Question about PC Desktops

3 Answers

Mp240 Canon printer not responding. - PC Desktops

Posted by on

  • Anonymous May 04, 2009

    We installed the printer and for the first week had no problem, second week it stopped working- Ink is not the issue, and it keeps popping up 311 error.... should i try reinstalling?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Just go to the printer folder right click the printer and then choose properties then click the ports tab and find a usb port. check it and click apply. then it should work. if not then i cant help you sorry. i had the same problem and the sollution was the port.

Posted on Oct 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cannot get my new mp 240 printer to work on my Vist laptop. I have installed it on my XP windows no problem. When using Vista it says "cannot print due to the printers status". Can you help

Posted on Nov 25, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

Helloo there!
Maybe you need to Unistall the driver of your printer.
Then Change the USB port you are using, and Finally Install the driver again.
This should fix your problem.
Other methods you may use if this is not working:
1- Make sure your Printer is not out of Ink!
2- Make sure the USB cable is working properly.
3- Try the printer with a new Computer.

Hope it works!

Posted on Nov 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer is offline and I cant change that...why?


Sometimes printers get too hot and they stop responding. The solution is to turn it off long enough for it to cool down. It is also possible it is defective hardware. A common component that goes bad is the electrolytic capacitor. These are cylinder shape and contain a liquid. When they get too hot, they puff up and vent. Bad caps can result in a variety of annoying symptoms including 'locking up' or 'hangs'. A lot of times all you have to do is reset the device by turning it off and on, but the symptoms will get worse because more capacitors will go bad until a chip burns out or a fuse blows and then it won't work at all.

May 29, 2014 | HP PC Desktops

1 Answer

Where can i download a free driver for Canon Inkjet Photo Printer PIXMA iP1980? I've lost to CD-ROM. Thank you


You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload : - http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Jul 24, 2011 | PC Desktops

1 Answer

Canon printer ip1300 pixma driver


You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Dec 22, 2010 | PC Desktops

2 Answers

I need canon LBP 1210 printer driver for ubuntu.


visit http://www.download.com or just simply search for printer driverfs online.

May 19, 2009 | PC Desktops

1 Answer

Printer not responding


Try reinstalling the drivers from the cd it came with or get them here http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=18065#DownloadDetailAct

Apr 29, 2009 | PC Desktops

1 Answer

My mp240 printer will not work on Vista Windows


Go to printer's manufacturers WEB site and download the Vista driver for your model printer.

Nov 25, 2008 | PC Desktops

1 Answer

I have a canon bjp 3000 and it is showing a 7 orange light flash and will not respond to and anything


Try the following steps to reset printer:
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data

Should that fail, unplug the printer from AC power source (wall socket) and from PC. Wait about 5 minutes, replug and reconnect to PC and power on.

If even this does not work, there is a problem with the printer's logic board, and you will either need to get it serviced, or buy a new one (whichever works out cheaper for you...)

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Oct 09, 2008 | PC Desktops

1 Answer

Lexmark X73 is on my hardware and when attempting to print the printer will not respond. The CPU was removed to fix another issue and the printer was re attached again but does not respond. Pls. advise...


Hi, you can check for communication between your printer and your desktop. You may want to uninstall your printer driver and let windows search for your hardware. If it does recognize it, your printer is ok and you may just have to reinstall your printer driver. If it doesn't work, you may inspect your printer's cable for damage and change if defective.

Oct 01, 2008 | PC Desktops

1 Answer

We have a canon pixma mp450 printer and we lost our cd and we cant add printer to a differnt computer we have


you can download the software on canon site, just have your printer model ready , download the software and run it to the computer where you want to add the canon printer.

Aug 04, 2008 | PC Desktops

1 Answer

I would like to install a canon i550x printer to a windows xp computer.I have no disc or documentation for this printer though as was given it. Have tried to add a printer by going to control panel but...


Here is the link to the drivers and software for this printer:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=331&modelid=8046

This link goes to the picture software:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=331&modelid=8046

This link will take you to several user manuals and guides:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=331&modelid=8046
They are in PDF form so you have to have acrobat reader installed.

Download the above to your desktop for easy finding.
Rebooting your pc with the printer connected will prompt it to 'see' the printer and bring up the add new hardware wizard.
Direct the wizard to where the driver files are and it should install
them automatically.

Apr 25, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

2,325 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...