- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
plug in the binoculars then go to control panel/device manager look for the yellow exclamation mark right click it and choose update drivers allow it to go on the internet to find the drivers. You may have a 64 bit computer with an older software that only works on 32 bit. We'll see if the manufacturer tried to make a driver for both.
In most cases, the driver for a printer is supplied when you purchase it. It is the responsibility of the manufacturer to provide the driver along with the device to make sure the working. However, most of the Operating Systems come with native driver support for many known printers. This is the fact we have to take care while purchasing a printer. Even though we misplaced the driver disc, if we purchase a good manufacturer printer, there is a chance to get the native support from Operating System itself. There are some scenarios where printer may not be recognized by the Operating System due to some conflict with other devices. Please follow the troubleshooting steps and check the operation:
Ensure that the supplied USB cable is firmly connected to both the printer and computer side.
Ensure that the USB driver for the printer has been properly installed. Please follow the steps to ensure that:
Turn ON the computer and then printer.
The Add New Hardware Wizard window will appear on the Computer screen.
Click the Nextbutton
Insert the installation CD in to the CD/DVD drive on the Computer.
In the Add New Hardware Wizard window, click to select the CD-ROM drive.
Click the Next button.
In the Finish Setup dialog box, click the Finish button.
If the USB driver for the Printer has already been installed, uninstall and then reinstall the driver.
Follow this procedure to reinstall the device driver using the Device Manager utility. IMPORTANT: This procedure must be performed while logged in as Administrator or to an account with Administrator rights.
Click the Start button, and then click Control Panel.
In the Control Panel window, under Pick a category , double-click the Performance and Maintenance icon.
In the Performance and Maintenance window, under or pick a Control Panel icon, double-click the System icon.
In the System Properties window, click the Hardware tab.
On the Hardware tab, in the Device Manager box, click the Device Manager button.
In the Device Manager window, double-click the category icon of the device to be removed.
Under the Device Manager category, click to select the device to be removed.
On the menu bar, click Action.
On the Action menu, click Uninstall .
In the Confirm Device Removal window, click the OK button.
Restart the computer.
NOTE: For some devices the operating system will display a System Settings Change window. Click the Yes button to restart the computer. When the computer restarts, the operating system will find the device and install the driver. If the operating system is unable to automatically find the driver, have the installation wizard search the C:WINDOWSI386 folder.
Remove and reconnect the printer.
does not recognize printer XP computer does not recognize printer. HP printer computer connectivity how to troubleshoot if printer is not connecting to my computer. XP printer issues. how to troubleshoot printer conncting with XP Computer. XP does not recognize printer. Printer is not connecting to my computer. how to reinstall printer driver. how to install native driver for printer. CANON printer is not recognized by the Computer. Epson printer is not recognizing. Epson does not recognize XP. Canon Printer connectivity.
After Reinstalling Window XP did you install the driver for your graphic adapter (VGA driver). If you'll not install the graphic driver it happen with the resolution, and about your mouse. you might be using USB mouse and it need to install driver too, but in case of your mouse window automatically takes the driver , you don't need to do anything.
I believe you might be canceling the installation of HUMAN INTERFACE DEVICE installation during the time of your window start up process.
About your Display, I hope you might have the proper driver installation CD.
Follow this link to A4Tech website and follow these instructions: 1 ) Press Download button to download the driver - work for Win98, Windows 2000/XP/Vista/Win 7. 2 ) Save it somewhere where you will remember after download. We recommend that you save it on your desktop , so it will be easy to find . 3 ) After successfully downloading the driver , do not open the driver file until you make sure the following has completed : ***REMOVE / UNINSTALL any original mouse driver from the PC . ( If you forgot to do this part , your driver may not be able to install correctly and successfully later ) 4 ) After the original mouse driver has been removed , open the downloaded file . 5 ) Follow the on-screen instructions . 6 ) When it's successfully installed , please restart your computer . 7 ) After you have restarted the computer , plug the webcam into your computer and it will automatically recognize the new hardware.
You'll likely need either a driver disk for your SATA drive to be recognized by Windows XP during installation or Windows XP with Service Pack 2 built in to install without a driver disk.
Creating a Windows XP installation CD with Service Pack 2 or "SP2" built in is fairly straight forward. This is called "slip streaming". Step - by - step directions can be found in the following links:
first of its you should be using windows xp because your driver is compatible with windows xp and for that your camcorder will recognize by your computer. after you insert the USB it should be appearing on your computer that something is connected on it and you should install the driver.
i will give you a step by step on your camcorder.
connect your camcorder using your USB cable to your computer and be sure it is ON
Install the cd driver camed with your camcorder. if you didnt prompt on looking for a driver then go to the add hardware on the control panel and follow the procedure there.
after the installation you should see the icon on the my computer labeled scanners and cameras and indicating the model of your camcorder.
Install Ulead Power Producer or any editing movie that you have like Windows movie maker, nero movier maker etc.. i prefer to use Ulead because its so easy to use
after uploading and editing your videos using ULEAD save it on any various types of videos that you like. you should see it after you want to save it.