Question about Air Conditioners

1 Answer

Error E559 on air conditionner Samsung MH026FWEA

I get 2 samsung MH060FXEA4B on wich are connected 4 samsung MH020FWEA and 2 MH026FWEA. they are on heating mode at 20°c. This morning one of my air conditionner Samsung MH026FWEA has stopped whith an E559 error code. I do not find the meaning.
If i switch on the device, it stop after ten seconds again with same code.

Posted by on

  • 1 more comment 
  • Anonymous Mar 26, 2009

    I had the EXACT same problem, even though I don't know my model number.

    I called the technician, and from what I understood, all he had to do was reset the outside unit, and everything was back to normal. Paid him almost $200 for 20 minutes work :(

    You can reset the units. If you don't know how, I believe you can ask for help here on fixya.

  • Joaquim Pena Jan 21, 2013

    I have 4 units of MH052FPEA Samsung to one Unit MH080FXEA4, and i have the same error problem (E559). How to reset samsung MH080FXEA4 exterior unit?

  • Pedro Maia Jun 17, 2013

    Any idea how to do it Joaquim?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Go to your outside unit and press the K3 button.

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashing light the at says e6


Usually Indoor Unit Anti-freezing protection (Cooling
Mode) or Over-heating Protection (Heating Mode)
for Evaporator
A) Indoor room
temperature too low
under cooling mode,
Too high under
heating mode
B) Indoor unit filter or
evaporator too dirty
C) Indoor unit fan motor
blocked
D) Insufficient refrigerant
under cooling mode
E) Indoor unit evaporator
sensor wrong
connection or failure

Jul 28, 2014 | Samsung AQV12VBE Vivace Wall Heat Pump Air...

1 Answer

Morning, I got a external unit SH24BP2X samsung fro air conditionning, and I'ld like to buy an indoor unit. Is anybody can give me ref which match with this unit. I need 5/6 kw heating power. Thanks...


The 24 in your model number means 24,000 btus. There is 12 thousand btus in a ton of cooling. This makes your unit a two ton. You can buy a air handler sent up for two tons of cooling and then buy what every electric heat pack that you need. let me know. wally

Mar 16, 2011 | Samsung Air Conditioners

1 Answer

I av lost my manual. Pls kindly give me details on each of the samsung split AC 5way. I mean what each symbol means


To get proper cold air set temp 23 degree and mode"cool". To get heat set temp 30 degree and mode in "Heat"
Now symbols:
1. fan leaves - Fan only
2. Rain drop- Dry mode
3. Snow flake-Cool mode
4. Sun- Heat
5. A or AU- Auto mode.Helpful?

Jan 19, 2011 | Air Conditioners

1 Answer

Hiiiii..... I have samsung Thermostat AC, But i dont know how to use the warmer / heater for the same. I dont know about the model number but its one of the old AC written thermostat. Now help me out how...


Symbolsin remote: To get proper cold air set temp 23 degree and mode"cool". To get heat set temp 30 degree and mode in "Heat"
Now symbols:
1. fan leaves - Fan only
2. Rain drop- Dry mode
3. Snow flake-Cool mode
4. Sun- Heat
5. A or AU- Auto mode.

Jan 03, 2011 | Samsung AW1203B Air Conditioner

1 Answer

What mode do I set my remote in for heat?


You can press the mode button until the indication in on the icon wich look like a sun, a circle with lines around it

Dec 24, 2010 | Mitsubishi Mr. Slim MXZ30TN Air...

1 Answer

I have a westinghouse window unit and I think it has heat strips for the heat. How do I tell if it is a true heat pump or if it has heat strips and how do I get to the Heat strips in the unit to check.


If it is a heat pump, the compressor will be running both in cool mode and in normal heat mode.

Confirm the current indoor temperature. Turn the thermostat up one degree at a time until it comes on. This will typically be 1 to 4 degrees increase. As soon as it comes on stop increasing the temp.

If the compressor is running, it is a heat pump.

Check the temperature coming our of the vents at that time. You should have 30 to 60 degrees increase from the air temp going into the unit and the conditioned air temp coming out.

Then turn the T-stat up another 10 degrees. If the temp coming out of the vents increases by 20 degrees or more. the strips are on.

The strips operate in three situations.
1) the system is set to emergency heat
2) The heat pump cannot keep up with the demand for heat. (because its too cold outside, the desired temp setting is greater than 4 to 8 degrees above the room temp, or the HP is malfunctioning.)
3) The HP is in defrost mode

You could also take the panels off the unit and look for a reversing valve, but unless you know what you are looking for you will not recognise it.

Oct 12, 2009 | Air Conditioners

1 Answer

Heat pump turns on and off in the heat mode


Check both coils. If they are dirty have them cleaned.

Jan 17, 2009 | Air Conditioners

1 Answer

Dometic ac/heat pump


Would suggest it is drawing excessive current, make sure both fans are going, (inside will cycle low/high), or possible faulty reversing valve solenoid, or could be as simple as loose wire connection, how long does it run for and is it on the same 20amp breaker as the rear?if so start by running only the front unit in cooling 15/20min, check fans running, no unusual bearing noises, switch off for 60 sec then back on heat mode, if unit runs without stopping rewire onto separate circuit, if inside fan not working on heat check bi-metal switch in the airway, if running for a while, fans going but not very warm, check reversing valve.
Note, electrical's should be tested by someone who are qualified in the field.

Nov 05, 2008 | Dometic Rooftop RV Air Conditioner

1 Answer

New install. 40 seconds on. 20 seconds off.


Its normal that the air coming out is warm cause you set it to heat mode. Check your setting temperature, it is normal for the unit to shutdown when it will attain the setting temperature and operate when the temperature is lower than the setting temperature(heat mode).

Mar 05, 2008 | GE Quiet-Aire Ductless Split System Air...

1 Answer

I WANT TO BUY THE UNIT WHICH CHANGE HEATING AND COOLING AND TEMPERATURE UNIT FOR GE ZONELINE


WITH ANY OF THESE UNITS YOU CAN WIRE AN EXTERNAL THERMOSTAT WICH WILL ACOMPLISH THIS, JUST MAKE SURE YOU PURCHASE A T-STAT WITH A HEAT / COOL AUTO CHANGE OVER.

Jan 10, 2008 | GE Zoneline AZ38H12DAD Split System Air...

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

3,458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Conditioners Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Bill Long

Level 3 Expert

577 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you an Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...