Question about 2wire 2700HG-B Router (2700HGB)

1 Answer

Does not finish loading data

This started a couple of months ago. It's like I need to kick in the rear to get it to do something. I'll go on line or to a web site and it will just stop loading the page (the green bar, lower rt screen) I would click stop then reload and it would finish loading the web page after a couple times of that. Is it my computer or the Router??

Thanks any help is greatly needed.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

I would start investigating from the browser. Which browser do you use? Internet Explorer?
Go ahead and download Google Chrome (a light weight browser) from http://www.google.com/chrome, then install it and give it a try. If that solves it, that means your problem was due to the browser. You can either keep using Chrome, or download the latest version of Internet Explorer and re install it.
Good luck!

Posted on Nov 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

53udx10b hitachi rear projection big screen. replaced convergence chips 2 months ago. Worked awesome. Started having power issues 3 weeks ago. Turn on - kicks right back off. Used to be able to turn...


Sounds like the problem started out with an intermittent solder connection possibly on the deflection PWB unless the power relay has a bad connection or is breaking down under load. If it is not the power relay, I would check the connections under the deflection board - paying close attention to the area from T701 and T752 including the Horizontal output Transistor for a short. You also have a possibility of defective filter capacitors causing the problem as well.

Jan 29, 2011 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

My agitator keeps coming off


The coupling under the agitator is stripped and must be replaced.
It is a easy fix.

May 05, 2009 | GE WHRE5260E Top Load Washer

1 Answer

Dryer motor has trouble starting


sounds like you are having or go to have a motor problem repl/ motor

Dec 29, 2008 | Dryers

1 Answer

2002 Chrysler Sebring


was the tranny changed by friends or the dealer. This car is picky for what fluids and mech thats done to it? Check autozone for help aswell

Dec 24, 2008 | 2002 Chrysler Sebring

1 Answer

Interlaced comes in fuzzy & with lines


you need to check if the dvd or games are doing the same thing on different inputs. if they have the same problems you might be looking at the single board or the focus block.

Dec 01, 2007 | Akai PT5598HD 55" Rear Projection...

1 Answer

Sony 32XBR400 Wont Power On


I do not believe the set is too far gone. The standby light blinks codes up to 7. If the standby light blinks more than 7 times it usually means that there is a short on the clock or data line. There are several small zener diodes connected to the clock and data lines in a couple of different places on the main board. Many times I have seen one of the zener diodes become very leaky, usually along the back of the board, loading down the clock or data line which produces the symptoms you are seeing. If you have no experience locating shorted zener diodes and unsoldering and soldering small parts, allow a qualified tech to service the set for you.

Aug 27, 2007 | Sony KV-36XBR400 36" TV

1 Answer

Samsung HC-P4752W Blurred


im sorry for this not being a solution, but I have the exact same issue Jose. It just happened 3 days ago. When I run auto focus it says check factory default settings. Will replacing the 2 CI's help cure this problem.

Jul 28, 2007 | Samsung HC-P4752W 47" Rear Projection...

Not finding what you are looking for?
2wire 2700HG-B Router (2700HGB) Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top 2wire Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

noti13

Level 1 Expert

15 Answers

William Dehn
William Dehn

Level 3 Expert

318 Answers

Are you a 2wire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...