Question about MGE Pulsar Ellipse 800 (89363) UPS System

1 Answer

NO POWER INDICATION

IT SEEMS TO BE DEAD.

Posted by on

1 Answer

Check the batteries status. To do this, the UPS has a door on the left side if it's laying horizontally with the power switch in front. Use a flat head screwdriver to unlock the latch located in direction to the front feet in the side door. The batteries should measure something like 12~12.6V otherwise the UPS will not start or show any sign of power.

Posted on Oct 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my tripp lite 500 only working on one side?


Go to Tripp Lite web site to troubleshoot the problem. Surge suppressor might have blown.

Jul 25, 2014 | Tripp Lite UPS Battery Backup Systems

1 Answer

The Alarm Indicator and Battery indicator is red for a faction of a second and the PC is turned off. Is the battery problem?


Hi Roger,

Yes, that seems to be the issue. The power to your UPS is interrupted and when it tries to switch to battery it dies instantly because the battery is dead.

Call me if you would like affordable battery pricing, or if you would like more assistance -- 407.380.9200.

Oct 30, 2013 | MGE NOVA AVR 1100VA Tower UPS 81111 UPS...

1 Answer

APC power supply. My backup power supply "online"


How old is the unit? They only last so long before the battery can charge no more.

Dec 30, 2010 | APC Back-UPS CS 500VA UPS System

1 Answer

Ups does not power up. the power indication light does not light.


Depending upon how old your UPS is, it may need new batteries. To get help, you will have to contact APS or if you have a local Batteries Etc or other battery retail store that can check the unit for you. Without checking the battery condition and running diagnostics, there is not a lot that can be done to give you a better solution.
Hope this helps.
Let me know what you find out. Thanks.

May 19, 2010 | APC Smart-UPS 1000VA UPS System

1 Answer

The unit beeps


I am getting these directly from the user manual (available here: http://www.apcmedia.com/salestools/ASTE-6Z7VAQ_R3_EN.pdf)

Issue: On Battery - UPS is supplying battery power to the load connected to the Battery outlets.

Visual Indication: Power On LED - ON (off during beep)

Audible Indication: Beeping 4 times every 30 seconds

Stops When: UPS transfers back to Power On operation, or when UPS is turned off.

- OR -

Issue: Sleep Mode - During On Battery operation the battery power has been completely exhausted and the UPS is waiting for utility
power to return to normal.

Visual Indication: None

Audible Indication: Beeping once every 4 seconds

Stops When: Utility power is restored, or if utility power is not
restored within 32 seconds, or the UPS is turned off.


All other issues are CONSTANT tones, which you did not specify, or there are no audible tones associated with it.

Apr 07, 2010 | APC Back-UPS ES 350 - UPS ( external ) -...

1 Answer

Dead appearing ups/inverter


keep on your main switch. off all the lights fan and other electrical items, let that inverter get charge first

Jun 18, 2009 | APC Back-UPS CS 500VA UPS System

1 Answer

Ups power and charging problem


how old is your UPS? It seems that you need to replace the battery.

Apr 27, 2009 | APC Back-UPS ES 350 - UPS ( external ) -...

1 Answer

Ups is not glow any indication, just give buzzer sound , APC make 2000va RS model kindly tell me what i can do to repair it.


It look like dead battery. Try to connect carefully new (or allmost new) battery with 24v lamp in (+) wire. If UPS alive - you'll see only small momentary sparcle. After this - connect battery as usual and try to turn system on. Be carefull! If lamp lit in full power - it means a serious internal problem. Best solution - look for qualified serviceman. (maybe yoir system needs reprpogramming).

Apr 13, 2009 | APC Back-UPSĀ® CS 500 UPS System

1 Answer

APC Smart-UPS 1400 no power


Better late than never...

The older Smart UPS models are peculiar in the way that they appear dead (will not power on) if the battery is completely bad.

Replace the battery, and the UPS should come back to life.

Jul 01, 2008 | NEC APC Smart-UPS 1400 (050-01803-000) UPS...

Not finding what you are looking for?
MGE Pulsar Ellipse 800 (89363) UPS System Logo

Related Topics:

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top MGE UPS Battery Backup Systems Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a MGE UPS Battery Backup System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...