Question about PC Desktops

1 Answer

Dismantle display on compaq nc4010 - PC Desktops

Posted by on

  • Scott McIntyre
    Scott McIntyre Jan 25, 2009

    I have the same problem. Did you find a solution? the hinge broke and I am attempting to remove the broken pin from the monitor and it will not slide out.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

The front sides of the lcd will pry apart from the back side , but the back side will remain attached to the lcd screen by screws


Posted on Nov 01, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My hp compaq says this Weird Sound, it an hp compaq SG3 Series... Any solution without spending an farm of money

The disc in the HD is loose, you will need to dismantle it and tighten the screws, I have heard discs 100% worse on youtube, if its not stopping the pc, ignore it. youtube has intructions on this subject.

Jan 26, 2013 | PC Desktops

1 Answer

Compaq evo display at only 4 bit systm does have

Here is the link of your driver...

Oct 12, 2009 | Compaq Evo D510 PC Desktop

1 Answer

HP Compaq Presario SR2013WM ...Power Problems ?

Unless the power button sticks or does not pop back out, i doubt the issue is in the switch, but it can be tested by replacing it with a momentary switch from Radio Shack (not an exact fit, but good for testing)
This sounds like a power supply issue. That would be the first thing to check. If it is NOT connected to anything except the power cord , it shouldn't run unless switched on.
Could also be the motherboard, but before you start dismantling the computer , check the obvious. Open the case (usually to screws on the back) inspect all the cables, reseat your ram chips and addin cards.
Not to scare you ar anything, some of these presarios have bad capacitors on the mother board. coupled with the fact that they are difficult to clean (inside) and airflow is not maximized in the case, they tend to cause the capacitors to swell and leak, losing voltage.
When you are inspecting the insides of your case, take note of any capacitors (little cans with crosses on the top) on the main board inside around the CPU fan that are swollen or leaking.
If you find these in bad condition , i would replace the motherboard.

Apr 04, 2009 | HP Compaq Presario SR2013WM (RE468AA#ABA)...

1 Answer

Compaq nc4010 needs a reload

Reload? You need to reinstall the os?

Apr 20, 2008 | PC Desktops

1 Answer

The usb ports on my port replicator don't seem to work. Model is PR1005 and the laptop's an HP NC4010. Is this a driver issue, or a problem with the PR1005 ?

Check your usb driver in your system. it's installed than you try to check other usb device, otherwise you have to change your system's usb port. Have a good day.

Apr 15, 2008 | PC Desktops

1 Answer

Compaq Presario R3140 Won't boot to

hmmm..not too good..sounds more like a hard drive issue. do you have the original install cd around? if so, put that in the cd player, and let it boot to that, or use F8, and do a safe mode operation.

Feb 17, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides