Question about D-Link DIR-625 (790069292637) Wireless Router

1 Answer

D-link dir-625 still cant acces wirelessly

The 625 wireless router is setup wired to my laptop. Cable modem has ethernet cable going to the Wireless router, another ethernet cable going to the Laptop from the wireless router. How do I disconnect the Laptop from the wireless router and still be able to access the internet wirelessly, without being connected to the router with the ethernet cable from the Laptop. In other words grab my laptop and connect to the internet from anywhere in range. The network has been built also. I cant get the Laptop to connect to the network without it being wired.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 6,487 Answers

If your laptop has a wireless capability you should be able to connect to the wireless network of your router, just view the available wireless network select the wireless name of your router and connected to it if it already say connected try to disconnect the ethernet cable from your laptop and access the internet wirelessly..........

Posted on Nov 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a D-Link Wireless N 150 Router, Dir 600L. I am unable to setup the same. Do I need a Modem also to setup this router or I can setup without a modem?


You can setup a wireless network without a modem. It will allow you to share printers, files ect. The modem is required for an internet connection only. The modem basically translates the Ethernet traffic in to a signal that can be carried over your respective service, DSL over a POTS line or broadband over a coax cable. The word modem stands for MOdularDEModular note the word MODEM in there.

Dec 24, 2012 | D-Link DIR-600 Router

6 Answers

D-link DIR-625 wireless router is setup and wired to laptop


First of all make sure the Wireless switch in your Laptop is turned on.

Now Disconnect the cable from the Laptop to the Wireless router

Now go to your Wireless Network connection and search for the available network. Select the appropriate network and connect.

Thanks

Nov 01, 2008 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

I don't know how to reset password for d-link DIR-625


dlink-dir625-product-manual-6bbabb3_7_38422f64.png

Section 1 - Product OverviewHardware OverviewConnectionsUSB Connect a USB 1.1 or 2.0 flash drive to configure the wireless settings using WCN.Reset Pressing the Reset button restores the router to its original factory default settings.LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and hubs.Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.Power Receptor Receptor for the supplied power adapter.D-Link DIR-65 User Manual

If you don't know it you can check our list of default router and modem password list here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Sep 23, 2011 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

I currently have DSL service. I just received a hand me down d-link DIR-625 router. I do not have the set-up disk. I want to run DSL on my desktop computer since it doesn't have a wireless adapter. I also...


Use an Ethernet cable from the Ethernet port on your DSL modem to the 'WAN' port on the router.

Use another Ethernet cable from one of the 'LAN' ports on the router to the network-port on your desktop.

Click Start
Click Run
Type CMD
Press Enter
Type IPCONFIG
Press Enter
Look for output like: ... gateway ... 192.168.123.456
Start Internet Explorer
Type http://192.168.123.456 (or whatever value you saw)
Login to the router
Run its "Wireless Network Setup Wizard" to:
* set an SSID
* set an encryption-level, e.g., 'WPA' or 'WPA2'
* set a password
Use the SSID/password on your wireless laptop.

Mar 30, 2011 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Router shows up strong on laptop and I tested internet by plugging ethernet directly into laptop, but router not allowing access or sending internet


Have you connected the modem to the router using the proper wire?
This wire was provided by your ISP and is not a patch cable.
It must be plugged into the uplink port on your router from the modem box. This port is also called the wan or internet port on some routers.

Mar 12, 2010 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

I have an issue with my Dlink DIR-625 wireless and cable modem


it isn't syncing up with your modem, try a hard reboot, disconect everything, even the cable, after 5 minutes , first screw the coax cable back to the modem, that will re establish the cable connection, plug everything back in, and if that pc light still is still doesn't work, the router may be bad, look on the Dlink site and download the latest firmware, as a last resort, but also reset the router first before trying anything, there is a reset button on the router. Sometimes certain routers don't work with certain modems, if you try the reset, then the hard reboot, and the firmware, you have covered all the bases

Mar 30, 2009 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Can not connect to Internet wireless or through router to Ethern.


call service provider (isp) to insure they have routers mac address. I cannot stress this enough

Mar 01, 2009 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

D-Link connect to comcast


connect the the ethernet cable to the WAN port of the modem.

the connection should be:
One end of the cable is connected to the modem and the other should be connected at the WAN port of the modem.

Now use another Ethernet cable plug it in on the LAN port1 and the other end to your computer.

Access the configuration page of your router and set the wireless setting inside your DI-624 router.

Dec 10, 2008 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Cant connect cable modem


If you have phone (DSL_ the phone must be connected to the modem of DSL, then connect the ethernet cable from the modem to the wireless router or router (use the jack WAN) and then from the modem (connect the cable into port # 1) goes to your PC into your ethernet card.

You have to access to your router and set your network (you have to put the data of your internet connection gave to you by your internet provider (usually is your email address and your pass)

You can get more help here:

http://www.microsoft.com/athome/moredone/wirelesssetup.mspx


If you have a wireless network Then do this:

Setting wireless network on Win XP
Click your Start Button
Select and click Control Panel
Select Network Connections
Select Wireless Network Connections
Right click
Select View Available Wireless Networks
5. Highlight the network you want to connect to
Click Advanced
6. Select the wireless network tab
7. Highlight the network in the available networks window
9. Click configure
9. IN the Properties Window
Double check the SSID (network name)
Enter the WEP KEY provided to you by the office
Click OK

Nov 17, 2008 | D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?
D-Link DIR-625 (790069292637) Wireless Router Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...