Question about Lexmark Optra T612n Laser Printer

Open Question

LEXMARK OPTRA T612

SETTINGS HAVE CHANGED IT WON'T PRINT THE LAST 1 1/2 ON THE RIGHT HAND SIDE HELPPPPPP LOL I'VE ALREADY TRIED RESETTING VIA THE COMPUTER BUT IT'S NOT THE PROBLEM THERE ARE SETTINGS ON THE PRINTER W. OPTIONS FROM 1-6 PROBLEM IS WHICH ONE DO I SELECT???

Posted by on

6 Suggested Answers

  • 1 Answer

SOURCE: Lexmark Optra T612 says

Don't know if you solved this alread, but take a look at the 'exit flag' located just where the paper is spit out of the printer. If the exit flag is in the "up" position, just bring it down and that should solve the problem. If the exit flag is in the up position, this makes the printer think that the bin is full. Hope this helps. Either that or http://support.lexmark.com

Posted on Nov 04, 2009

printmastert
  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: Invalid engine code?

    Try putting the old fuser back and see if it gets rid of the error, then if that's the case the new fuser is defective. If not, here's a link to the Lexmark website which gives you instructions on what to do when having that "Invalid Engine Code" error message. http://bit.ly/9D61W3. Hope this helps. Let me know if you need more assistance.

    Posted on Apr 16, 2010

    jbutler9
    • 132 Answers

    SOURCE: How do I find my ftp of my Lexmark Optra T612

    though this is not a lemark site this works for me on my brother printer

    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpj06165

    Be sure to vote.

    Posted on Apr 22, 2010

    pineworks
    • 4041 Answers

    SOURCE: lexmark optra t612 keeps reading load mp feeder

    Hi there
    All this is down to is taking all the rollers off and gave them a good clean in worm water or try clean then in there place and make shure they all free running.
    All the best Pineworks

    Posted on Apr 29, 2010

    printmastert
    • 3344 Answers

    Creating Customers For Life

      Verified Fixya Pro

      SOURCE: Optra T612 fuser replacement

      Here's an article in the Lexmark website on How to Replace the Maintenance Kit Parts on an Optra T Laser Printer. Just click on this link: http://bit.ly/95cW2R. Scroll down for the instructions on how to replace the fuser unit. Hope this helps.

      Posted on Jun 30, 2010

      Printtech
      • 1087 Answers

      SOURCE: Firmware Download for Lexmark Optra T612

      Please access the website support.lexmark.com/printerfirmware, and then type key code prnname2 or optrateng to download the firmware.

      For further assistance, please contact Lexmark Technical Support.

      Posted on Jul 18, 2011

      Add Your Answer

      Uploading: 0%

      my-video-file.mp4

      Complete. Click "Add" to insert your video. Add

      ×

      Loading...
      Loading...

      Related Questions:

      1 Answer

      HOW TO REPLACE HVPS ON OPTRA T612


      Please see the attached photo for instructions on how to replace the High Voltage Power Supply for the Optra T Series.
      12_6_2012_10_33_19_pm.jpg

      Nov 25, 2012 | Lexmark Optra T612 Laser Printer

      1 Answer

      I need to obtain my IP address for this computer. Where/how do I find it?


      go to your menu press select
      network menu - select
      network option 1 - select
      network set up - select
      print - select
      print set up page - select

      Aug 12, 2011 | Lexmark Optra T612 Laser Printer

      1 Answer

      Firmware Download for Lexmark Optra T612


      Please access the website support.lexmark.com/printerfirmware, and then type key code prnname2 or optrateng to download the firmware.

      For further assistance, please contact Lexmark Technical Support.

      Jul 18, 2011 | Lexmark Optra T612 Laser Printer

      1 Answer

      Optra T612 fuser replacement


      Here's an article in the Lexmark website on How to Replace the Maintenance Kit Parts on an Optra T Laser Printer. Just click on this link: http://bit.ly/95cW2R. Scroll down for the instructions on how to replace the fuser unit. Hope this helps.

      Jun 30, 2010 | Lexmark Optra T612 Laser Printer

      1 Answer

      How do I print the meter page count on a lexmark t614,t612 and t520?


      Use the following steps.

      1. Press the menu button multiple times until you get to Utilities Menu.
      2. Press Select.
      3. Press menu until you get to Print Menus.
      4. Press Select.

      A Menu Settings page will print. Following all the menu settings a page count will be listed. This applies to all three models.

      Jun 23, 2010 | Lexmark Optra T612 Laser Printer

      1 Answer

      Lexmark optra t612 keeps reading load mp feeder letter wont pick up paper how do I fix this


      Hi there
      All this is down to is taking all the rollers off and gave them a good clean in worm water or try clean then in there place and make shure they all free running.
      All the best Pineworks

      Apr 29, 2010 | Lexmark Optra T612 Laser Printer

      1 Answer

      Invalid engine code?


      Try putting the old fuser back and see if it gets rid of the error, then if that's the case the new fuser is defective. If not, here's a link to the Lexmark website which gives you instructions on what to do when having that "Invalid Engine Code" error message. http://bit.ly/9D61W3. Hope this helps. Let me know if you need more assistance.

      Apr 16, 2010 | Lexmark Optra T612 Laser Printer

      2 Answers

      What would cause a 900 RIP code on a Lexmark T612?


      Go to http://support.lexmark.com/printerfirmware
      Locate the appropriate authorization code for your printer model from the following list and enter it:

      Optra S (4059) series printers: 4059engn.
      Optra T610, Optra T612, Optra T614, Optra T616 printers: optrateng.
      Lexmark T520, Lexmark T522, Lexmark T620, and Lexmark T622 printers: lextengn.
      Lexmark T630, Lexmark T632, Lexmark T634 printers: e551416.
      Lexmark W812: eng204


      We recommend you choose to save the file within a directory on your computer's hard drive.
      Once it has been saved, go ahead and run the file. The downloaded files are self-extracting ZIP files. Running this file will create a set of .PJL files and a file entitled Readme.1st. The Readme.1st file also contains directions for sending the file over through a parallel connection.

      Oct 30, 2009 | Lexmark Optra T612 Laser Printer

      Not finding what you are looking for?
      Lexmark Optra T612n Laser Printer Logo

      Related Topics:

      59 people viewed this question

      Ask a Question

      Usually answered in minutes!

      Top Lexmark Printers & Copiers Experts

      Roopesh S
      Roopesh S

      Level 2 Expert

      228 Answers

      Sanath Kumar V

      Level 3 Expert

      684 Answers

      Les Dickinson
      Les Dickinson

      Level 3 Expert

      18297 Answers

      Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

      Answer questions

      Manuals & User Guides

      Loading...