Question about Intel Motherboard
I am facing a major problem with intel boards and it has killed alot of my precious time.
Intel Board 965RY
Processor 2.13 Ghz, 6400
Ram 1GB kingston
The problem is that after working fine whenever I restart the system after some time It dont give display and after taking out the cell and wating for an hour the computer turns on and works fine and in this process if we got no display then we have to recover the bios and in the recovering process it gives display and works fine for some time and after that few hours work and we have to shut down the system then the same problem and now we cant even recover the bios.
I have swaped every other thing in the computer and every thing is fine.
Intel has replaced this board and after some hours the new board showed the same problem.
Please tell me what is going on. is ther any way to solve the problem?
Some virus's can reside in the system memory. After doing a full scan shut down the system. Unplug the power cable. Pull your memory & wait about a minute. This will clear any memory resident virus being stored in your memory. Since you have run a virus scan I can't see the hard disk drive giving you an issue. On the other hand, if it were me. I would download the manufactures hard disk drive utilities software. Most allow you to download software that will allow you to create a bootable floppy disk or CD disk that will function in a DOS -like mode. Their hdd software can test the drive & look for any possible issue, than repair the drive if needed. If you decide to go this rout. disconnect all other hard disk drives & run the manufactures softare on one drive at a time. If you currently have data or windows already on the drive you can opt for option two. That is to boot the system to a valid windows CD. Allow windows to create another partition within the free space of your hdd. Install windows fresh. The reason for this fresh install will determin if your windows somehow became corrupt or another program within windows may be causing the system to shut down. Removing the cell as you have named it. Test the battery, it should hold 3volts DC. Make sure if you set the bios jumper to clear be sure to move it back to normal.
It is also very possible that your memory is getting too hot. This will cause your system to loose display. There is a place in the bios known as hardware monitor. Your board may have have this
Please see page 63 in manual for bios beep codes.
Posted on Nov 02, 2008
Tips for a great answer:
Aug 25, 2012 | Intel Motherboards
Nov 15, 2010 | Intel Motherboards
Mar 09, 2010 | Intel Desktop Board D845BGL Motherboard
Oct 06, 2009 | Intel Motherboard
May 29, 2009 | Intel D845GVSR Motherboard
Apr 06, 2009 | Intel S3000AH Motherboard
Nov 19, 2008 | Intel D946GZIS Motherboard
May 02, 2008 | GE Supermicro X6DA8-G E7525 EM64T S604...
Apr 25, 2008 | Intel D845GBV (BOXD845GBVL) Motherboard
64 people viewed this question
Usually answered in minutes!