Question about Computers & Internet

2 Answers

RF-Tech 433 MHz Problem

I've lost my instruction manual and after changing my batteries, I cannot get my station to reflect Farenheit temperatures nor can I reset the time.

Could you send the instrucation manual via .pdf to my email address?

Thank you.

R. Jones

Posted by on

  • HNASNURRA Nov 14, 2008

    I have lost the instruction for RF-tech

    Hans Nämvall

    Näset 15

    S- 76192 Norrtälje


  • MachMick Dec 04, 2008

    I've also lost the manual but I have figured everything out except how to get the remote 433 Tech working. Changed battery in remote and main receiver is not picking it up. Pushed the little yellow button on the back of the remote but still does not work.





2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the instruction manual, send me a mail:

Posted on Jan 30, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had to replace the batteries on mine and noted there was no way to set the time. I could select the time zone. I put the unit near a window and left it there. When I came back later the unit had set itself with universal time input. I then took it to the bedroom where I had it and its been working.

Posted on Nov 11, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Weather station is not cars and trucks but one that sits in our master bath telling me time and temp inside and out.

Hello Bob Loomis,

The joyous world of MODERN TECHNOLOGY...

From MY meager research... MAKE & model are
paramount in FINDING ANY MEANINGFUL direction.

I am posting a sample from "MANUALSLIB.COM..
The INSTRUCTIONS are less important than the
WEBSITE... (Have a look)
Technoline WIRELESS 433 MHz WEATHER CLOCK Instruction Manual Page 5

ManualsLib Makes it easy to find manuals online

Hope this helps

Carnac the Magnificent

Nov 09, 2017 | Taylor 1541 Wireless Weather Forecaster...

1 Answer


Let's find out. Google (ACCU-TEMP)(IW007A)(manual) without parens.

Oct 27, 2016 | Measuring Tools & Sensors

1 Answer

Need an operating manual

go to or or
God bless you

Jul 25, 2012 | Springfield 91905-002 Wireless Weather...

1 Answer

WEATHER STATION AC100MB stops transmitting outdoor temp

I have experienced the same with numerous different, "quote un quote" atomic clocks! Please don't forget that this sender unit, that goes outside, generates a RF Singal to be received by the clock inside. This unit transmits a signal 433 MHz signal approximately every. 3 minutes, and after so many years the sender unit's RF section(electronics) just goes out or no longer function properly or not at all! The transmitter/sender for this model number, according to "3M" is obsolete and can no longer be furnished, DRATTS !!!!!

Mar 20, 2012 | 3M Measuring Tools & Sensors

2 Answers

Lost Rf tech 433 mhz weather centre's outdoor sensor

I have a RF-tech 433 MHz transmitter for sale, $25.00 includes shipping.

Jan 06, 2009 | Computers & Internet

11 Answers

Rf tech 433 mhz

I had the same problem and finally found my manual. Here's what to do, everyone!

1. Take back panel off the sending unit, where the three batteries are, by unscrewing the 4 phillips head screws (assuming you, like I, had put the screws back in after installing new batteries). You will see a little gray button in a hole above where the batteries are; the little button is one you can push down with the same phillips screwdriver you took the 4 screws out with - don't do this yet.

2. Now, hold down the "channel" button on front of receiver panel for 2 sec, until the dash in the "ch" box and the place where the temp is supposed to be starts blinking.

3. Now, while these indicia are blinking on the panel, push the little gray button down and hold it for 2 seconds. This causes the transmitter to "register" with the receiver. You should now see a 1 in the "ch" box and get a temp reading.

4. Put screws back on, put receiver where you want it, proceed with rest of your life.

Feb 21, 2008 | Computers & Internet

8 Answers

Temperature Transmitter

You need new SioScan Temperature Transmitter 433 MHz. Take a look on amazon La Crosse Technology TX6U Wireless Temperature Sensor for 433 MHz units.... Hope this was helpful. cheers

Oct 16, 2007 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,927 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14162 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides