Lexmark x 1100

Make sure the Lexmark X1100 Printer Driver is installed on your computer.
If the printer driver was already installed and working with your computer, please follow steps below:
A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC.

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.
6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list again, then try to print again.

First thing you need to do is uninstall the current software and printer.

Then go to: X1100 Series Driver

Select your operating system...Vista...from the drop down menu.

The next page has the link to download the driver. (It should be cjrX1100EN.exe. Click on "Download Now".

When you begin the download and the download window appears, select "Save" and direct the download to save to your desktop.

After the download is complete, close all the windows, or other programs.

Make sure your printer is ON but also that the USB cable is DISCONNECTED. Double-click the file on your desktop that you downloaded. When prompted by the software, connect your USB cable.

That should do it. If you run into any problems, just comment back.

Thanks for using Fixya.

follow the link and select which vista you are running.
http://downloads.lexmark.com/perl/downloads/downloads.cgi
Mark

Hi!

I took a look for that printer, and you cant make it work coz that 1100 isent compabile with vista. There are some models in that 1100 serie, but the 1100 isent one of them. Here is the ones that works with vista:
X1110, X1130, X1140, X1150, X1155, X1160, X1170, X1180, X1185, X1190, X1195
As you can see yours isent one of them, thats what they say on lexmarks site to.
http://www.lexmark.com.au/lexmark/sequentialem/home/0,6959,239544855_1019285789_0_en,00.html

Sorry M8, your printer is only for those OS: Windows 98/Me/NT/2000/XP

Good luck
Nic

In this case what i would Request u to do is......... Goto Control Panel goto Printers folder......... There u will see the Lexmark Printer Icon........... Just right click on the Printer Icon and click on Properties......... Now click on Advanced and goto Print Processor......... Change it to Lexmark X1100 and NTEMF 1.0008........ Click on Apply click Ok now try to Print.......... Prints Fine............Issue Resolved........

In this case what i would Request u to do is......... Goto Control Panel goto Printers folder......... There u will see the Lexmark Printer Icon........... Just right click on the Printer Icon and click on Properties......... Now click on Advanced and goto Print Processor......... Change it to Lexmark X1100 and NTEMF 1.0008........ Click on Apply click Ok now try to Print.......... Prints Fine............Issue Resolved........ Same Problem........ Download the Lexmark ToolBar from: http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_1255995709_0_en,00.html

Restart your computer once and now try to print using the Lexmark Tool Bar.......... It should work fine........ Good Luck..............

you can get it here http://www.radarsync.com/software/s205764-lexmark_x1100_series just click on the download latest version box ( green with blue arrow ) on the right hand top

electech

The lexmark site has the drivers! I had the same problem, just go to their support page, and download the drivers/software.

Drivers and Downloads

lexmark


riz.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading,find the file,double click on the file with the mouse, if you get in troubles ,then follow instructions below to reset and reinstall:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website and run the file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:some printer does not work on Vista