Question about Omron HBF-400 Fat Loss Monitor with Scale

2 Answers

Tanita, the Ultimate Scale

I have a scale that is measuring kg's rather than lb's. How do I change to lb.'s

Posted by on

  • Anonymous Nov 16, 2008

    i need to convert readings from Kg to lb.

  • Anonymous Mar 24, 2014

    I lost the manual and now the scale does nothing but flash lb at me. When I stand on it nothing happens.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The scale may have instructions on the bottom of the scale. (Example for the Tanita: The Ultimate Scale w/ the body fat analysis). The instructions on the back state the following steps: Step 1: press both the "Set" and the triangle buttons. Step 2: press the "triangle" button until you select the appropriate weight measurement (a) kilogram, (b) stone lbs or (c) lbs. Step 3: press the set button.

Posted on Nov 20, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

How can change lb to kg scale

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed batteries and now the scale does not read correct weights. off by more than 40 lbs


You might wanna double check that your scale is set to the right measurement. On the bottom of the scale is a switch that allows you to choose between Kg (kilograms) or LB (pounds).

Jan 18, 2010 | Conair WW60 Weightwatchers Scale

4 Answers

How to calibrate a Pelouze model 4010 scale with a


from http://sites.dymo.com/Search/Pages/SupportSearchResults.aspx?k=4010%20calibration&start1=0

4010 CALIBRATION (newer models) released 12/8/95
1. Press and hold the ZERO and lb/kg keys simultaneously.
2. Press and release the ON key while still holding the ZERO and lb/kg keys.
3. Continue holding down both keys until display shows CALB.
4. Press ZERO to reset and apply 130 pounds to the platform
- display shows a count which must be greater than 500.
5. After the count stablizes press the lb/kg key to save this value.
- display now shows END.
6. Press OFF to turn scale off

Calibration instructions for Older Model 4010 (with a date code of 5103 or older)
1. You will need 3 – 50 lb weights to calibrate this scale
2. Turn off scale
3. Press and hold the LB/KG and the ZERO button simultaneously and
continue to hold till instructed in step 5
4. Press and release the ON button
5. The unit will display a number. Release the LB/KG and ZERO buttons. You
will see a number on screen. Press the ZERO button and you will see C50
6. Place the 50 lb weight on the scale and press ZERO. You should see C100
7. Place another 50 lb weight on the scale (total 100 lb) and press ZERO. You
should see C150.
8. Place the remaining 50 lb weight on the scale (total 150 lb) and push ZERO
9. You will see a final message (end) and the scale should shut off
Your scale should now be recalibrated

Jul 08, 2009 | RTO Pelouze Scale With Remote Display -...

1 Answer

Tanita Ultimate Scale 2001 - no user manual -how to set it?


does your scale have an orange SET button and a button with a triangle (or arrow) below the display?

Try this... make sure the scale is turned off. (and you are not standing on it)

Now press the SET button.
2 arrows should appear on the display. use the arrow/triangle key below the display to make changes and the SET key to choose.

If you have the same scale as me, you are prompted to chose Adult/Child followed by Male/Female, and finally input your height in feet/inches by pushing the arrow/triangle key until the display shows the desired height.

Press SET to finish and step on the scale like you usually do. It will now show your weight followed by your body fat %.

Hope this helps you!

Jacob

Apr 08, 2009 | Scales & Body Fat Analyzers

3 Answers

Somehow my tanita ultimate scale has been switched from pounds to stones. How can I get it back to pounds?


Q: Why does "st-lb" or "kg" appear when taking a measurement?
A: The unit's "Weight Mode" has been set to measure your weight in units of stone-pounds (st-lb) or kilograms (kg). Tanita's Body Fat Monitors and the UltimateScales can measure weight in three different modes: lb (pounds), kg (kilograms) or st-lb (British stone-pounds). To change the setting, first find out which model you have (it should be written just above or below the display screen of the unit).
Method 1
Body Fat Monitor/Scales: TBF-611, TBF-612, TBF-621, TBF-622, BF-541, TBF-560, TBF-572. UltimateScales: 2000, 2001, 2001T. BF-662, BF-555, BF-556, BF-558, BF-559, BF-625, BF-626.
Press the Set and Up Arrow buttons at the same time. Release the buttons, the display will flash. Press the Arrow button to cycle through each weight mode until just the mode that you require is displayed. Then press Set. The display screen will flash to confirm your selection and store in memory.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches. Similarly, if kilograms is selected, height will be automatically set to centimeters.
Method 2
Body Fat Monitor/Scales: BF-542, TBF-551, TBF-521, TBF-531, BF-681, BF-682, BF-679, BF-680, BF-578, all Ironman products, and all InnerScan products.
Select the preferred weight mode by using switch on the back of the measuring platform.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches. Similarly, if kilograms is selected, height will be automatically set to centimeters.
switch_2.gif

Mar 15, 2009 | Scales & Body Fat Analyzers

3 Answers

Scales show weight in kg. How to get them to show lbs.


Body Fat Monitor/Scales: TBF-611, TBF-612, TBF-621, TBF-622, BF-541, TBF-560, TBF-572. UltimateScales: 2000, 2001, 2001T. BF-662, BF-555, BF-556, BF-558, BF-559, BF-625, BF-626.
Press the Set and Up Arrow buttons at the same time. Release the buttons, the display will flash. Press the Arrow button to cycle through each weight mode until just the mode that you require is displayed. Then press Set. The display screen will flash to confirm your selection and store in memory.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches. Similarly, if kilograms is selected, height will be automatically set to centimeters.

Mar 13, 2009 | Tanita 2204 Body Fat Scale

1 Answer

Conair ww17 scale measures in kg not lb.


There is a switch on the bottom of the scale on mine to use either lb. or kg.

Dec 11, 2008 | Conair Large Digital Display Memory...

2 Answers

Tanita 2204 Scale weight reading problems


Try the following steps:

1) press both the "set" and the triangle button
2) press the triangle button until you get the desired unit of measurement: a) Kilogram, b) stone lbs or c) lbs; and
3) press the "set" button.


Nov 16, 2008 | Tanita 2204 Body Fat Scale

Not finding what you are looking for?
Omron HBF-400 Fat Loss Monitor with Scale Logo

2,364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Omron Scales & Body Fat Analyzers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Ankit Chandel
Ankit Chandel

Level 2 Expert

127 Answers

creative_lac

Level 1 Expert

9 Answers

Are you an Omron Scale and Body Fat Analyzer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...