Question about RCA RCU300WBL Remote Control

Open Question

RCA Remote Code for Symphonic tv model #WF203

I bought a RCA Universal remote for our Symphonic tv. Tried all the codes for that brand, plus followed steps where the remote goes through every code and it still is not working. RCA model # RCU404B.

Posted by on

  • Anonymous Dec 08, 2008

    I have the same problem. I can not get the remote to work.

×

5 Suggested Answers

IrishDruid
  • 2712 Answers

SOURCE: tv codes

Apex -0156
Symphonic - 0171

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. -You can rate this solution with one of four votes, if you feel your issue is resolved (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 08, 2008

elliljoker92
  • 134 Answers

SOURCE: can my rca universal remote control my convertor box

Code 025 for Magnavox i hope it works

Posted on May 05, 2010

  • 286 Answers

SOURCE: remote control code/daenyx tv/dvd combo

Your TV is made by Daewoo and is distributed by Daytek. If you call the 800 number on the warranty card you will reach Daytek.
So, what you need to know is this:

#1. A lot of new products won't have a website available. That does not say anything to their quality or the company, just that you've bought a new product and you're one of the first purchasers.

#2. A lot of times if you buy a "no name" TV, you're actually getting components inside the TV that are made by brand name manufacturers. For example, "Prima" uses LG panels in some of their plasma TVs (as well as Daytek). How do I know this? Because I'm the authorized service provider for Daytek, and Prima and quite a few other "no name" TVs, and I've been working on LCD and Plasma since they came out, as well as having worked in the electronics repair industry for over 20 years. I own an Insignia 42" LCD and am quite happy with it.

#3. Most new products that have remote controls will not have codes available for them no matter what brand of universal remote you buy. You have to wait for the people who make the universal remote to have time to make a code for this new brand of TV. This can take up to a year for cable companies, and cheaper universal remotes may never get the code. Expensive universal remotes may be able to have their firmware updated through the internet, so adoption of new codes for new products may happen faster.

#4. Stores like Walmart and Costco are excellent places to buy products like this because they usually have a "no questions asked" return policy if you get the TV back to the store within the stores time limit for returns (some stores are 15 days, some are 30 days, phone the store and ask them). I had purchased a 40" Digistar LCD TV from Walmart what had a flickering problem, I took it back the next day without any problem at all. Then I bought a 42" Insignia Plasma TV from Future Shop that I wasn't happy with. I took it back 3 days later and had no problem at all. As long as you know the stores policy for returns and follow the policy, you won't have any problems either.

#5. Try to avoid buying big-ticket items from smaller stores unless you know their return policies. Some smaller stores will not accept returns on LCD monitors, TVs or plasma TVs but instead require you to handle any problems through the manufacturer.

#6. Best bet it to call Daytek and ask them if they know of any universal remotes that work on that particular model.

Posted on Dec 29, 2007

  • 1 Answer

SOURCE: tv codes

i have a super scran tv, lost code for my tv


thanks for some help

Posted on Jan 16, 2008

aprmaejun
  • 97 Answers

SOURCE: RCA RCR311W Universal Remote Code for LXI TV

From what I can tell, it could be any of these codes:

1000
1006
1048
1049
1062
1072
1073
1100
1109
1130
1162
1181
1203
1212
1233

I used this website:
http://tv.rca.com/RCATV/NewTV/Templates/GenericSupport.aspx?NRMODE=Published&NRORIGINALURL=%2fen-us%2ftechnicalsupport%2ehtml&NRNODEGUID=%7bCDBA69CE-8CEA-435A-8F62-C5E6DBE1ACF6%7d&NRCACHEHINT=NoModifyGuest#

Posted on Jun 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I use an RCA Universal Remote RCR4258R for a symphonic brand television


Well you need to program it with the codes for that brand of TV. The other method is to use the "Code Search" option on the RCA remote.

Jan 27, 2017 | RCA RCR4258R 4-device big button universal...

1 Answer

Rca universal remote code for a symphonic tv


0017,0014,0026. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

Nov 29, 2015 | RCA Universal Remote Control

1 Answer

Code symphonic tv


Setup codes to Symphonic Brand TVs with GE universal remote control are: 0053 0189 0227 0456 0024. If you wish to get more codes to different other brand remote controls, check these links. http://electrohelponline.blogspot.com/ http://electronicshelponline.blogspot.com/ Setup code list to many popular remote controls are given.

Jun 12, 2013 | RCA RCU1300 Remote Control

1 Answer

Whay is the universal remote code for this model


Hello
Three digit universal remote codes for symphonic are:-
033/ 053/ 189
Four digit universal remote control codes for symphonic are:
0053 0189 0227 0456 0024

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK

Mar 20, 2011 | Symphonic ST419E TV

1 Answer

Hello can you gayz tell me how to gat cod for universal remot control my tv is HCT TV/DVD COMBOS


Hello

Three digit universal remote code for Symphonic Tv are:
033/ 053/ 189
Four digit universal remote codes for Syphonic TV are:-
0053 0189 0227 0456 0024

Four digit universal remote code for Symponic tv/vcr combo is
0227
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search
Ok

Jan 15, 2011 | Symphonic SC309C 9 in. TV/VCR Combo

1 Answer

Need codes to remote to turn on my symphonic tv


Hello

Three Digit Universal Remote codes for Symphonic TV are:-

033/ 053/ 189

Four Digit Universal Remote control coldes for Symphonic Tv are:-

0053 0189 0227 0456 0024

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
Ok.

Dec 03, 2010 | Televison & Video

1 Answer

What is the code for a symphonic tv and a rca remote. I also need insructions on how to program the remote that works with my tv. I lost the instructions


These are the steps on how to program your RCA Universal Remote Control to your Symphonic TV.
  1. Press and "HOLD" CODE SEARCH.
  2. Press and release the TV button. When the TV button flashes proceed to the next step.
  3. Enter the three digit code. In your case, the code for the Symphonic TV are 064 or 076.
  4. Release CODE SEARCH.
  5. With the TV on, press another button, for example CHANNEL UP. If the TV responds, no further programming is required. If the TV does not respond, repeat steps 1-5 using the other code number.

Jun 12, 2010 | RCA Universal Remote Control

1 Answer

Rca rcr4258 universal remote code for symphonic st4819


Try the code settings for Funai; they build a lot of store-brand items.
You may not have all functions but normally you can find a code that will give you control of Power on/off, channels and volume.

Apr 09, 2008 | RCA Universal Remote Control

2 Answers

Broksonic TV code for RcA RCU704 remote control


I had a similar problem with a 1994 vintage Broksonic TV. I called the company (Hatzlachh Supply Inc. @ 800-333-9099). Broksonic TVs are not compatable with any universal remotes! You need an original factory remote. Remote for my set cost $20.00 plus shipping for a total of $24.95.
James Benson

Dec 26, 2007 | RCA 257003 Remote Control

Not finding what you are looking for?
RCA RCU300WBL Remote Control Logo

Related Topics:

3,147 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73118 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...