully charged now.

Jan 30, 2010 | Jensen MP3 & Digital Media Players

1 Answer

2 brand new, will not power up, fully charged, full of songs.


Did you remove protective packaging on batteries?

Jun 28, 2009 | Samsung YP-U3 MP3 Player

4 Answers

My Creative Zen has a white screen but syill plays music


http://www.youtube.com/watch?v=a8g0sh7pc54
1. Fully charge the unit
2. Get a song to play
3. Lock the device
4. Wait for black screen and leave it like that for 20 seconds
5. Hold the play/pause button down and move the side switch out of lock mode, then push all the way down (like you're turning it off) and release (back to middle position)
6. Release the play/pause button

Sep 19, 2008 | Creative Labs Zen Digital Media Player

2 Answers

Samsung mp3 player YP-F1 screen diplay won't turn on-even when fully charged


I have samsung yepp YP F1. After full charge, it only appear "loading" and somebody told me to reformat the unit. My question is how do i reformat the unit. thanks - - ronnie

May 09, 2008 | Samsung Yepp YP-F1X MP3 Player

3 Answers

What does Error 4 mean?


  1. Go out and sell it on ebay. Say only one problem with it. And under description say special software needed to use correctly. make sure it is at a low price and yoou put correctly, cuz half th people on ebay dont use the things correctly. 

Mar 03, 2008 | Coby MP-C7085 MP3 Player

1 Answer

Blank Screen


try holding both the play and power button at the sametime for 20 mississippi.

Dec 26, 2007 | SanDisk Sansa e260 MP3 Player

7 Answers

Coby MP-C582 Will not turn on


Check on the side of the player and make sure it is not locked that was why ours would not turn on. Once I unlocked it worked fine

Dec 24, 2007 | Coby MP-C582 MP3 Player

2 Answers

Mp3 player wont play songs or anything


Only 2 suggestions here: 1) Make sure your HOLD switch is not enabled. 2) Try to update the firmware If neither of these work, time to send the unit back to Sandisk

Aug 09, 2007 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
Philips GOGEAR SA6045 MP3 Player Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips MP3 & Digital Media Players Experts

Herby0802

Level 2 Expert

48 Answers

Pieter Vleeshouwers

Level 3 Expert

1416 Answers

mac colar

Level 2 Expert

421 Answers

Are you a Philips MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...