Question about Nike Triax CV10 Wrist Watch

2 Answers

Can Link watch with Heart Monitor

Have a Nike Triax C10 very similiar to the CV 10 that you have on your site. I can not seem to get my watch to link with my hear monitor. The directions seem simple enough but I have tried dozens of times with no success. I have replaced both batteries just to make sure. I reset the watch, scroll to run on the watch. I hold on to the heart monitor with the sensors in the palm of my hands and the link flashes on the watch face and when the 10sec expires I get a 51-L00 reading at the bottom. I bought this watch on ebay and it worked great all summer and then one day there was no connection between watch and monitor. Now I can't get them to link again. There is nothing in the directions about 51-L00, so I don't know what it represents. Can you help? Thank you. Heff

Posted by on

  • 1 more comment 
  • Ricmendez Apr 17, 2008

    I have the same problem, I did follow the instructions but it doesn´t work. I have been looking for the SMA011 chest strap model to replace it, but I can´t find it. Any idea ?. Thanks.

  • tmisenhart May 30, 2008

    I replaced battery and the watch will not sink with the heart monitoring strap. I have tried everything any suggestions

  • Anonymous Mar 25, 2014

    Impulse sport

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

If you can't link the hrm do as detailed in the following link If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit. Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button. The re-initialisation steps for the Nike C10 and CV10 digital HRM's is: (1) reset the watch (2) open the battery door on the chest strap (3) move the watch to RUN mode (4) press the reset button in the chest strap battery area (5) put the battery back in the chest strap (if it's not already in - it's possible to push the button without removing the battery) (6) hold both of the electrode to create a signal (probably not necessary - it usually links immediately). My suggestion is to use a very thin needle and do it with the battery in the hrm. Eventually, Nike will either eliminate the hard reset or update the manual to include this info.

Posted on Apr 20, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Lorenzo's solution is pretty much it - but it seems it may not work if the Triax is near a computer ... having had a lot of trouble and frustration, by moving away from the compter and pushing the reset button WITH THE BATTERY IN THE CHEST STRAP I got an instant connection

Posted on Jan 19, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the time display


Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all NIKE watch manuals.Rate me, please.

Mar 31, 2010 | Nike Triax CV10 Wrist Watch

2 Answers

Can I run Nike Triax Elite software in Windows 7. I have a USB driver problem.


I had to take the following steps to get it to work in Windows 7 after running the setup executable under the Comments in the Windows row from http://www.ftdichip.com/Drivers/VCP.htm

  1. Open up Device Manager, right click on the Triax Elite and select Update Driver Software.
  2. Select "Browse my computer for driver software" in the window that pops up.
  3. Click "Let me pick from a list of device drivers on my computer."
  4. Scroll all the way down the list of "common hardware types" to USB controller.
  5. Choose FTDI from the list of manufacturers and choose the "USB Serial Converter"
  6. Confirm that you know what you're doing and want to install this driver.
Windows then finds another Unknown Device which is the serial port. Repeat as above but choose Ports for the common hardware types and then FTDI and "USB Serial Port".

Afterwards, run the latest Nike Triax Elite software (that you can download from http://www.nike.com/timing/extranet/elite_software/ and it should work.

Jan 24, 2010 | Nike Triax Elite Hrm/Sdm Heart Rate...

1 Answer

I have a Nike Triax watch and the strap broke. The strap is held on with pins. How do I get a replacement?


Use this link:

http://www.nike.com/timing/?sitesrc=USLP

Select your region, then select support and get the answers. You may try retail locator as well.

Rate me, please.

Jul 29, 2009 | Nike Watches

1 Answer

Nike heart rate monitor triax c5


I was able to view the instructions here: (no title)
http://www.klokker24.no/ressurser/1183.pdf

Nov 17, 2008 | Nike Triax C5 Wrist Watch

2 Answers

Strap Replacement


Maybe you can use it on an armband like with an iPod. Even with velcro.

Jul 24, 2008 | Nike Triax C5 Wrist Watch

2 Answers

Heart monitor


If you have the cheststrap then you don't need anything else. If you don't have the cheststrap piece then you need one. The watch itself does not moniter your heart, It only reads the signal being sent by the moniter on the chest strap.

Mar 28, 2008 | Nike Triax C5 Wrist Watch

1 Answer

Nike triax speed WR0082 regular


You must Re-Link the SDM pod to the watch after changing the battery. Go to the link below, It's not the exact model, but, should work, if not, go to www.nike.com and download the manual for your model.
GOOD LUCK
http://www.nike.com/timing/extranet/product/triax_elite/elite_manual_eng.pdf

Aug 25, 2007 | Nike Triax Speed WR0085 wristwatch

3 Answers

Triax CV10


Nike Triax CV10 - Successful HRM reset 7 November 2008
 
I had real problems too. Even after repeatedly following the known reset steps everyone else is posting up. Here’s how I got mine going, please forgive the mind bogglingly tedious detail…
 
First make sure you’re using new good quality batteries. I used Maxell’s, bought in 10’s from Hong Kong on ebay – no problem.
 
Second, and this is the ESSENTIAL bit…move right away from the computer and any other electromagnetic sources before carrying out the known reset…
 
Third, follow the known reset steps below, adjusted to what worked for me…
 
If you press all four buttons of your Nike HRM it will reset. Next time you go to "RUN" mode, it will show "HRM LINK" error. You will now need to "hard reset" the unit.
 
Nike made a late change to add a "hard reset" to the chest strap. To re-link (re-initialise) the watch you'll need to open the battery door on the chest strap, and use a paper clip (or the equivalent) to push the small gold button in the battery area. There should be a small sticker in the battery compartment that points to the reset button.
 
The re-initialisation steps for the Nike C10 and CV10 digital HRM's is:
 
(1) reset the watch
(2) open the battery door on the chest strap
(3) move the watch to RUN mode
(4) press the reset button in the chest strap battery area without removing the battery
 
Tip - I agree with the suggestion to use a pin or needle and definitely do it with the battery in the hrm.
Tip – Thumb holds battery to stop it from pinging out, other hand performs jiggle with pin until the link is made (it links straightaway if you jiggle it just right!)
 
(5) replace chest strap battery cover…and smile!

Nov 30, 2006 | Nike Triax CV10 Wrist Watch

Not finding what you are looking for?
Nike Triax CV10 Wrist Watch Logo

782 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nike Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

TIME TRACK SERVICES
TIME TRACK SERVICES

Level 2 Expert

90 Answers

Are you a Nike Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...