Question about Bernina Artista 180

2 Answers

What is lastest version of artlink w/ 180e to use with new .ART files

I' ve bought some .ART files online to use with my V2.0 Artlink program. However, it is too old to read these new files. I've seen a V4.0. Is this new enough?

Also anyone know of any other editing / designing programs under a $1000 to be used with the old machines (Artista 180's etc). Doesn't seem right that noone has figured it out yet......

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

YOU COULD BUY ONE OF THE "OSED EXPLORATIONS" EMBROIDERY PROGRAMS. CLASSIC FOR AROUND $359 OR GALAXY FOR AROUND $850. THIS WORKS WITH BERNINA MACHINES.

Posted on Nov 10, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Yes you can use V4.0 artlink it is available in some markets upto V5 it just depends what version the designs were done in. If it was higher than V4.0 you may still have an issue. Have a look at some of the programs like Embird for more cost effective ways to edit designs but you will still need Artlink to load designs onto the machine.

Posted on Nov 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bernina 440QE embroidery setup. Everything is hooked up correctly, artlink 8 downloaded but can't write to machine, it will time out. How do I fix this?


Hm, you might check with Bernina. Artlink 8 may not be compatible with the 440.

You might try joining the Yahoo group (430_440_630_640_730@yahoogroups.com). You need to have a Yahoo account and then search the groups. Very helpful information there. I know there have been conversations about using Artlink 8 and Artlink 5.

Jan 15, 2018 | Bernina Sewing Machines

1 Answer

How do I connect a 180e serial cable to my usb computer when Artlink and CPS software specify serial port?


I've not successfully managed this ... trouble-is that although you can get USB-to-serial converters, most computers that only have USB ports do not properly 'recognise' COM ports, which is what your Artlink software expects to talk to. I still use an old PC with a 'proper' 9-pin serial port on the back in order to talk to the old Artista range of machines. One of the drawbacks of a 'throwaway' PC industry that expects the rest of the world to continually update everything in response to new interface standards!

Oct 08, 2011 | Bernina Artista 180

2 Answers

My Bernina Artista 180E no longer works with updated Windows. Is it possible to upgrade so that I can still use my 180E and not have to buy another machine?


Just use the free download software from Bernina called Artlink. I used it along with a USB to Serial converter cable to connect to the machine. Works wonderfully. Allows me to still use my old Artista designer software if I want to on an older machine and then when I want to actually transfer the designs I use the laptop with the USB cable.

Feb 01, 2011 | Bernina Artista 180

1 Answer

I purchased a CD Rom embroidery which had the usual formats on its cover, including art. which is what I need. I could open the CD on my computer, but when I tried to send it to my Artista 180, it told me...


How did you try to transfer the ART design to your 180? It needs Artlink by Bernina to do so or the Bernina Designer program. There are different ART versions and as I know, only the Designer can convert it to the version that your model can handle. I also own some CDs and never had any problem transferring any to a Personal Design card or stitching them out with my Bernina 165.

Apr 05, 2010 | Bernina Artista 180

2 Answers

Seeking ARTlink V2.0 - Service Pack Driver Update 2.19


Another possible approach. Again, researching for my own problems, I wrote to Bernina. They gave me the link to the old database, which, well, maybe it's just me, but I couldn't find this from their current site. I saw some info about an Artlink download that is available, but not supported, so maybe it's the one you want. Hope so. .

http://berninasupport.custhelp.com

Jan 02, 2009 | Bernina Artista 180

2 Answers

Bernina Artsita 180


Bernina has a new version of Artlink available from your local dealer. It is not free, older versions do not work with Vista, sorry for the bad news.

Feb 25, 2008 | Bernina Artista 180

2 Answers

Changing from windows XP to Vista


If you are talking about Bernina artlink software here is a patch, but you nbeed to register. Check it out

Feb 25, 2008 | Bernina Artista 180

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bernina Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1133 Answers

jnissen

Level 1 Expert

26 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Bernina Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...