Question about Texas Instruments TI-82 Calculator

Press the second button and Enter (Entry) and your problem will appear in the next line

Posted on Nov 23, 2008

Press MODE then select "Normal" on the top line.

Feb 21, 2015 | Texas Instruments TI-82 Calculator

If the result is positive, type in the integer part then add the fraction part either with the help of the fraction key or the division key. (I do not think that the TI82 has a fraction key.

If it is anything like the TI3 there is command under MATH >Frac. It should be pressed after you enter the mixed number to keep the result as a fraction.

If the mixed number is negative you enclose the whole number in parentheses. Press the change sign (-) key to negate the result.

If it is anything like the TI3 there is command under MATH >Frac. It should be pressed after you enter the mixed number to keep the result as a fraction.

If the mixed number is negative you enclose the whole number in parentheses. Press the change sign (-) key to negate the result.

Sep 26, 2012 | Texas Instruments TI-82 Calculator

1 . 0 7 ^ 3 0 ENTER

^ is the key just above the divide key.

^ is the key just above the divide key.

Apr 04, 2011 | Texas Instruments TI-82 Calculator

Be sure to use the (-) key (just to the right of the decimal point) to enter the negative exponent, not the - key you use for subtraction.

May 20, 2010 | Texas Instruments TI-82 Calculator

Press MODE to enter the mode editor. Navigate to the 2 on the second row and press ENTER. Press 2ND QUIT to exit the mode editor.

Apr 23, 2010 | Texas Instruments TI-83 Plus Calculator

From the lack of a response I assume this is no longer a problem. If it is still a problem, please post a comment specifying the error message.

Feb 17, 2010 | Texas Instruments TI-82 Calculator

Well, there are 2 ways, the easy way and the hard way, and I will give both.

EASY: the [+/-] button should be near the [ENTER] button

"HARD": type in "0" and then subtract the number that you want negatave and "FixYa!"

P.S. If this solved your problem please rate it as best answer.

EASY: the [+/-] button should be near the [ENTER] button

"HARD": type in "0" and then subtract the number that you want negatave and "FixYa!"

P.S. If this solved your problem please rate it as best answer.

May 12, 2009 | Calculators

Hello ronsky123. I sorry no parts from TI for TI-82. You may find one for sale by an indivdual or one with a different malfunction & put 1 + 2= 1. Good Luck.

Sep 14, 2008 | Texas Instruments TI-82 Calculator

Hello fezzaniaahmed. Im sorry to inform you no parts from TI for the TI-82. You may find another TI-82 with a different problem and 1+2=1. Good luck.

Jul 19, 2008 | Texas Instruments TI-82 Calculator

here are the steps in changing it from radian to degrees

1. turn on your TI-83 plus

2. press the MODE button near the top of your calculator

3.go down to options and move the highlight from radian to degree, press enter and clear

you're good to go

1. turn on your TI-83 plus

2. press the MODE button near the top of your calculator

3.go down to options and move the highlight from radian to degree, press enter and clear

you're good to go

Feb 17, 2007 | Texas Instruments TI-83 Plus Calculator

180 people viewed this question

Usually answered in minutes!

×