Question about Philips 28PW6506 28" TV

1 Answer

Controls not working on Philips 28" TV

Model - 28PW6515/05 My tv remote control slowly stopped working and I resorted to using the controls on top of the TV which gave me limited control - channel and volume. The problem started with the tv slow to respond to the remote control signals about 12 months ago and then the remote stopped working altogher. The buttons on top of the tv for changing channel and volume worked for a further 12 months but have now stopped working at all. I have tried a one for all remote as well but this does not work either - problem seems to be with the remote control receiver or something. There are no picture problems. The control batteries are okay and it works on another Philips TV I have. Anyone got any ideas? Thanks, Alan

Posted by on

1 Answer

Re: Controls not working on Philips 28" TV

We had this problem with a 28PW6515. The control would work for 30 seconds after switching on, then nothing. It was diagnosed as the "glue chip" which handles all the control functions. About £200 to fix it as it's a surface mount chip.

Posted on Jun 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Controls not working on tv

Just do a hard reset, or a system reset to this TV. To make it a hard reset, unplug it from AC power socket, and re-plug it back after 20 minutes or so. This will make it a hard reset. To make it a system reset [factory reset], you have to enter its service mode option. Even though it can be done externally using the remote control, the procedure is somewhat semi skilled one; so will be better to contact any service technician. If you wish to get some details, check the site linked here. Surf the site in "MOSAIC" view. It will make surf easy. Surf the site with patience.

Jan 25, 2014 | Philips 28PW6305 28" TV

1 Answer

Model 42pfl3603d/f7 tv stopped receiving signal from remote.. remote IS working.. side controls on tv work it just does not process the signal from the remote.. unplugging does not help.. any ideas?

If you find the remote sensor eye located on the front of the TV, you are there!!! There is a small sensor board and a TV tech will have to replace this for you. There is usually a capacitor, resistor or diode that will need replaced. I replaced the remote sensor board. Thanks for asking and show a few hands of support.

Jan 11, 2011 | Philips Standard (CRT) Televisions

1 Answer

Model F32674SB remote


You can use any of the universal remote controls

For programming the remote you can see the video below which is given for RCA universal remote control.Same steps are incorporated for all make.


Jul 23, 2010 | RCA F32674SB 32" TV

1 Answer

Philips TV model 34PW9815/17 the LED on the front of the unit turns green when first plugged into electrical outlet, and then immediately starts to flash red. nothing on the unit works and it doesnt...

Philips TV model 34PW9815 the LED on the front of the unit turns green when first plugged into electrical outlet, and then immediately starts to flash red. nothing on the unit works and it doesnt respond to controls either on the set or the remote

May 12, 2010 | Philips 32PT81S 32" TV

1 Answer

Remote code required for UK Bush tv model WS6680SIL/C7

Found the correct code for my TV & Sky remote... I searched a fair bit more on google for... "WS6680SIL/C7 code" and found... which the correct code for my Bush TV - 0742. Others you may want to try are Bush 0157 246, 263, 377, 037, 064, 065, 310,300,383, 399, 391, 402, 339. or Beko 0125 514, 398. Further, Alba Group are the firm whom own Bush brand amongst others. Google Alba Group to get their site and links to Bush sites.

May 20, 2008 | Bush WS6671 28" TV

1 Answer

Volume controls dont work when using remote

I would start by trying other codes on the universal remote. Sometimes codes will only work part of the remote such as the numbers or channels but not volume. Your motorola cable remote sounds like it may only need a good cleaning. sometimes when you take remotes apart it will look like somthing got spilt in it. I would start there first.

Mar 17, 2008 | Sanyo DS27910 27" TV

1 Answer

Toshiba TV Remote Control not working

i have bought universal remote controls and they do not work. what can i do? i have bought rca universal philips universal remote,

Nov 17, 2007 | Toshiba 36HFX71 36" TV

1 Answer

Philips wide screen TV

OK sorted the problem on my set. Replaced the capacitor ref: 2455 on main board it is a 47uf 25v but i was told a 35v will work as well? But mine is a 28pw6506/05

Nov 08, 2007 | Philips 28PW6506 28" TV

Not finding what you are looking for?
Philips 28PW6506 28" TV Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

655 Answers

Jim Evans

Level 2 Expert

186 Answers


Level 3 Expert

485 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides